Brother International Innov-is 40 Operation Manual - Page 54
Sewing overcasting, stitches using zigzag foot, stitches using overcasting, foot G
View all Brother International Innov-is 40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
UTILITY STITCHES Sewing overcasting stitches using zigzag foot "J" Turn on the machine. a With the pattern selection dial, b select , or . Sewing overcasting stitches using overcasting foot "G" Turn on the machine. a With the pattern selection dial, b select , or . Attach zigzag foot "J". c • For details, refer to "Replacing the presser foot" (page 31). Sew along the edge of the fabric with the d needle dropping off the edge at the right. a a Attach overcasting foot "G". c • For details, refer to "Replacing the presser foot" (page 31). Position the fabric with the edge of the fabric d against the guide of the presser foot, and then lower the presser foot lever. a a Needle drop point CAUTION ● After adjusting the stitch width, slowly turn the handwheel toward you and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. a a Presser foot guide Slowly turn the handwheel toward you and e check that the needle does not touch the presser foot. Sew with the edge of the fabric against the f presser foot guide. a a Needle drop point 52