Brother International HL-1660E Service Manual - Page 57

1.12 Paper Feed Chassis Unit (1) Pull out the unit by loosening the 8 screws (4 screws for front and 4 screws for bottom). Paper feed chassis unit Screws Screws Note: When installing the paper feed chassis unit, screw the left chassis of this paper feed chassis unit, set the paper tray, displace the right chassis of this unit up to the paper tray and screw them. (2) Remove the paper hold front and paper hold rear by pinching the pawl of the paper hold front with pliers. Pliers Paper hold front Screws Paper hold rear Figure 4.21 Screws (3) Release the left cartridge hold roller and remove the cartridge guide L (by loosening the screw and releasing the hook) then pull out feed flat cable 20P. Cartridge hold roller Feed flat cable 20P Hook (the rear side) Cartridge guide L Figure 4.22 IV - 10 Screw