Brother International PT1500PC Users Manual - English - Page 22
Troubleshooting, Monitoring the P-touch Status - p touch
UPC - 012502600459
View all Brother International PT1500PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4 Use a dry cotton swab to gently wipe up and down along the print head and roller. Caution: Be careful not to touch the cutter near the print head and roller while cleaning them. In addition, do not try to clean the print head immediately after printing, otherwise you may be burned. 5 Insert the tape cassette, and then close the tape compartment cover. * Cleaning can easily be done using the optional print head cleaning cassette (TZ-CL4). Roller (area to be cleaned) Print head (area to be cleaned) Cotton swab Cotton swab Troubleshooting Monitoring the P-touch Status You can determine the status of the PT-1500PC from the status indicator. Status Indicator Cause→Remedy Lights up • The P-touch is operating normally and is in stand-by. Flashes a few times • The P-touch is receiving data from the computer correctly. Flashes quickly Flashes, staying off longer that it is on Flashes slowly • The cassette is not installed. → Install a cassette. • A transmission error occurred. → Press the power/feed key to turn the PT-1500PC off, then on again. • The tape cutter button was pressed while printing → Try printing again. • An EEPROM error occurred. → Contact your service representative. • The print head is cooling down. → Wait until printing continues. 20