Brother International MFC 4600 Service Manual - Page 143
[ 2 ] Error codes shown in the \, Refer - error message 78
UPC - 012502565185
View all Brother International MFC 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
[ 2 ] Error codes shown in the "MACHINE ERROR X X " message Error Code X X (Hex.) ( 71 ( 72 ( 73 ( 74 ( 75 ( 76 ( 77 ( 78 ( 79 ( 80 ( 82 ( 83 ( 84 ( 88 ( A1 ( A2 ( A3 ( A4 ( A7 ( A8 ( A9 ( AC Error factor Laser scanner motor does not lock. ) Cannot detect Beam Detect signal. ) No toner cartridge loaded. ) Toner empty. ) In-house temperature error. ) Fixing heater harness disconnected or broken. ) Heater thermister short circuit.) Heater thermister harness disconnected or broken. ) Toner thermister disconnected or broken. ) Paper size setting error. ) Paper feeding error. ) Paper jam. The registration sensor remains ON.) Paper jam. The paper ejection sensor remains ON. ) Paper jam. Even after the registration sensor has gone OFF, the paper ejection sensor still stays OFF.) Top cover opened. ) Document too long to scan. ) Document not detected by the document rear sensor. ) 50% or more faulty of white level data. ) One-line feeding time-out error. ) One-line scanning time-out error. ) Abnormal scanning reference voltage. ) Less than 50% faulty of white level data. ) Error codes in parentheses do not appear in the "MACHINE ERROR X X", since those errors are displayed as messages described in "[ 1 ] Error messages on the LCD." Those error codes appear in the communications error list if an equipment error occurs during communications. Refer to Section 1.2, (13). VI - 4