Brother International PC-6500 Users Manual - English - Page 30
Extra spool pin, Pulling up the bobbin thread
View all Brother International PC-6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
CONTENTS SETTING UP Pulling up the bobbin thread At some times, for example when making gathers, you may want to pull up the bobbin thread. 1. Raise the presser foot lever. 2. Remove the bobbin cover, and insert the bobbin into the 1 shuttle so that the thread unrolls as shown in the illustration. 3. Guide the thread through the groove, and then leave it there without cutting it. 1 Bobbin 5 4. With the bobbin cover still removed, hold the upper thread, press the needle position button twice, and then pull up the bobbin thread. 5. Pull about 2" (5.0 cm) of the bobbin thread out toward the rear of the machine and reattach the bobbin cover. SEWING UTILITY STITCHES MY CUSTOM STITCHTM (CREATE YOUR OWN STITCH DESIGNS) EMBROIDERING MAINTENANCE ERROR MESSAGES Extra spool pin When embroidering with metallic thread, use the extra spool pin in order to prevent the thread from twisting as it unrolls from the spool. 3 Note 2 When using metallic thread, we recommend using a 90/14 home sewing machine needle. 1 1. Insert the extra spool pin onto the end of the bobbin winder shaft. 2. Place the spool felt on the spool pin. 3. Place the spool of thread on the spool pin so that the thread unrolls from the front of the spool. 4. Thread the upper thread. 1 Insert the extra spool pin onto the end of the bobbin winder shaft. 2 Spool felt 3 Spool of thread Net When using special threads that quickly wind off the spool, place a net over the spool before sewing. Be sure to cut the net to match the size of the spool. 1 Net 2 Spool 3 Spool pin 1 4 4 Spool cap 2 3 4 27 SEWING CHART PATTERNS (PROGRAMMED IN MACHINE)