Brother International Innov-is NQ1400E Operation Manual - Page 76
Using the automatic thread cutting function, END COLOR TRIM, Adjusting the embroidery speed,
View all Brother International Innov-is NQ1400E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Making Embroidery Adjustments Using the automatic thread cutting function (END COLOR TRIM) The automatic thread cutting function will cut the thread at the end of sewing each color. This function is initially turned on. To turn this function off, press key and then . This function can be turned on or off during embroidering. a Press . Memo • "spm" is the number of stitches sewn in one minute. • Decrease the embroidery speed when embroidering on thin, thick, or heavy fabrics. • The sewing speed can be changed after an embroidery pattern has been started. • The maximum embroidery speed setting does not change until a new setting is selected. The setting specified before the main power is set to OFF remains selected the next time that the machine is turned on. • Decrease to a slower spm when using a special thread like a metallic thread. b Press function. to turn off the automatic thread cutting Changing the "Embroidery Frame Display" a Press to display the following screen. b In the "Embroidery Frame Display", use / to change the embroidery frame display mode. → The key will display as • When one color thread is sewn, the machine will stop without cutting the thread. c Press to return to the original screen. Adjusting the embroidery speed a Press to display the following screen. b Change the "Max Embroidery Speed" by pressing /. c Press to return to the original screen. E-28