Brother International Innov-ís 500D Users Manual - English - Page 111
Darning
View all Brother International Innov-ís 500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
SE-BrotherE_sgml.book Page 105 Monday, June 30, 2003 3:44 PM Darning Fabric that has been torn can be darned. Darning is sewn as shown below. 1 a Reinforcement stitching 3 1 Determine the desired length of the darning. a Set the button guide plate on buttonhole foot "A" to the desired length. (The distance between the markings on the presser foot scale is 5 mm (3/16 inch).) 1 Select stitch 52 or 53 . c 2 3 4 a Presser foot scale b Length of darning c 5 mm (3/16 inch) d 7 mm (1/4 inch) • A bar tack with a maximum length of about 28 mm (1-1/8 inch) can be sewn. Attach buttonhole foot "A". b • For details, refer to "Replacing the presser foot" (page 40). • For details, refer to "Selecting stitching" (page 47). Position the fabric so that the needle is 2 mm d (1/16 inch) in front of the area to be darned, and then lower the presser foot lever. 2 1 a Tear b 2 mm (1/16 inch) Pass the upper thread down through the hole in the presser foot. • When lowering the presser foot, do not push in the front of the presser foot, otherwise the darning will not be sewn with the correct size. Reinforcement Stitching 105