Brother International XS2080 Operation Manual - Page 10
Names Of Machine Parts And Their Functions
View all Brother International XS2080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
KNOWING YOUR SEWING MACHINE NAMES OF MACHINE PARTS AND THEIR FUNCTIONS The illustrations in this operation manual may differ from the actual machine. The main parts a Bobbin winder (page 17) This winds the thread onto the bobbin for use as the lower thread. b Upper tension-control dial (page 43) This controls the tension of the upper thread. c Bobbin-winding thread guide and pre-tension disc (page 19) Pass the thread under this thread guide and around the pre-tension disc when winding the bobbin thread. d Thread take-up lever (page 27) e Thread cutter (page 42) Pass the threads through the thread cutter to cut them. f Flat bed attachment with accessory compartment (page 7 and 46) g Operation buttons (page 9) The operation buttons differ depending on the sewing machine model. h Operation panel (page 10) This is used to select the stitch and specify the various settings. Design and position of the operation panel differs depending on the sewing machine model. i Spool pin (page 10, 17 and 25) This holds the spool of thread. j Handwheel This is used to manually raise and lower the needle. k Air vent This vent allows the air surrounding the motor to circulate. Do not cover the air vent while the sewing machine is being used. l Main power and sewing light switch (page 14) You can turn the main power and sewing light switch on and off. m Jack/socket connector (page 14) Insert the plug on the power supply cord into the jack/ socket connector. n Foot controller (page 14) You can use this to control the sewing speed, and to start and stop sewing. o Foot controller jack/socket (page 14) Plug in the foot controller plug. p Feed dog position lever (page 57 and 67) Use the feed dog position lever to lower the feed dogs. q Presser foot lever (page 25) This is used to raise and lower the presser foot. r Thread guide (page 18 and 27) This is used when winding the thread onto the bobbin and then threading the machine. s Thread guide cover (page 18 and 27) Pass the thread under this thread guide when winding the bobbin thread and threading the machine. t Handle Carry the sewing machine by its handle when transporting the machine. 8