Canon CONSOLE Image Control and Storage Software v1.1 CONSOLE_V1-1_ENG.pdf - Page 8
Connecting the Camcorder, Connecting the Camcorder to the Computer
View all Canon CONSOLE Image Control and Storage Software v1.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
1-8 Preparation (Installation, Connection, Launch, Activation) Connecting the Camcorder Connecting the Camcorder to the Computer 1 Turn the camcorder's power on and activate the DV CONTROL function. 2 Set the camcorder's recording program to EXT.CONT. or Camera mode. • When the camcorder is set to EXT.CONT. mode, only the following functions of the camcorder can be used. - Camcorder's start/stop button - Handle and grip zoom lever - ZOOM SPEED switch and dial - EJECT switch - All audio related adjustments except for AUDIO MONITOR button 3 Connect the camcorder to the computer using the IEEE1394 (DV) cable. • You do not need to turn off the computer. • Do not deactivate the DV CONTROL function while the camcorder is connected to the computer. • Refer to the computer manual for the location of the computer's IEEE1394 (DV) port. HDV/DV terminal on the camcorder DV cable IEEE1394 port on the computer • Follow the procedure below to confirm if the camcorder is properly connected. Your camcorder is correctly connected if you see items described in step 4 in the [Device Manager] window. 1) Set the camcorder to EXT.CONT. and connect to the computer. 2) Open the [Device Manager] window. ( 7-56) 3) Select [Devices by connection] from the [View] menu. 4) Confirm that the following names are shown under IEEE1394 controller. • When connecting to a computer in HD mode: [AV/C Tape Device], [Canon Camera Storage Device] and [Canon Virtual VCR] are shown. • When connecting to a computer in SD mode: [Canon DV camcorder], [Canon Camera Storage Device] and [Canon Virtual VCR] are shown.