Canon 3297B002 Quick Start Guide - Page 13

Scanning Film Scanning Film This scanner can scan 35 mm film strip one frame at a time. Follow the procedure below when scanning film. • Do not connect other than the accompanying Film Adapter Unit to the FAU connector. Use of other units may lead to malfunctions of the connected unit and the scanner. • Do not touch the metallic parts of the FAU connector. • Clean the document glass before placing the Film Guide on it, otherwise dirt and dust can affect image quality or damage the film. 1 Attach the cable for the Film Adapter Unit to the FAU connector on the scanner's side panel. Insert the cable plug of the Film Adapter Unit all the way into the FAU connector. 2 Open the document cover and place the Film Guide on the document glass of the scanner. Align the Film Guide's tab with the FAU symbol on the document glass of the scanner. 3 Remove the cap from the Film Adapter Unit and gently set the Film Adapter Unit over the first frame in the Film Guide. Align the tab on the Film Adapter Unit with the Film Guide. You need to calibrate the scanner before scanning film for the first time. Do not place a film strip in the Film Guide at this point as it is not required for calibration. 11