Brother International T-8752C Basic Instruction Manual - English - Page 37

6. SEWING 6. SEWING CAUTION Attach all safety devices before using the sewing machine. If the machine is used without these devices attached, injury may result. Turn off the power switch at the following times. The machine may operate if the treadle is depressed by mistake, which could result in injury. y When threading the needle y When replacing the bobbin and needle y When not using the machine and when leaving the machine unattended Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. Secure the table so that it will not move when tilting back the machine head. If the table moves, it may crush your feet or cause other injuries. Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand is used, the weight of the machine head may cause your hand to slip, and your hand may get caught. 6-1. Sewing 2471B 1. While holding the two upper threads with your fingers, turn the machine pulley by hand toward you until the lower threads come out onto the feed dog. 2. Pull the lower threads toward you and check that they pull out smoothly. Lower thread Lower thread 2472B 2114M 3. Press the ON power switch (1). The power indicator (2) will illuminate. 4. Use the operating panel to carry out the programming which is necessary for sewing. (Refer to the chapter on "5. Using the operating panel".) 5. Depress the treadle to start sewing. 2182B T-8421C, 8422C, 8452C, 8722C, 8752C 29