Brother International HL-1660E Users Manual - English - Page 75
MODE Switch Settings in HP LaserJet, EPSON FX-850, and, IBM Proprinter XL Modes, and IBM Proprinter
View all Brother International HL-1660E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
USER'S GUIDE MODE Switch Settings in HP LaserJet, EPSON FX-850, and IBM Proprinter XL Modes The following table shows all the selections you can make with the MODE switch in the HP LaserJet, EPSON FX-850, and IBM Proprinter XL modes. Note The mode menus and settings that can appear vary according to the current emulation mode, printer status, and any options that may be installed in the printer. Mode Menu INTERFACE MODE (See 4-17.) Setting Menu I/F=PARALLEL I/F=RS-232C I/F=USB (HL-1660e only) I/F=OPTION I/F=AUTO Sub-Setting Menu HIGH SPEED=ON BI-DIR=ON BaudRate= 9600 CodeType=8 bits Parity =NONE Stop Bit=1 bits Xon/Xoff=ON DTR (ER)=ON Robust Xon=OFF exit Setting ON or OFF ON or OFF 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200 baud 7 or 8 bits NONE, EVEN, or ODD 1 or 2 stop bits ON or OFF ON or OFF ON or OFF Exit to INTERFACE MODE Available only when a commercial MIO card has been installed. MIO Setting The settings available on the installed MIO card can appear under the sub-setting menu. exit Exit to INTERFACE MODE TIME OUT= 5s 1 to 99 seconds PRL Setting Bi-directional settings for AUTO HIGH SPEED=ON ON or OFF BI-DIR=ON ON or OFF exit Exit to PRL Setting RS-232C Setting Parameters for AUTO mode BaudRate= 9600 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200 baud CodeType=8 bits 7 or 8 bits Parity =NONE NONE, EVEN, or ODD Stop Bit=1 bits 1 or 2 stop bits Xon/Xoff=ON ON or OFF DTR (ER)=ON ON or OFF Robust Xon=OFF ON or OFF exit Exit to RS-232C Setting 4-8