Canon 0080B002 User Manual - Page 34
Scanning Documents, Using CapturePerfect 3.0 - printer drivers
View all Canon 0080B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4. Scanning Documents There are two methods of scanning documents using the DR-2580C document scanner. You can scan from an application, such as CapturePerfect 3.0, or you can use the Job function, which allows you to scan by pressing the scan buttons on the operation panel, without starting up an application. This section describes the scanning flow of the CapturePerfect 3.0 application and the Job Function. For details on how to install each application and the driver, see the Easy Start Guide. Using CapturePerfect 3.0 CapturePerfect 3.0 is an ISIS-compatible application developed for Canon document scanners. CapturePerfect 3.0 includes the following modes. Select the desired scan mode from the scan menu to perform scanning. • Scan Batch to File Documents are scanned with the preset scanning conditions, and the image file is saved to the specified folder. • Scan Batch to Print Documents are scanned with the preset scanning conditions, and the scanned image is printed on the specified printer. • Scan Batch to Mail Documents are scanned with the preset scanning conditions, the e-mail software is started up, and the scanned image is attached to a new e-mail message. • Scan 1 Page Only one page of the document is scanned. • Scan Job The scanning conditions and scan mode (Scan Batch to File, Scan Batch to Print, or Scan Batch to Mail) are registered in advance as a job. The scan job can then be performed by selecting the registered job from the drop-down list (a) and pressing (Scan JOB) on the toolbar (b). ba 30 Using the Scanner