Brother International XS2070 Operation Manual - Page 98
List of symptoms
View all Brother International XS2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
APPENDIX List of symptoms ■ Before sewing Symptom Possible cause How to put it right The needle threader can not be used. (For models equipped with the needle threader lever.) You have not moved the needle holder to its highest position. The needle is incorrectly installed. Raise the needle either by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up or by pressing (needle position button) once or twice. Correctly install the needle. The sewing light does not come on. The machine is not turned on. Turn on the machine. The thread is not passed through the bobbin-winding thread guide correctly. Correctly pass the thread through the bobbin-winding thread guide. Bobbin thread Bobbin spins slowly. (for models Move the sewing speed controller to does not wind equipped with the sewing speed the right (so that the speed will be neatly on the bob- controller.) fast). bin. The thread that was pulled out was not wound onto the bobbin correctly. (For models equipped with the fast bobbin winding system.) Wind the thread that was pulled off round the bobbin five or six times clockwise. The thread does not pass through the eye of the needle. (For models You have not moved the needle holder to its highest position. equipped with the needle threader lever.) The needle is incorrectly installed. Raise the needle either by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up or by pressing (needle position button) once or twice. Correctly install the needle. The needle threader lever does not lower to the correct position. (For models equipped with the needle threader lever.) The needle has not been raised to the correct position. Press the needle position button. While winding the bobbin, the bobbin thread was You have not wound the bobbin wound below the thread properly. bobbin winder seat. After removing the thread wound below the bobbin winder seat, wind the bobbin correctly. Reference page 25 page 32 page 14 page 19 page 21 page 20 page 25 page 32 page 25 page 17 96