Home » Brother International Manuals » Multifunction Devices » Brother International MFC-9030 » Manual Viewer

Brother International MFC-9030 Service Manual - Page 3

Preface, Disassembly/reassembly And Lubrication

UPC - 012502040019

View all Brother International MFC-9030 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

PREFACE This publication is a Service Manual covering the specifications, construction, theory of operation, and maintenance of the Brother facsimile equipment. It includes information required for field troubleshooting and repair--disassembly, reassembly, and lubrication--so that service personnel will be able to understand equipment function, to rapidly repair the equipment and order any necessary spare parts. To perform appropriate maintenance so that the facsimile equipment is always in best condition for the customer, the service personnel must adequately understand and apply this manual. This manual is made up of six chapters and appendices. CHAPTER 1 GENERAL DESCRIPTION CHAPTER 2 INSTALLATION CHAPTER 3 THEORY OF OPERATION CHAPTER 4 DISASSEMBLY/REASSEMBLY AND LUBRICATION CHAPTER 5 MAINTENANCE MODE CHAPTER 6 ERROR INDICATION AND TROUBLESHOOTING Appendix 1. EEPROM Customizing Codes Appendix 2. Firmware Switches (WSW) Appendix 3. Circuit Diagrams This manual describes the models and their versions to be destined for major countries. The specifications and functions are subject to change depending upon each destination.

Section	Page
CHAPTER 1 GENERAL DESCRIPTION	6
1.1 EQUIPMENT OUTLINE	7
1.1.1 External Appearance and Weight	7
1.1.2 Components	7
1.2 SPECIFICATIONS	8
CHAPTER 2 INSTALLATION	17
2.1 INSTALLING THE UPDATE DATA TO THE FACSIMILE MACHINE	18
2.2 SETTING ID CODES TO FACSIMILE MACHINES	20
CHAPTER 3 THEORY OF OPERATION	22
3.1 OVERVIEW	23
3.2 MECHANISMS	24
3.2.1 Scanner Mechanism	25
3.2.1.1 Document feeding and ejecting mechanism	25
3.2.1.2 Scanner	25
3.2.2 Laser Printing Mechanism	26
3.2.2.1 Paper pulling-in, registration, feeding, and ejecting mechanism	26
3.2.2.2 Print process mechanism	28
3.2.2.3 Heat-fixing mechanism	29
3.2.3 Sensors and Actuators	30
3.3 CONTROL ELECTRONICS	32
3.3.1 Configuration	32
CHAPTER 4 DISASSEMBLY/REASSEMBLY AND LUBRICATION	34
4.1 DISASSEMBLY/REASSEMBLY	36
Safety Precautions	36
Tightening Torque List	37
Preparation	38
How to Access the Object Component	38
4.1.1 Document Guide Base	40
4.1.2 Board Access Cover	40
4.1.3 Auto Sheet Feeder (ASF)	41
4.1.4 Handset Mount and Control Panel ASSY	47
4.1.5 Panel Rear Cover and Control Panel	49
4.1.6 Top Cover	52
4.1.7 CIS Unit	54
4.1.8 Hook Switch PCB	55
4.1.9 Document Feed Roller ASSY, Scanner Drive Unit, and Document Ejection Roller ASSY	56
4.1.10 Separation Roller and its Gear	58
4.1.11 Heat-fixing Unit, FU Lamp, and Paper Ejection Sensor Actuator	60
4.1.12 Laser Unit and Toner Sensor PCB	62
4.1.13 Main PCB	63
4.1.14 Bottom Plate	65
4.1.15 Low-voltage Power Supply PCB	66
4.1.16 High-voltage Power Supply PCB	69
4.1.17 Cover/Registration Sensor PCB, Duct, and Fan	70
4.1.18 Top Cover Sensor Actuator	71
4.1.19 Power Supply Shield	71
4.1.20 Speaker	72
4.1.21 Gear Drive Unit	73
4.1.22 PCB Support and NCU PCB	75
4.1.23 Side Covers R and L	76
4.1.24 Scanner Grounding Plate	77
4.1.25 EL (Eraser Lamp) Board	78
4.1.26 Harness Routing	79
4.1.27 Cleaning of High-voltage Contacts and Grounding Contacts	84
4.2 LUBRICATION	85
CHAPTER 5 MAINTENANCE MODE	89
5.1 ENTRY INTO THE MAINTENANCE MODE	90
5.2 LIST OF MAINTENANCE-MODE FUNCTIONS	91
5.3 DETAILED DESCRIPTION OFMAINTENANCE-MODE FUNCTIONS	93
5.3.1 EEPROM Parameter Initialization	93
5.3.2 Printout of Scanning Compensation Data	94
5.3.3 ADF Performance Test	96
5.3.4 Test Pattern 1	97
5.3.5 Firmware Switch Setting and Printout	98
5.3.6 Operational Check of LCD	101
5.3.7 Operational Check of Control Panel PCB	101
5.3.8 Receiver Volume Adjustment (applicable to the American version only)	103
5.3.9 Sensor Operational Check	104
5.3.10 Fine Adjustment of Scanning Start/End Position	105
5.3.11 CIS Scanner Area Setting	106
5.3.12 EEPROM Customizing	106
5.3.13 Printout of the Equipment's Log Information	107
5.3.14 Equipment Error Code Indication	108
5.3.15 Output of Transmission Log to the Telephone Line	108
5.3.16 Cancellation of the Memory Security Mode (applicable to the European version only)	109
CHAPTER 6 ERROR INDICATION AND TROUBLESHOOTING	111
6.1 ERROR INDICATION	112
6.1.1 Equipment Errors	112
[ 1 ] Error messages on the LCD	112
[ 2 ] Error codes shown in the \	116
6.1.2 Communications Errors	118
6.2 TROUBLESHOOTING	128
6.2.1 Introduction	128
6.2.2 Precautions	128
6.2.3 Checking prior to Troubleshooting	128
6.2.4 Troubleshooting Procedures	130
[ 1 ] Control panel related	130
[ 2 ] Telephone related	130
[ 3 ] Communications related	131
[ 4 ] Paper/document feeding related	131
[ 5 ] Print-image related	132
Location of High-voltage Contacts and Grounding Contacts	139
Appendix 1. EEPROM Customizing Codes	140
Appendix 2. Firmware Switches (WSW)	143

Match case Limit results 1 per page

PREFACE

This publication is a Service Manual covering the specifications, construction, theory of operation,

and maintenance of the Brother facsimile equipment. It includes information required for field

troubleshooting and repair--disassembly, reassembly, and lubrication--so that service personnel

will be able to understand equipment function, to rapidly repair the equipment and order any

necessary spare parts.

To perform appropriate maintenance so that the facsimile equipment is always in best condition

for the customer, the service personnel must adequately understand and apply this manual.

This manual is made up of six chapters and appendices.

CHAPTER 1

GENERAL DESCRIPTION

CHAPTER 2

INSTALLATION

CHAPTER 3

THEORY OF OPERATION

CHAPTER 4

DISASSEMBLY/REASSEMBLY AND LUBRICATION

CHAPTER 5

MAINTENANCE MODE

CHAPTER 6

ERROR INDICATION AND TROUBLESHOOTING

Appendix 1.

EEPROM Customizing Codes

Appendix 2.

Firmware Switches (WSW)

Appendix 3.

Circuit Diagrams

This manual describes the models and their versions to be destined for major countries. The specifications

and functions are subject to change depending upon each destination.