Canon 2300N Copying Guide for imageCLASS 2300 - Page 69
width 3 mm to 20 mm, press [OK].
UPC - 750845812596
View all Canon 2300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
The machine automatically selects the copy paper size according to the original size you set. is displayed; however, you can also select the paper size manually. F3 6 Press [F3] (-) or [F4] (+) to set the desired hole punch erase F4 width (3 mm to 20 mm) © press [OK]. OK You can also use the numeric keys to enter the hole punch erase width, and C (Clear) to clear the value. If you enter a value outside the setting range, an error tone sounds. Enter a value within the setting range. 3 Special Copying Features The selected mode is set, and the Copy Basic Features screen returns. NOTE The default setting is '18 mm'. @. ABC DEF 123 GHI JKL MNO 456 PRS TUV WXY 789 OPER 0 SYMBOLS 7 Enter the desired copy quantity (1 to 99) using the numeric keys. For details about entering the copy quantity, see "Specifying the Required Number of Copies," on p. 2-2. Start 8 Press [Start]. Copying starts. NOTE If you want to cancel this mode, press (Stop) © the cancel job display appears © press F3 (YES) or F4 (NO). If you press (Stop) after copying has started, some blank sheets of paper may print out. To cancel all settings and restore the machine's standard settings, press (Reset). 3-16 Frame Erase