Brother International Innov-is 2500D Users Manual - English - Page 125
Removing the Embroidery Unit
View all Brother International Innov-is 2500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
BEFORE EMBROIDERING e Press . ■ Removing the Embroidery Unit a Press or , and then press . → The carriage moves to the storage position. → The carriage moves to its initial position. CAUTION • Always remove the embroidery frame before pressing . Otherwise, the frame may strike the embroidery foot, and possibly cause injury. • The embroidery unit will not fit in the storage box/ case if this step is not done. Note If the carriage does not move to the storage position, the embroidery unit cannot be put into its storage box/ case. b Turn off the machine. Note CAUTION Be sure to turn off the machine before removing the embroidery unit, otherwise damage to the machine • Keep your hands and foreign objects away from the may result. embroidery carriage and frame when the machine is embroidering. Otherwise, injury may result. c Press the release button under the end of the embroidery unit, and then pull the unit away 5 Note from the machine. If the machine was not initialized correctly, the initial screen may not appear. This is not a sign of a malfunction. If this occurs, turn the machine off, then on again. Embroidery f The following message will disappear after 15 seconds or press to move to the next step. a Note • The confirmation message to lower the frame-securing lever after the carriage moves to its initial position is displayed. • Continue with pattern selection and remember to lower the frame-securing lever when the embroidery frame is attached. → Pattern selection screen appears. a Release button CAUTION • Do not carry the embroidery unit by holding the release button compartment. 123