Brother International MFC 4350 Users Manual - English - Page 115
Setting Maximum Time for Incoming Messages, Setting Toll Saver, ICM Recording Monitor, SELECT
View all Brother International MFC 4350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
101 M E S S A G E C E N T E R Setting Maximum Time for Incoming Messages Your MFC comes set to receive voice messages up to 30 seconds long. You can change this setting to any length from 20 seconds to 60 seconds, in 5-second increments. This setting also applies to the Memo. 1 Press Function , 1 , 8 , 4 . The screen prompts you to select a maximum time. MESSAGE 30 SEC? SELECT & SET 2 Press or to select the maximum time setting for incoming messages. 3 Press Set when the screen displays your setting. 4 Press Stop to exit. See Setting Ring Delay p. 40 Setting Toll Saver When you set the toll saver feature, the MFC answers after four rings if you don't have messages, and after two rings if you do have messages. This way, when you call the MFC, if it rings three times, you know you have no messages, and can hang up, avoiding any toll charge. When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be off for the MFC to operate using your Ring Delay setting. 1 Press Function , 1 , 2 , 1 . 2 Press or to select TOLL SAVER (or RING DELAY). 3 Press Set when the screen displays your selection. 4 Press or to select ON. 5 Press Set . 6 Press Stop to exit. ICM Recording Monitor This feature lets you turn OFF (or ON) the speaker volume for voice messages. When you turn the monitor OFF, you will not hear messages as they come in. 1 Press Function , 1 , 8 , 5 . 2 Use or to select OFF (or ON). 3 Press Set when the screen displays your selection. 4 Press Stop to exit.