Brother International T-8420B Instruction Manual - English - Page 10
Installation
View all Brother International T-8420B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4. INSTALLATION 4. INSTALLATION CAUTION Machine installation should only be carried out by a qualified technician. Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine weighs approximately 43 kg. The installation should be carried out by two or more people. Do not connect the power cord until installation is complete. The machine may operate if the treadle is depressed by mistake, which could result in injury. Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand is used, the weight of the machine head may cause your hand to slip, and your hand may get caught. Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a serious electric shock, and problems with correct operation may also occur. Carrying the machine y The machine should be carried by the arm by two people as shown in the illustration. * Make sure that the machine pulley does not turn. Tilting back the machine head y Hold section (B) with your foot so that the table does not move, and then push the arm with both hands to tilt back the machine head. 2959M Returning the machine head to the upright position 1. Clear away any tools, etc. which may be near the table holes. 2. While holding the face plate with your left hand, gently return the machine head to the upright position with your right hand. 2871M 2872M T-8420B, 8450B, 8720B, 8750B 4