Canon 2300N Basic Guide for imageCLASS 2300 - Page 63
When scanning is complete, remove your original., If you have set Department ID Management
UPC - 750845812596
View all Canon 2300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
G If you want to cancel a copy job in the standby mode: Stop ❑ Press [Stop]. The display for selecting a copy job to cancel appears. F2 F3 F4 4 Interrupt ❑ Press [F2] (M) or [F3] (L) to select the copy job you want to cancel © press [F4] (CANCEL). The selected job is canceled. NOTE After pressing (Stop), several copies may continue to print out. You can also cancel a copy job from the System Monitor screen. (See Chapter 1, "Introduction to Copying," in the Copying Guide.) G If you want to interrupt a copy job: ❑ To interrupt a copy job when you need to make priority copies, press [Interrupt]. For instructions on interrupting a copy job, see Chapter 1, "Introduction to Copying," in the Copying Guide. The message appears on the LCD display. Copying - Basic Operations Start ID G If you want to reserve a copy job and scan an original while the machine is printing: ❑ Place your original © press [Start]. For instructions on reserving a copy job, see Chapter 1, "Introduction to Copying," in the Copying Guide. 8 When scanning is complete, remove your original. 9 If you have set Department ID Management, press [ID]. For instructions on using Department ID Management, see Chapter 5, "System Manager Settings," in the Reference Guide. 4-8 Copy Operations