Canon 3801B002 User Manual - Page 28
Use the SCSI cable to connect the scanner to the computer.
View all Canon 3801B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Chapter 2 Setup 1 Shut down Windows and turn the computer OFF. 2 Verify that the power switch of the scanner is OFF. If the power switch is in the ON position, push the switch to set it to OFF. Power switch OFF position ON position 3 Plug the supplied power cord into the power connector on the rear of the unit. a 120 V Type 220-240 V Type 4 Connect the power cord into an AC outlet. b 5 Use the SCSI cable to connect the scanner to the computer. 2-13
Chapter 2
Setup
2-13
1
Shut down Windows and turn the computer OFF.
2
Verify that the power switch of the scanner is OFF.
If the power switch is in the ON position, push the switch to set it to OFF.
3
Plug the supplied power cord into the power connector on the rear of the unit.
a
4
Connect the power cord into an AC outlet.
b
5
Use the SCSI cable to connect the scanner to the computer.
Power switch
OFF position
ON position
120 V
Type
220-240 V Type