Brother International VX3250F Operation Manual - Page 39
Darning
View all Brother International VX3250F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Darning Stitch Name Stitch Pattern Length [mm (inch)] Straight Stitch 6 (Center Needle Position) 1.6 (1/16) Other Darning Plate Straight Stitch 7 (Center Needle Position) 1.8 (1/8) Darning Plate Begin sewing by alternating between 5 gently drawing the work away from you and pulling it toward you. Note ● Sew while holding the fabric stretched in order to keep the fabric held down. Repeat this motion until the section being 6 darned is filled with parallel lines of stitching. Straight Stitch 8 (Center Needle Position) 2 (1/16) Darning Plate Straight Stitch 9 (Center Needle Position) 3 (1/8) Darning Plate Straight Stitch 10 (Center Needle Position) 4 (3/16) Darning Plate Straight Stitch (Left Needle Position) 11 2.5 (3/32) Darning Plate Turn off the machine. 1 Place the darning plate on the needle 5 plate, then turn on the machine. Either remove both the presser foot and 2 presser foot holder assembly and then lower the presser foot lever. Put the section you want to darn under 3 the presser foot together with fabric for reinforcement. Turn on the machine. 4 CAUTION ● Do not turn on the machine while pressing down the foot controller. The machine may start unexpectedly and cause personal injury or damage to the machine. 38