Brother International LB6770 PRW Users Manual - English - Page 161
Error messages
View all Brother International LB6770 PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Error messages When erroneous operations are performed messages and advice on operation will be displayed on the LCD. Follow what is displayed. If you press or do the operation correctly while the error message is displayed, the message disappears. No Error Message Probable Cause 1 There is a possibility that the data for the selected pattern is corrupted. 2 Either the start/stop button or the reverse/reinforcement stitch button was pushed at a LCD screen other than the sewing LCD screen. The start/stop button was pressed without connecting the foot controller when the setting for adjusting the stitch width using the sewing speed 3 controller is set to "ON" . You have selected a pattern for which the stitch width control cannot be used. (page 58) 4 The twin needle setting is selected while a pattern that cannot be sewn with the twin needle is selected. 5 Upper thread broken. Upper thread not set up correctly. Upper thread has run out. 5 CAUTION Be sure to rethread the machine. If you press (Start/stop button) without rethreading the machine, the thread tension may be wrong or the needle may break and cause injury. 6 The machine is deleting a previously saved pattern while in embroidery edit mode. The start/stop button was pressed while the foot controller was 7 connected. You tried to use the foot controller for embroidery. Troubleshooting 159