Brother International MFC9440CN Quick Setup Guide - English - Page 24

Macintosh® USB STEP 2 Installing the Driver & Software Macintosh® For USB Interface Cable Users 3 For Mac OS® X 10.2.4 or greater Important Make sure that you have finished the instructions from step 1 Setting Up the Machine on pages 4 through 11. Note For Mac OS® X 10.2.0 to 10.2.3 users, upgrade to Mac OS® X 10.2.4 or greater. (For the latest information for Mac OS® X, visit http://solutions.brother.com) 1 Connect the USB interface cable to your computer, and then connect it to the machine. 4 Double-click the Start Here OSX icon to install. Follow the on-screen instructions. Please wait, it will take a few seconds for the software to install. After the installation, click Restart to finish installing the software. Note Please see the Software User's Guide on the CD-ROM to install the PS driver. 5 The Brother software will search for the Brother device. During this time the following screen will appear. Improper Setup DO NOT connect the machine to a USB port on a keyboard or a non-powered USB hub. Brother recommends that you connect the machine directly to your computer. Note Make sure that the machine is turned on by connecting the power cord. 2 Turn on your Macintosh®. 3 Put the supplied CD-ROM into your CD-ROM drive. 6 When this screen appears, click OK. For Mac OS® X 10.3.x or greater users: The MFL-Pro Suite, Brother printer driver, scanner driver and Brother ControlCenter2 have been installed and the installation is now complete. Go to step 11. 22