Brother International VX3250F Quick Reference Guide - Page 1
Brother International VX3250F Manual
View all Brother International VX3250F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick Reference Guide Guía de referencia rápida 1Lower Threading Enhebrado del hilo inferior • Pull up the spool pin completely • Tire del portacarrete completamente Be sure to use the correct bobbin. Asegúrese de que utiliza la bobina correcta. Actual 11.5mm Size 7/16" Tamaño real Please read "IMPORTANT SAFETY INSTRUCTIONS" and the detailed instructions in the Operation Manual. Lea "INSTRUCCIONES DE SEGURIDAD IMPORTANTES" y las instrucciones detalladas que aparecen en el Manual de instrucciones. • Pull the thread completely • Tire del hilo completamente Click! • Align the notch to the projection • Alinee la muesca con el saliente • Slide the bobbin winder shaft to the right • Deslice el eje de la devanadora hacia la derecha • Cut the thread with the cutter • Corte el hilo con el cortador • Hold the end of the thread • Sujete el extremo del hilo • 7 - 10 cm (3-4 inches) • 7 - 10 cm (3-4 pulg.) • Push the bobbin down • Empuje la bobina abajo • Leave 1 cm (1/2 inch) of thread from the hole on the bobbin • Deje 1 cm (1/2 pulg.) de hilo desde el orificio de la bobina • Wind the thread few times around the bobbin • Enrolle el hilo unas cuantas veces alrededor de la bobina • When the bobbin is full, the bobbin will spin slowly • Cuando esté llena, la bobina girará lentamente • Put the projection into the groove • Coloque la proyección en la ranura See other side for "2. Upper Threading". Consulte en la otra cara "2. Enhebrado del hilo superior". XF5978-101ᶃ