Canon DC40 DC40 Instruction Manual - Page 127
Message, Explanation
UPC - 013803041606
View all Canon DC40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Message Explanation DISC ACCESS FAILURE There was an error when reading the disc or attempting to write 130 CHECK THE DISC onto it. Try cleaning the disc or replace it. This message can also appear if condensation has formed. Wait 132 E until the camcorder dries completely before resuming use. The disc may not be loaded correctly. Try removing the disc and - reinserting it. DISC COVER IS OPEN Verify the disc is correctly inserted and close the disc cover. 31 NO DISC No disc is loaded. Insert a disc. 31 You inserted a disc recorded in a different Television System (PAL - or SECAM). This message can also appear if condensation has formed. Wait 132 until the camcorder dries completely before resuming use. LOADING THE DISC The disc is being read. Wait before you start recording. - AVOID MOVING THE CAMCORDER Try not to move the camcorder while the image is being recorded. - UNABLE TO RECOVER DATA Could not recover a corrupted file. 90 This message can also appear if condensation has formed. If you 132 suspect condensation is the reason, do not initialize the disc and wait until the camcorder dries completely before resuming use. DISC FULL The disc is full (" END" flashes on the screen). Delete some 31 recordings (DVD-RW in VR mode) to free some space or replace 86 the disc. NO CARD Memory card not is inserted into the camcorder. 30 NO IMAGES No images are recorded on the memory card. - CARD ERROR A memory card error occurred. The camcorder cannot record or - display the image. The error may be temporary. If the message disappears after 4 seconds and " " flashes red, turn the camcorder off, remove the card and reinsert the card. If " " changes to green, you can continue recording/playback. CARD FULL Memory card is full. Erase some images to free some space or 92 replace the memory card. NAMING ERROR The folder and file numbers have reached their maximum value. - Set the [FILE NOS.] option to [RESET] and initialize the disc or memory card, erase all the images on the memory card or replace the disc. Trouble? UNIDENTIFIABLE IMAGE The image file is corrupted or it was saved using a compression - method other than that compatible with this camcorder (JPEG). TRANSFER ORDER You attempted to set more than 998 transfer orders. 113 ERROR TOO MANY STILL Disconnect the USB cable and decrease the number of still - IMAGES DISCONNECT images on the memory card or disc to less than 1800. Images USB CABLE cannot be erased from a DVD-R or DVD-RW disc recorded in VIDEO mode. If a dialog appeared on the computer screen, close it and then reconnect the USB cable. Direct Print Related Messages About Canon PIXMA/SELPHY DS Printers: If the printer's error indicator flashes or an error message appears on the printer's operation panel, refer to the printer's instruction manual. 127