Canon 15 x 50 IS All Weather Instruction Manual - Page 8

6 Adjust the focus. Look through the eyepiece and turn the focusing knob until the object looks sharp. Using the Image Stabilizer While you look through the binoculars, the image may be shaking and difficult to see since your hands are holding the binoculars. In such a case, the Image Stabilizer can help steady the image. There are two ways to use the Image Stabilizer. You can turn on the Image Stabilizer as long as you hold down the Image Stabilizer button and or you can turn on the Image Stabilizer for 5 minutes. ■ Holding down the button The Image Stabilizer operates continuously while you hold down the button. When you let go of the button, the Image Stabilizer stops operating. ■ Five-minute operation Just press the button once and let go, and the Image Stabilizer will operate continuously for five minutes. To stop the Image Stabilizer operation, press the button again. • The lamp lights while the Image Stabilizer is on. • The Image Stabilizer may not be able to compensate for severe shaking. • When the battery power is low, the Image Stabilizer may generate noise and vibration. The image stabilization is not affected by this. • Even without batteries loaded, the binoculars can still be used as is. ENG-7