Brother International ZE-856A Hand Book - English - Page 1
Brother International ZE-856A Manual
View all Brother International ZE-856A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
ZE-855A ZE-856A Electronic single needle zigzag lock stitcher Electronic single needle zigzag lock stitcher with thread trimmer Thread trimmer Upper thread feeding device Back tack/condense device *1 Thread wiper Automatic presser foot lifter 855A 0 A - - - - - - - - - 856A 3 4 9 Solenoid Solenoid Solenoid - Solenoid - - Solenoid General (foundation) 855A General (long stitch)*2 General (foundation) 856A General (long stitch)*2 -□01 -□03 -□01 -□03 Use For light-weight materials-medium-weight materials Maximum stitch length 2.5 mm 5 mm 2.5 mm 5 mm Max. sewing speed 5,000 rpm*3 Sewing pattern 14 patterns of 8 types built-in (Up to 99 different types of custom-made patterns can be added *4) Max. zigzag width 10 mm(Factory default 8 mm) Thread take-up lever Rotary thread take-up Needle bar stroke 33.3 mm Feed dog height 1 mm Presser foot height Presser bar lifter Knee lifter Automatic 6 mm 10 mm 7 mm Presser foot pressure 20-60N *5 20-60N 20-60N *5 20-60N Needle Schmets SY 1965 Nm 70/10 Motor Three-phase 400 W induction motor Power supply Single-phase 110V, 220V, 230V 3-phase 220V, 240V, 380V, 400V Maximum electric power consumption:600 VA *1......Used for sewing condensed stitches and back tack stitches. *2......If fine adjustments to the stitch length are needed, use" General(foundation)". *3......At the time of shipment from the factory, the maximum sewing speed is set to 4,500 rpm. If you would like to sew at speeds higher than this, change the setting of the DIP switch inside the control box. Furthermore, the maximum sewing speed may be limited by the type of sewing pattern and the zigzag width. *4......The maximum number of custom-made patterns that can be stored is 99 patterns with a total of 10,000 stitches, at 500 stitches or less per pattern. *5......If you would like to reduce the pressure of the presser foot (such as when sewing light-weight materials), replace the compression spring with the accessory spring. 2002.7 ZE-855A,856A 1/16