Brother International MFC-J4410DW Quick Setup Guide - English - Page 17
For USB interface users, Before you install, Connect the USB cable - windows 10
View all Brother International MFC-J4410DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Windows® Macintosh USB USB Macintosh For USB interface users (Mac OS X v10.5.8, 10.6.x, 10.7.x) 17 Before you install Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. b Connect the USB cable to the USB port marked with a symbol a. You will find the USB port inside the machine on the right, as shown in the callout below. 1 NOTE For Mac OS X v10.5.0 to 10.5.7 users, upgrade to Mac OS X v10.5.8 - 10.7.x. 18 Connect the USB cable IMPORTANT • DO NOT connect the machine to a USB port on a keyboard or a non-powered USB hub. • Connect the machine directly to your Macintosh. a Lift the scanner cover until it locks securely into the open position. c Carefully guide the USB cable into the cable channel and out the back of the machine. Connect the cable to your Macintosh. IMPORTANT Make sure that the cable does not restrict the cover from closing, or an error may occur. 17