Brother International Quattro 2 6700D Users Manual - English - Page 12

Bobbin Work Free-Motion Sewing Note • For bobbin work free motion sewing use the instructions for "CREATING BOBBIN WORK" beginning on page 8. • Use the quilting foot provided with your machine. If you do not have a quilting foot, contact your nearest authorized dealer to purchase. For details on using the quilting foot, refer to the Operation Manual provided with your machine or with the presser foot. d Once the design is transferred to the stabilizer, position the fabric under the free-motion presser foot on the machine, and then use freemotion sewing to sew the design. If so desired, use a template or draw your design on the stabilizer to allow for ease of stitching. Remember, your stitches with your decorative thread will be on the underneath side of your fabric and the stabilizer will be on the top of the wrong side of your fabric. The CD-ROM included with this kit contains template data for free-motion sewing. For a list of the template designs, refer to "Templates for Free-Motion Sewing" on page 12. a Print the desired template. Note • Print the template in its original dimensions. If an enlarged template is used, the bobbin thread may run out during sewing. b c Affix the stabilizer to the wrong side of the fabric. Place commercially available transfer paper on the stabilizer, then the paper printed with the template on top, and then trace the design with a pencil. a Template b Transfer paper c Stabilizer on wrong side of fabric Note • Some templates have the arrows to show you the sewing direction. Trace the arrows with design. 11