Canon A1100 PowerShot A1100 IS Camera User Guide - Page 111

Changing Shooting Functions Displaying the Overlay You can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for L size or postcard size prints. ● Select [Disp. Overlay], then press the qr buttons to select an option. Grid Lines 3:2 Guide Both A grid overlays the display. Gray areas appear at the top and bottom of the screen. These areas will not print when printing on 3:2 aspect ratio paper. Both grid lines, and the 3:2 guide will display. • In mode, you cannot set [3:2 Guide] or [Both]. • Grid Lines will not be recorded on the image. • The gray areas displayed with [3:2 Guide] are the areas that will not be printed. The actual image recorded will include the portion in the gray areas. Changing the IS-Mode Settings ● Select [IS Mode], then press the qr buttons to select an option. Continuous Shoot Only Panning Image stabilization is always on. You can confirm the result directly on the display, which makes it easier to check the composition or focus. Image stabilization is only active at the moment of shooting. Image stabilization only counters up and down motion. This option is recommended for shooting objects moving horizontally. • If camera shake is too strong, attach the camera to a tripod. It is recommended to set the IS Mode to [Off] when the camera is fixed to a tripod. • When using [Panning], hold the camera horizontally. Image stabilization does not work when the camera is held vertically. 111