Brother International MFC 230C Users Manual - English - Page 31
CAUTION, How to load envelopes and post cards, If you have problems when printing on, envelopes
UPC - 012502618195
View all Brother International MFC 230C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
CAUTION Do not use any of the following types of envelopes, as they will cause paper feed problems: • That are of a baggy construction. • That are embossed (have raised writing on them). • That have clasps or staples. • That are pre-printed on the inside. Glue 2 Double flap 2 Loading documents and paper b Put the envelopes or post cards into the paper tray with the address side down and the leading edge in first as shown in the illustration. Slide the paper side guides (1) and paper length guide (2) to fit the size of the envelopes or post 2 cards. 1 Occasionally you may experience paper feed problems caused by the thickness, size and flap shape of the envelopes you are using. How to load envelopes and post cards 2 a Before loading, press the corners and sides of the envelopes or post cards to make them as flat as possible. Note If the envelopes or post cards are 'double-feeding,' put one envelope or post card in the paper tray at a time. 2 If you have problems when printing on envelopes, try the following suggestions:2 a Open the envelope flap. b Make sure the open flap is either to the side of the envelope or to the back edge of the envelope when printing. c Adjust the size and margin in your application. 15