Brother International PC-2800 Users Manual - English - Page 48
Odd shaped buttons/Buttons that do not fit into the button holder plate, move any slack
View all Brother International PC-2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
CONTENTS BEFORE USE SEWING 3. Once sewing is completed, gently pull the gimp thread to remove any slack, and trim off any excess. * After using the seam ripper to cut open the threads over the buttonhole, trim off the threads. Odd shaped buttons/Buttons that do not fit into the button holder plate 2 1 3 4 Use the markings on the presser foot scale to set the size of the buttonhole. One mark on the presser foot scale equals 5 mm (3/ 16''). Add together the button diameter and its thickness, and then set the plate at the calculated value 1 Presser foot scale 2 Button holder plate 3 Completed measurement of diameter + thickness 4 5 mm (3/16'') Example: For a button with a diameter of 15 mm (9/16''), a thickness of 10 mm (3/8''), the scale should be set at 25 mm (1''). 1 1 10 mm (3/8'') 2 15 mm (9/16'') 2 UTILITY STITCHES MAINTENANCE SEWING CHART PATTERNS (PROGRAMMED IN MACHINE) 45