Brother International PT 1800 Users Manual - English and Spanish - Page 13
PRINT HEAD & ROLLERS, To clean the print head and rollers - label tape
UPC - 012502525882
View all Brother International PT 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
PRINT HEAD & ROLLERS Occasionally, specks of dust or dirt become attached to the machine's print head and rollers. This is particularly likely when you are using the unit outdoors or in a very dusty environment. If a section of the print head is covered with dust, a blank horizontal streak may appear through the label text. Therefore, as with a tape recorder, the machine's head may need to be cleaned from time to time. To clean the print head and rollers: 1 Turn off the machine. 2 Open the tape compartment cover, then remove the tape cassette if one is installed. The print head and rollers are located in the tape compartment. 3 Print head: Use a dry cotton swab to gently wipe the print head with an up-and- down motion. Rollers: Use a dry cotton swab to wipe each roller with an up-and-down motion while rotating them with your finger. 4 Install a tape cassette, close the tape compartment cover, and then try printing again. 5 If dust still remains, repeat steps 3 and 4 using a cotton swab dipped in isopropyl (rubbing) alcohol. If none of the above works, contact your service representative. Print head Print head Rollers Cotton swab 9