Brother International Innov-is 6700D Operation Manual for Premium Pack III Opt
Brother International Innov-is 6700D Manual
View all Brother International Innov-is 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International Innov-is 6700D manual content summary:
- Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 1
Upgrade KITIII Operation Manual - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 2
ENGLISH CONTENTS BEFORE YOU START...2 NEW FEATURES ...2 EMBROIDERING WITH THE BORDER EMBROIDERY FRAME (30 cm × 10 cm (approx. 11-3/4 inches × 4 inches))...3 About the Border Embroidery Frame 3 Sample Projects Using the Border Embroidery Frame 3 Selecting a Pattern ...4 Hooping the Fabric in the - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 3
BEFORE YOU START It is important to perform the upgrade according to the procedure described in the Installation Guide. The machine can then be used as described in the Operation Manual. The border embroidery frame (30 cm × 10 cm (approx. 113/4 inches × 4 inches)) will show on the LCD screen of the - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 4
EMBROIDERING WITH THE BORDER EMBROIDERY FRAME (30 cm × 10 cm (approx. 11-3/4 inches × 4 inches)) About the Border Embroidery Frame Since the fabric can easily be repositioned and rehooped when the border embroidery frame is used, this frame is useful for embroidering repeated patterns while sliding - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 5
the border function to repeat the pattern. Memo • For details for the border function, refer to "Designing Repeated Patterns" in chapter 6 of the Operation Manual for the sewing machine. a b a Border embroidery frame embroidering area (30 cm × 10 cm (approx. 11-3/4 inches × 4 inches)) b Center mark - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 6
e If necessary, assign thread marks. Since the pattern will be repeatedly embroidered from the top to the bottom, add the thread mark to the lower center of the bottom pattern. When you are finished, press . Memo • Select the location where the thread mark is to be added according to the - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 7
f Press . b Affix stabilizer material to the fabric to be embroidered. Note • When embroidering the edges of the fabric, affix stabilizer material larger than the fabric, and then firmly secure the fabric and excess part of the stabilizer material within the border embroidery frame (in the same - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 8
upper frame, align the center mark (line) on the fabric with the guide line on the embroidery sheet, and then press down on the left unit carriage has moved to its initial position. c Align the guide on the border embroidery frame with the right edge of the embroidery frame holder. a - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 9
d Slide the border embroidery frame into the embroidery frame holder, making sure to align the border embroidery frame's arrow mark (U) with the embroidery frame holder's arrow mark (U). Embroidering the First Pattern Note • When the border embroidery frame is used, the embroidering time may vary - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 10
has become tangled and the embroidery unit carriage does not move to its initial position, even after the thread is cut, turn off the machine, manually gently move the carriage, and then remove the border embroidery frame. • Only move the embroidery unit carriage when the machine is turned off - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 11
c Use to select the needle position that will align with the thread mark at the end of previous embroidery. For this example, align the needle position with the upper center of the next pattern. When you are finished, press . d Use to align the needle position with the point of the thread mark - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 12
f Embroider the next pattern. To continue embroidering a repeating pattern, repeat the procedure starting with "Removing the Border Embroidery Frame". CAUTION • If the sewing machine is turned off, then turned on again with the border embroidery frame attached or if you try to select a stitch - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 13
USING THE CAMERA TO CONNECT PATTERNS Instead of using thread marks, the camera can be used to connect patterns in the Embroidery Edit screen. An area of 27 cm × 17 cm (10-1/2 inches × 6-1/2 inches) can be embroidered when the camera is used to connect patterns. Select the appropriate frame depending - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 14
regarding movement of embroidery unit. c Press the "Automatic Threading" button. d Follow the on-screen instructions to complete the procedure. 1. Raise needle bar to its highest position. Note • The "Needle it is dirty. If you have no new stickers, contact your nearest Brother dealer. 13 - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 15
. If "NG" appears, remove the sticker, and then follow the on-screen instructions to repeat steps 3 and 4 of Stepd. If multiple attempts to set the position are not successful, contact your nearest Brother dealer. Practice (Connecting Three Patterns) In order to practice aligning pattern edges - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 16
c Hoop fabric in the 20 cm × 20 cm (8 inches × 8 inches) embroidery frame, and then attach the frame to the embroidery machine. f Lower the presser foot, and then embroider the first pattern. g After embroidering of the first pattern is finished, the following message appears. Press . d Press - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 17
i Select the second pattern (2) for practicing, and then press . k When the pattern connection setting screen appears, select the reference edge and reference point of the first pattern for connecting the next pattern. Since, in this example, we will connect the center point of the bottom - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 18
Prepare two embroidery positioning stickers. We will follow the on-screen instructions to affix these two stickers to the fabric so that the product or purchase replacement stickers (SAEPS2, EPS2: XF0763-001) from your Brother dealer. If any other sticker is used, the camera may not recognize - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 19
large circles of the two positioning stickers do not fit within the embroidering area, the operation will be paused. Follow the on-screen instructions to reposition the positioning stickers. Refer to "Changing the Position of a Sticker" on page 22 to reposition the stickers. • If the sticker peels - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 20
q Select the area containing one of the two stickers, and then press . → The camera detects the two positioning stickers. Note • If either of the following messages appear, rehoop the fabric so that the next pattern and both the positioning stickers are within the embroidery sewing area as - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 21
t When the following message appears, press . v Before embroidering, press to display the pattern connection setting screen. Select the reference edge and reference point for connecting the second and third patterns, and then press . In this example, we will select the bottom point of the - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 22
reference point b Second pattern (2) c Third pattern (3) → Message appears on screen and carriage will move after pressing . x Follow the on-screen instructions to perform steps m through r. → After embroidering is finished, is no longer highlighted or located at the top right of LCD screen - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 23
not easily fit in the embroidering area, follow the on-screen instructions that appear after step o on page 18 in order to move the positioning stickers. For an example, the on-screen instruction appears when you use the embroidery frame with a size of 10 cm × 10 cm - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 24
appears in step p if the next pattern or affixed positioning stickers are close to being out of the embroidering area. Follow the instructions and then press . c Select the area containing one of the two positioning stickers, and then press . a Embroidering area a → The camera detects the - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 25
then remove the stickers. f Affix the second sticker and then press . e Affix the two positioning stickers again according to the on-screen instructions so that the next pattern or positioning marks can fit in the embroidery area. → The camera detects the second positioning sticker. → Press - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 26
While making sure that the positioning stickers do not peel off, rehoop the fabric according to the example displayed on the on-screen instruction. a a Embroidering area a Pattern to be embroidered next b Embroidery sheet h Continue the operation from step q on page 19 after pressing . 25 - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 27
CONNECTING ROTATED PATTERNS Greater design variations can be created by rotating patterns. The following procedure describes how to connect patterns that are rotated. b Press in the pattern editing screen. A: First pattern B: Second pattern a Select the pattern, and then press . → The pattern - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 28
c Rotate the pattern, and then press . f Refer to steps f through h of "Practice (Connecting Three Patterns)" to embroider the first pattern. g Select the next pattern, and then press . h Press in the pattern editing screen. i Rotate the pattern to the same angle as the first pattern, and - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 29
k Select the reference edge and reference point for connecting this pattern to the next one. Press . l Select the reference edge and reference point corresponding to those for the first pattern, and then press . a a a Reference edge and reference point of first pattern a Reference edge and - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 30
SLIDING THE POSITION OF THE PATTERN TO BE CONNECTED When using the pattern connecting function, patterns can be connected by sliding them, instead of only aligning patterns along reference edges and reference points. This can be done when you want the pattern to be equally spaced when embroidered. - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 31
Connecting Patterns to be Joined Along an Edge Greater design variations can be created by sliding the patterns being connected. The following procedure describes how to use this function to connect patterns so they are joined along an edge. Before connecting the patterns, the basting function will - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 32
d After the pattern is sewn, remove the fabric from the frame, and then measure the distance that the pattern is to be slid. e Select the reference edge and reference point for connecting this pattern to the next one, and then press . a Vertical: 32.8 mm b Horizontal: 42.8 mm ■ Trial Sewing - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 33
f When the pattern connection setting screen appears, select the reference edge and reference point corresponding to those for the first pattern. g Specify the distance that the pattern is to be slid, and then press . a a a Reference edge and reference point a Reference edge and reference - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 34
RESUME FEATURE If the machine is turned off while the pattern connecting function is being used, the machine will return to the operation indicated below when it is turned on again. The machine operation will differ depending on when it is turned off. Example: When connecting two patterns Select the - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 35
COLOR CHANGE TABLE FOR THE EMBROIDERY PATTERNS ON THE CD-ROM Memo • These files can be opened with PE-DESIGN Ver.8 or higher version on your computer. • Patterns marked with z have been rotated. Check your design placement prior to embroidering. • In this section, the sizes of embroidery patterns - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 36
No. 07 : XKIT3B07.pes 17 min 1 (406) 2 (509) 3 (206) 4 (337) 5 (406) 6 (509) 7 (206) 8 (337) 9 (406) 10 (509) 11 (206) 12 (337) 13 (406) 28.4 cm 9.4 cm z No. 09 : XKIT3B09.pes 27 min 1 (420) 6 (420) 11 (399) 16 (399) 2 (079) 7 (079) 12 (420) 17 (420) 3 (017) 8 ( - Brother International Innov-is 6700D | Operation Manual for Premium Pack III Opt - Page 37
Version 3.1 or later English 111-001
Upgrade KIT
III
Operation Manual