Canon DR-6050C User Manual

Canon DR-6050C - imageFORMULA - Document Scanner Manual

Get Canon DR-6050C - imageFORMULA - Document Scanner PDF manuals and user guides
UPC - 013803109979
View all Canon DR-6050C manuals
Add to My Manuals
Save this manual to your list of manuals

Canon DR-6050C manual content summary:

  • Canon DR-6050C | User Manual - Page 1
    DR-9050C/DR-7550C User Manual DR-6050C Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference.
  • Canon DR-6050C | User Manual - Page 2
    FCC REGULATIONS (For 120 V model) Document Scanner: - DR-6050C: Model M11070 - DR-7550C: Model M11069 - DR-9050C: Model M11068 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
  • Canon DR-6050C | User Manual - Page 3
    each sales region of the Document Scanner. DR-6050C: Model M11070 DR-7550C: Model M11069 DR-9050C: Model M11068 Trademarks • Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • imageFORMULA
  • Canon DR-6050C | User Manual - Page 4
    , and troubleshooting. The Software section describes how to use the ISIS/ TWAIN driver with the scanner, and how to set up job registration tools. CapturePerfect 3.0 Operation Guide (Electronic Manual) This is the operation guide for CapturePerfect 3.0, the Canon document scanner application
  • Canon DR-6050C | User Manual - Page 5
    cleaning and roller replacement Chapter 6 Practical Examples Describes displayed messages and troubleshooting solutions Chapter 7 Appendix Provides a list of specifications and support information ■ Software Chapter 8 ISIS/TWAIN Driver Settings Describes the settings for the ISIS/TWAIN driver
  • Canon DR-6050C | User Manual - Page 6
    User Manual Hardware Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference.
  • Canon DR-6050C | User Manual - Page 7
    4-8 4. User Mode Functions 4-10 Chapter 5 Maintenance 1. Regular Maintenance 5-2 Cleaning the Scanner 5-2 Cleaning the Sensors 5-2 Cleaning the Scanning Glass and Rollers 5-3 Power Outlet 5-4 2. Replacing the Transport Rollers 5-5 Roller Replacement Cycle 5-5 Checking and Resetting the Page
  • Canon DR-6050C | User Manual - Page 8
    5-15 Cleaning the Imprinter 5-16 Imprinter Testing 5-17 Chapter 6 Practical Examples 1. Messages 6-2 Status Display 6-2 Error Messages 6-3 2. Troubleshooting 6-5 Trouble Categories 6-5 Problem and Solution 6-5 3. Uninstalling the Software 6-9 Uninstalling the ISIS/TWAIN Driver 6-9 Chapter
  • Canon DR-6050C | User Manual - Page 9
    Chapter 1 Before You Start Using the Scanner 1. Important Safety Instructions 1-2 Installation Location 1-2 Power 1-2 Moving the Scanner 1-3 Handling 1-3 Disposal 1-5 2. Features 1-6 3. Names and Functions of Parts 1-10 Front View, Feeder Inlet, and Eject Outlet ..........1-10 Rear View 1-
  • Canon DR-6050C | User Manual - Page 10
    Scanner 1. Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. Installation Location The performance of this scanner °F to 90.5 °F) Humidity: 20% to 80% RH ● Avoid installing the scanner near equipment
  • Canon DR-6050C | User Manual - Page 11
    If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information. Moving the Scanner ● The scanner weights about 50 lbs (22.5 kg). To lift or move the scanner, always use two people, one on each side. Never attempt to
  • Canon DR-6050C | User Manual - Page 12
    the scanner. ■ When cleaning the scanner, turn the power switch OFF and disconnect the power plug from the power supply. ■ Clean the scanner Then, contact your local authorized Canon dealer or service representative to have the unit serviced. ■ Do not locate the scanner in a humid or dusty location
  • Canon DR-6050C | User Manual - Page 13
    injury. Be extra careful of neckties and long hair. If anything becomes caught in the scanner, immediately disconnect the power cord to stop the scanner. ■ Be careful when placing paper in the scanner and when removing jammed paper. It is possible to cut your hand on the edge of a sheet of paper
  • Canon DR-6050C | User Manual - Page 14
    Scanner 2. Features The main features of the DR-6050C/7550C/9050C are described below. Scanner Features ● Variety of Scanning Modes The scanner is equipped with six scanning modes: Black and White, Error saving destination for image files are registered Guides The left and right document guides
  • Canon DR-6050C | User Manual - Page 15
    Background Prevents the background or original image on the reverse side of thin originals from appearing in scanned images. ● Image Rotation The scanner can rotate scanned images in 90° increments, or detect the text orientation and rotate the image in 90° increments to correct its orientation
  • Canon DR-6050C | User Manual - Page 16
    .1" (594 × 841 mm)) documents when used together with the Long Document Mode. ● MultiStream The scanner supports MultiStream, which, depending on the software application, can create two images with different scanning conditions from a single scan pass. However, this function is only available when
  • Canon DR-6050C | User Manual - Page 17
    a Paper Jam or Double Feed Error" on p. 3-23 Support (Option) By installing the optional patchcode decoder, patch code sheets inserted between document pages can be detected for batch separation. (See "Using Patchcode Sheets (Option)" on p. 3-20.) Chapter 1 Before You Start Using the Scanner
  • Canon DR-6050C | User Manual - Page 18
    Scanner 3. Names and Functions of Parts The names and functions of the DR-6050C/7550C/9050C parts are shown below. Front View, Feeder Inlet, and Eject Outlet a Upper Unit Open when cleaning the rollers or paper jams See p. 3-10.) h Document Guides Adjust to fit the width of documents, so that ejected documents
  • Canon DR-6050C | User Manual - Page 19
    View Chapter 1 Before You Start Using the Scanner a Ventilation Holes (Exhaust Fan) Exhausts heat from inside the scanner. b Power Connector Connect the supplied power cord here. (See p. 2-7.) c USB Connector (Type B) Connect the supplied USB cable here. (See p. 2-6.) d SCSI Connector (50-pin half
  • Canon DR-6050C | User Manual - Page 20
    Chapter 1 Before You Start Using the Scanner a Display Panel Displays the user mode, job info, messages, and counter. b Count Clear Key Clears the counter on the display panel. c Enter Key Selects the user mode, and accepts settings. d Keys Selects the user mode and job. e Menu Key Displays
  • Canon DR-6050C | User Manual - Page 21
    Procedures 2-2 2. Installation Requirements 2-3 3. Software Installation 2-4 About the Setup Menu 2-4 4. Connecting the Scanner to the Computer ....... 2-6 Interface Connector Locations 2-6 Connecting the Scanner to the Computer 2-6 5. Turning the Power ON (Scanner Recognition 2-9 About the
  • Canon DR-6050C | User Manual - Page 22
    you connect the scanner to the computer before installing the software, a wizard screen such as the one shown below will appear when you turn the scanner ON. In this case, click [Cancel] to close the wizard screen, and then turn the scanner OFF. • Windows 2000 • Windows XP • Windows Vista Chapter
  • Canon DR-6050C | User Manual - Page 23
    computer satisfies the recommended specifications, the scanning speed may vary, depending on the scan settings. • The ISIS/TWAIN Drivers provided with the scanner do not necessarily operate on all ISIS- or TWAIN-compatible applications. For details, contact your application software retailer. 2-3
  • Canon DR-6050C | User Manual - Page 24
    when installing software, log in using an account with Administrator privileges. • When using Windows Vista, the "User Account Control" dialog box may appear. In this case, enter your login user password for Administrator privileges, and click [OK]. Hint See the Easy Start Guide for instructions on
  • Canon DR-6050C | User Manual - Page 25
    ■ The Read Manual Screen From this screen you can select one of the supplied electronic manuals to read: the Easy Start Guide (a printed copy is also supplied), the Reference Guide, the User Manual (this manual), or the CapturePerfect 3.0 Operation Guide. Chapter 2 Setup 2-5
  • Canon DR-6050C | User Manual - Page 26
    b SCSI Connector (D-sub, 50-pin half-pitch) c DIP Switches for SCSI ID IMPORTANT • Do not connect a USB and SCSI cable to the scanner at the same time. • Use only the supplied power cord. • The scanner and computer should both be turned OFF when making connections. • Make sure that the computer is
  • Canon DR-6050C | User Manual - Page 27
    3. Use the supplied USB cable to connect the scanner to the computer. Connect the square plug (Type B) of the USB cable to the scanner. Chapter 2 Setup 3. cable. If the cable is connected while the computer is on, the scanner may not be properly recognized by the computer. 1. Shut down Windows
  • Canon DR-6050C | User Manual - Page 28
    other SCSI devices, set the DIP switches so that SCSI ID numbers are not duplicated in the system. DIP Switches Default Position (SCSI ID=2) • The scanner incorporates a SCSI terminator which is permanently set to ON. When using a daisy-chain configuration with other SCSI devices, make sure that the
  • Canon DR-6050C | User Manual - Page 29
    . 2. Turn ON the scanner. 3. Turn ON the computer. 4. Log onto Windows as an Administrator. 5. Windows automatically recognizes the scanner and performs the device driver installation. • Windows 2000 Power Switch IMPORTANT • When connecting the scanner to the computer using a SCSI cable, be sure to
  • Canon DR-6050C | User Manual - Page 30
    and click the [Device Manager] icon. • With Windows XP and Vista, a message appears when installation is finished. • Windows XP • Windows Vista • The scanner is installed in Device Manager under [Imaging devices] as [CANON DR-XXXX USB] or [CANON DR-XXXX SCSI]. (XXXX varies depending on the model
  • Canon DR-6050C | User Manual - Page 31
    Eject Trays 3-6 Preparing the Document Feed Tray 3-6 Adjusting the Document Guides 3-8 Preparing the Document Eject Tray 3-10 4. Document Feeding Methods 3-20 How to Use Patchcode Sheets 3-21 7. Clearing a Paper Jam or Double Feed Error 3-23 Paper Jam Handling 3-23 Handling a Double Feed 3-24
  • Canon DR-6050C | User Manual - Page 32
    ON and OFF, or if you are using a USB connection, you can set the USB-linked power switch. CAUTION • After turning the scanner OFF, wait at least ten seconds before turning it back ON. • If the scanner is connected via SCSI cable, always turn the scanner ON before turning the computer ON. If you
  • Canon DR-6050C | User Manual - Page 33
    Manual Feeding scanner to jam. • Always make sure that the ink on a document is dry before scanning it. Scanning documents with the ink still wet may soil the rollers or scanning glass, cause lines or smudges to appear on images, or dirty other documents. • Always clean the rollers or scanning glass
  • Canon DR-6050C | User Manual - Page 34
    manually, one after another. Document Feeder Capacity DR-6050C: Up to 300 sheets of good quality paper or up to 1.10" (28 mm) high (maximum) DR-7550C the Long Document Mode setting from the User Mode. 1. Press the Menu key on the control panel. Menu Key The User Mode is activated. 2. Press the [
  • Canon DR-6050C | User Manual - Page 35
    detection may react slowly when scanning long documents, which could result in jammed documents being damaged. Be especially careful to avoid paper jams. • To feed each document page manually when scanning long documents, press the [Separation Off] key on the control panel. The current setting is
  • Canon DR-6050C | User Manual - Page 36
    position for the documents to be loaded. The User Mode is activated. 2. Press the [ ] key five times to display Tray Position. (See p. 4-8.) 3. Confirm your settings. For the DR-6050C [0]: To load up to 300 sheets [1]: To load up to 100 sheets For the DR-7550C/9050C [0]: To load up to 500 sheets
  • Canon DR-6050C | User Manual - Page 37
    Tray moves to the selected height. Hint The positions of the left and right document guides can also be locked independently for off-center loading. For details, see "Adjusting the Document Guides" (p. 3-8). ■ Document Feeder Tray Extension / Extension Wire Pull out the tray extension as needed for
  • Canon DR-6050C | User Manual - Page 38
    to the left and right. Hint Use the extension wire if the document extends beyond the edge of the document tray. Adjusting the Document Guides The document guides normally extend at equal distances from the left and right of the center of feeding so that your documents are centered in the feed
  • Canon DR-6050C | User Manual - Page 39
    4. Lock the right document guide (a), and unlock the left document guide (b). Chapter 3 Basic Operation ■ Resetting the Document Guides To reset the guides so that they are equidistant from the center, perform the following procedure to spread the guides to the left and right as far as they will go
  • Canon DR-6050C | User Manual - Page 40
    , the Eject Tray Extension and Eject Paper Stopper, to be adjusted to fit the width and length of your documents. ■ Document Guides Slide the document eject guides to fit the width of your documents. The eject position of the document can be checked by feeding a single sheet of the document in Count
  • Canon DR-6050C | User Manual - Page 41
    for transport by the feed roller, while the pickup roller is disabled. Selecting the Document Feeding Method Continuous Feeding is the default feeding method, but Manual Feeding can be enabled by selecting Manual Feeding as the Feeding Option for the ISIS/TWAIN driver, or by pressing the Separation
  • Canon DR-6050C | User Manual - Page 42
    panel. Feed Roller Retard Roller IMPORTANT When the Continuous Manual Feeding Mode is set to ON from the User Mode, make sure to disable it (set to OFF) when finished scanning. Otherwise, normal continuous feeding will be disabled the next time someone uses the scanner. Hint For Manual Feeding, you
  • Canon DR-6050C | User Manual - Page 43
    4. Press [Enter]. Enter Key The current setting is indicated by blinking square brackets [ ]. 5. Press the [ ] or [ ] key to select [ON] or [OFF], and press [Enter] to accept the selection. 6. Press the Stop key to exit the User Mode. Chapter 3 Basic Operation 3-13
  • Canon DR-6050C | User Manual - Page 44
    3.0 software included with the scanner, or directly from the control panel of the DR-6050C/7550C/9050C, image data processing settings for each job to be used with the Job Function. Hint The Job Registration Tool is a TWAIN-compliant application that is installed along with the ISIS/TWAIN driver
  • Canon DR-6050C | User Manual - Page 45
    ISIS-compatible application developed for Canon document scanners. CapturePerfect 3.0 includes the following modes. Select the desired scan mode from the Scan menu to perform scanning. For more information on CapturePerfect 3.0, refer to the CapturePerfect 3.0 Operation Guide scanned image data is
  • Canon DR-6050C | User Manual - Page 46
    ) on the toolbar (b). 1. From the Windows task bar, click [Start] ➔ click images are displayed at full size on the screen. Hint This function is not usually practical for large scanners Guide. CapturePerfect 3.0 starts. 2. From the [Scan] menu, select [Select Scanner]. The [Select Scanner] dialog
  • Canon DR-6050C | User Manual - Page 47
    you are using) Chapter 3 Basic Operation The [Scan Batch to File Setting] dialog box opens. IMPORTANT If [CANON DR-XXXX] is not displayed in the list of scanners, you must re-install the ISIS/TWAIN driver. 4. Select the default page size and click [OK]. IMPORTANT If you select [Default] in the
  • Canon DR-6050C | User Manual - Page 48
    . Hint For more information on specifying the scan settings, see "ISIS/ TWAIN Driver Settings Dialog Box" on p. 8-4. 9. Click the [OK] button to exit the scanner settings. 10. Specify the file name and the file type for saving the image data. For details on the available settings in the [Scan Batch
  • Canon DR-6050C | User Manual - Page 49
    • If the [Automatic Feeding] Feed Option is enabled, scanning is performed automatically whenever a sensor in the Document Feed Tray detects a loaded document, and pressing the Stop key causes the Continue Scanning dialog box to appear. • If the [Panel-Feeding] Feed Option is enabled, the Start key
  • Canon DR-6050C | User Manual - Page 50
    is installed, the DR-6050C/7550C/9050C supports Automatic File Separation ISIS/TWAIN driver is installed. • Patchcode sheets must be printed in their original size. The scanner with an application that supports CapturePerfect 3.0 or the PDF file format, and print the page image only at its original
  • Canon DR-6050C | User Manual - Page 51
    LTR) and PATCH II (LTR) on LTR paper. • The scanner may not recognize the patchcodes if they are enlarged or reduced. 2. On the [Other] tab of the ISIS driver properties, select [Patchcode] from the patchcode is PATCH ll type, the patchcode sheet image is also saved and scanning continues. • If
  • Canon DR-6050C | User Manual - Page 52
    .) • When copying a patchcode pattern, the copy should be the same size as the pattern on the original. • Be careful to keep patchcode sheets clean. If a patchcode sheet has been folded or becomes creased, reprint or replace the sheet. 0.2" (5 mm) 3.9" (100 mm) Chapter 3 Basic Operation 3-22
  • Canon DR-6050C | User Manual - Page 53
    3 Basic Operation 7. Clearing a Paper Jam or Double Feed Error If a paper jam or double feed occurs during scanning, a paper jam message appears on the PC and on the scanner's display panel. Use the following procedure to clear the paper jam. CAUTION • When removing jammed paper, take care not to
  • Canon DR-6050C | User Manual - Page 54
    in the ISIS/TWAIN driver causes the following process to occur after a paper jam. (See "[Rapid Recovery System] Check Box" on p. 8-18.) • When the Rapid Recovery System is disabled, images scanned before the paper jam occurs are saved as files, scanning finishes, finished and an error message is
  • Canon DR-6050C | User Manual - Page 55
    the ISIS/TWAIN driver. (See "[Rapid Recovery System] Check Box" on p. 8-18.) • When the Rapid Recovery System is disabled, images scanned is enabled, scanning pauses when a double feed is detected, and the following error message is displayed. ■ When the Rapid Recovery System is Disabled Return the
  • Canon DR-6050C | User Manual - Page 56
    Chapter 4 Other Functions 1. Other Functions and Settings 4-2 2. Function Description 4-4 3. User Mode 4-8 User Mode Operating Procedure 4-8 4. User Mode Functions 4-10
  • Canon DR-6050C | User Manual - Page 57
    1. Other Functions and Settings The following DR-6050C/7550C/9050C functions are grouped together as Other Functions. For details, refer to the indicated pages. SCSI Speed USB Short Packet Imprinter (Optional) Imprinter Test Counter (Total Counter) Count (Roller Counter) Count-Only Mode Display
  • Canon DR-6050C | User Manual - Page 58
    follows: Panel Operation: The operation or setting is performed using the control panel keys. User Mode: The scanner function setting is made as a User Mode selection. ISIS/TWAIN: The function is an ISIS/TWAIN driver scanning setting. • The page count for the Verify Scan operation is entered using
  • Canon DR-6050C | User Manual - Page 59
    Scan The scanner compares the document page count obtained from the Count-Only mode (or entered manually) with the actual count of document pages scanned, and an error message is a number. 2. Select Verify Count in the ISIS/TWAIN driver settings. (See "[Verify Count] Check Box" on p. 8-22.) 4-4
  • Canon DR-6050C | User Manual - Page 60
    the specified count ■ Double-Feed Detection The scanner can detect double feeds. Two detection methods are used: comparison of document lengths, and ultrasonic detection of spacing between documents, which is set in the ISIS/TWAIN driver. Chapter 4 Other Functions IMPORTANT • The message that
  • Canon DR-6050C | User Manual - Page 61
    and be damaged. When the scanner detects that a skewed page is contacting the edge of the transport path, an error message is displayed and transport stops scanning. • Note that the ISIS/TWAIN driver has a Deskew function that can detect a skewed document from the scanned image, and straighten it. ■
  • Canon DR-6050C | User Manual - Page 62
    settings: Scanner: Long Document Mode [ON1] Page Size: Auto-Detection • If scanning is performed when Long Document Mode is enabled, the image may be contact your dealer or service representative. Hint • The text to print and the printing position can be specified in the ISIS/TWAIN driver. (See p. 8-
  • Canon DR-6050C | User Manual - Page 63
    with the capability to change certain scanner functions. User Mode Operating Procedure User Mode operations are controlled by the following procedure. Hint Operating procedures differ according to User Mode function. For details, refer to the indicated pages. 1. Press the Menu key on the control
  • Canon DR-6050C | User Manual - Page 64
    3. Press [Enter]. Enter Key The current setting is indicated by blinking square brackets [ ]. 4. Press the [ ] or [ ] key to select [ON2], [ON1] or [OFF], and press [Enter] to accept the selection. 5. Press the [Stop] key to exit the User Mode. Chapter 4 Other Functions 4-9
  • Canon DR-6050C | User Manual - Page 65
    User Mode. ■ Buzzer (Beeper) Control Setting Chapter 4 Other Functions ■ Staple Detection Level Setting The beeper ("buzzer") sounds when you press the control panel keys and when a scanning error occurs. ON2: The beeper sounds when a scanner error a paper jam indication, and transport stops. 4-10
  • Canon DR-6050C | User Manual - Page 66
    using the USB interface, change this setting to [OFF]. ■ Tray Position Setting The document feed tray should be set to fit the number of document sheets to be loaded. (See "Preparing the Document Feed Tray" on p. 3-6.) For the DR-6050C 0: Up to 300 sheets 1: Up to 100 sheets For the DR-7550C/9050C
  • Canon DR-6050C | User Manual - Page 67
    functions in the User Mode ■ Total Counter Displays the lifetime total number of document pages fed by the scanner. ■ Roller Counter Displays the number of document pages fed since roller installation or replacement (pickup, feed, and retard rollers). Make sure to reset this counter when replacing
  • Canon DR-6050C | User Manual - Page 68
    Chapter 5 Maintenance 1. Regular Maintenance 5-2 Cleaning the Scanner 5-2 Cleaning the Sensors 5-2 Cleaning the Scanning Glass and Rollers 5-3 Power Outlet 5-4 2. Replacing the Transport Rollers 5-5 Roller Replacement Cycle 5-5 Checking and Resetting the Page Counter...........5-5 Removing
  • Canon DR-6050C | User Manual - Page 69
    cause spots to appear in scanned images. Use compressed air to periodically clean dust and paper particles from the inlet and the inside of the scanner. After completing large scanning jobs, turn OFF the scanner and clean out any paper particles. Cleaning the Sensors Dust and debris that collects
  • Canon DR-6050C | User Manual - Page 70
    glass or transport rollers inside the scanner may be dirty. Please clean periodically. IMPORTANT Scratches on the scanning glass may cause spots or streaks on scanned images, as well as feeding errors. If you find a scratch on the scanning glass, contact your local authorized Canon dealer or service
  • Canon DR-6050C | User Manual - Page 71
    a moistened and firmly wrung-out cloth. IMPORTANT If paper jams or double feeds occur frequently even after cleaning the rollers, the probable cause is the roller friction. If this happens, replace the rollers. Contact your service representative. Power Outlet If you leave the power plug connected
  • Canon DR-6050C | User Manual - Page 72
    document feed errors, such as paper jams, become more likely. If document feed errors continue to occur after cleaning the rollers, purchase the Roller Replacement Kit and replace the transport rollers (pickup, feed, and retard rollers). Roller Replacement Cycle The feeding rollers are consumables
  • Canon DR-6050C | User Manual - Page 73
    Mode. Chapter 5 Maintenance The counter reset mode is activated. Menu Key 4. Press the [ ] key to select [RESET], and press [Enter]. The counter is reset to zero. 5. Press the [Stop] key to exit the User Mode. 2. Press the [ ] key twice to display [Roller Counter]. 3. Check the number of pages
  • Canon DR-6050C | User Manual - Page 74
    force on the rollers when removing or reinstalling the rollers. Deformation of the rollers may cause feed errors. Pickup Roller Feed Roller 2. Open the roller cover. 3. Open the roller holder. Chapter 5 Maintenance Retard Roller ■ Removing and Reinstalling the Pickup Roller 1. Press the Open
  • Canon DR-6050C | User Manual - Page 75
    holder, and insert the new pickup roller. Chapter 5 Maintenance IMPORTANT Failure to firmly close the roller holder and roller cover may cause a feed error. Always be sure to check that the roller holder and roller cover are closed. 7. Gently lower the upper unit (a). Press down on both sides
  • Canon DR-6050C | User Manual - Page 76
    the feed roller. Chapter 5 Maintenance 3. Pull the roller lock lever down. 6. Place the new feed roller on the pin. 4. Slide the feed roller to the right, and then pull them towards you. 7. Put the feed roller in place (a), and align the notch in the roller's axle with the shaft on the scanner
  • Canon DR-6050C | User Manual - Page 77
    position. ■ Removing and Reinstalling the Retard Roller 1. Press the Open/Close button and carefully raise the upper unit until it stops. IMPORTANT Failure to firmly close the roller cover may cause a feed error. Always be sure to check that the roller cover is closed. Open/Close Button 5-10
  • Canon DR-6050C | User Manual - Page 78
    it. Chapter 5 Maintenance 5. Set the retard roller into place in the scanner. 3. Push the roller lock lever up (a) and move it to the left (b) to unlock the roller. 6. Align the notches in the roller with the shaft pins in the scanner, then slide the roller lock lever in the direction indicated
  • Canon DR-6050C | User Manual - Page 79
    unit to ensure that it is securely closed (b). 9. Push the front of the roller cover in. Check that it makes a latching sound and that it is securely and the roller cover is not loose. If the roller cover is loose, the Document Feed Tray will catch on it causing the scanner to malfunction. 5-12
  • Canon DR-6050C | User Manual - Page 80
    Cartridge Replacement and Cleaning When the . (See "Imprinter Testing" on p. 5-17.) 1. Spread the document guides all the way to the left and right. 2. With your finger, cartridges. For details, contact your local authorized Canon dealer or service representative. Product Name: Ink Cartridge (Blue)
  • Canon DR-6050C | User Manual - Page 81
    3. Open the imprinter cover until it makes contact with the eject tray. Chapter 5 Maintenance 6. Peel off the seal covering the nozzles of a new ink cartridge. Hint Perform the steps that follow with the imprinter cover fully open. 4. Pull the lock lever outward (a) to release the ink cartridge
  • Canon DR-6050C | User Manual - Page 82
    that it is locked so that it will not open unexpectedly. An error message appears on the display panel if the imprinter cover is open. carriage to a position where it clicks in. Specifying the Printing Position Manually specify the printing position in the horizontal direction of the document.
  • Canon DR-6050C | User Manual - Page 83
    of the lock lever with the desired printing position. Chapter 5 Maintenance Cleaning the Imprinter ■ Cleaning the Guide Plate Ink that collects on the guide plate inside the optional imprinter may stain the documents when they are scanned. Clean off the ink with water and a mild detergent on a soft
  • Canon DR-6050C | User Manual - Page 84
    the control panel. Menu Key Imprinter Testing After replacing an ink cartridge or cleaning the print head, perform a test print to confirm proper printing. Test printing is performed by the "Imprinter Test" User Mode selection. IMPORTANT Before performing an Imprinter Test, load a sheet of paper
  • Canon DR-6050C | User Manual - Page 85
    The Imprinter Test is enabled. 5. Press the [ ] key to select [OK], and press [Enter]. The test print is executed. IMPORTANT If no paper is loaded for test printing, the imprinter test finishes without printing. 6. Press the [Stop] key to exit the User Mode. Chapter 5 Maintenance 5-18
  • Canon DR-6050C | User Manual - Page 86
    Chapter 6 Practical Examples 1. Messages 6-2 Status Display 6-2 Error Messages 6-3 2. Troubleshooting 6-5 Trouble Categories 6-5 Problem and Solution 6-5 3. Uninstalling the Software 6-9 Uninstalling the ISIS/TWAIN Driver 6-9
  • Canon DR-6050C | User Manual - Page 87
    messages: "status indicator messages" and "error messages" that appear when the scanner encounters a problem. Status Display The following messages appear on the display panel to indicate the scanner's operating state: ■ Counting... ■ Sleeping... Status: The scanner is entering the Sleep mode
  • Canon DR-6050C | User Manual - Page 88
    Problem: The pickup roller cover is open. Solution: Close the pickup roller cover. (See p. 5-8.) ■ Jam Hint The displayed error code indicates the location of the paper jam. • P001, P002: The document is jammed near the feed inlet. • P004: The document is jammed inside the scanner. • P006, P007
  • Canon DR-6050C | User Manual - Page 89
    Feed Tray, and scan again. (See p. 3-24.) ■ Staple Detected Error Code: E021 Problem: An error has occurred with the Document Feed Tray. Solution: Turn the power OFF, and restart the scanner. ■ Count Mismatch Error Code: U001 Problem: The specified count has not yet been reached. Solution: Check
  • Canon DR-6050C | User Manual - Page 90
    your local authorized Canon dealer or service representative for more information. Cause The scanner does not support the USB cable. Solution Use the USB cable provided with the scanner. Cause The USB hub is not compatible with the scanner. Solution Remove the USB hub. Problem and Solution ■ The
  • Canon DR-6050C | User Manual - Page 91
    the PC's USB interface support only Full-Speed USB 1.1? ✔ Is the USB cable you are using the one that was supplied with the scanner (Hi-Speed USB 2.0 compliant)? ✔ Is a USB 1.1-compliant device connected to the USB hub at the same time? If this does not solve the problem, consider the following
  • Canon DR-6050C | User Manual - Page 92
    Scanning Results Are Not as Expected If the scanned images do not appear as expected, one or more ISIS/TWAIN driver settings may be incorrect, or your application may not support certain scanner functions. Problem Cause Solution The scanned image is too dark (or faint). The [Brightness] setting is
  • Canon DR-6050C | User Manual - Page 93
    p. 5-2.) If lines still appear on the image even after you clean the scanning glass and rollers, the scanning glass inside the scanner may be scratched. Contact your local authorized Canon dealer or service representative. Problem Cause Solution The scanned image is abnormal for certain documents
  • Canon DR-6050C | User Manual - Page 94
    3. Uninstalling the Software Some scanner malfunctions can be resolved by reinstalling the software. Before reinstalling the software, make sure to completely uninstall any previous installation first. Uninstalling the ISIS/TWAIN Driver The following procedure uses the ISIS/TWAIN driver as an
  • Canon DR-6050C | User Manual - Page 95
    4. Click the [Continue] button. The file-deletion confirmation screen appears. 5. Click [Yes] to proceed with uninstallation. 6. When uninstallation is finished, click [Finish]. Chapter 6 Practical Examples 6-10
  • Canon DR-6050C | User Manual - Page 96
    Chapter 7 Appendix 1. Specifications 7-2 Unit Specifications 7-2 Options 7-3 Consumables 7-3 External Dimensions 7-4 2. Option Specifications 7-5 Barcode Specifications 7-5 Imprinter Specifications 7-6 3. Index 7-7
  • Canon DR-6050C | User Manual - Page 97
    , and Continuous Manual Document Feeder Capacity DR-6050C: Up to 300 sheets of good quality paper or up to 1.10" (28 mm) high (maximum) DR-7550C/9050C: Up to 500 sheets of good quality paper or up to 1.89" (48 mm) high (maximum) Scanning Sensor Contact image sensor Light Source LED Scanning Sides
  • Canon DR-6050C | User Manual - Page 98
    are consumable parts. When the rollers start to wear out, problems, such as paper jams and misfeeds, are more likely to occur. If this happens, replace the rollers, regardless of the page count. • For information about the roller replacement kit, contact your local authorized Canon dealer or service
  • Canon DR-6050C | User Manual - Page 99
    External Dimensions Chapter 7 Appendix 18.90" (480 mm) 12.24" (311 mm) 15.35" (390 mm) 6.38 " (162 mm) 20.91" (531 mm) 23.62" (600 mm) 28.27" (718 mm) 7-4
  • Canon DR-6050C | User Manual - Page 100
    Specifications The following barcodes can be read by installing the optional barcode module. ■ Barcode Types Code No. of Digits Checksum EAN Codabar Code 39 ITF Code 128 UPC-A UPC-E 8 or 13 Modulus 10, Weight 3 3 to 32 (including Modulus 16, 7 DR -E add-ons supported ■ Detection Conditions
  • Canon DR-6050C | User Manual - Page 101
    barcodes Imprinter Specifications Printing Side Front Position Set in the ISIS/TWAIN driver (See p. 8-26) One of 15 positions Printing Content Set in the ISIS/TWAIN driver Imprinter Font Blue, Red, Green (see p. 5-13) Image Density 12 nozzles/oblique line (96 dpi) Ink Type Water-based 7-6 Chapter
  • Canon DR-6050C | User Manual - Page 102
    C CapturePerfect 3.0 3-15 Cleaning glass 5-3 power outlet 5-4 print heads 5-16 rollers 5-3 scanner 5-2 sensors 5-2 Cleaning Cloth 5-2 Connecting to 3-4 M Maintenance 5-2 Manuals iii Messages 6-2 Moving the Scanner 1-3 O Other Functions 4-2 P Paper Jams 3-23 Part Names and Functions 1-
  • Canon DR-6050C | User Manual - Page 103
    6-9 Staple Detection 4-6 Status Display 6-2 System Requirements 2-3 T Terminator 2-8 Troubleshooting 6-5 trouble categories 6-5 U Ultrasonic Double-Feed Detection 4-5 USB Connection 2-6 USB Connector 2-6 User Mode 4-8 functions 4-10 operating procedure 4-8 V Verify Count 4-4 Verify
  • Canon DR-6050C | User Manual - Page 104
    User Manual Software Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference.
  • Canon DR-6050C | User Manual - Page 105
    ISIS/TWAIN Driver Settings 1. Before You Start Using the Scanner 8-2 2. ISIS/TWAIN Driver Settings Dialog Box ...........8-4 [Basic] Tab Sheet 8-6 [Brightness] Tab Sheet 8-14 [Image -4 Specifying the Scanning Area 10-5 Configuring Scanner Settings According to the Purpose 10-6 Registering Your Settings
  • Canon DR-6050C | User Manual - Page 106
    Chapter 8 ISIS/TWAIN Driver Settings 1. Before You Start Using the Scanner 8-2 2. ISIS/TWAIN Driver Settings Dialog Box .......... 8-4 [Basic] Tab Sheet 8-6 [Brightness] Tab Sheet 8-14 [Image processing] Tab Sheet 8-16 [Others] Tab Sheet 8-18 [Imprinter/Addon] Tab Sheet 8-25
  • Canon DR-6050C | User Manual - Page 107
    ] menu. CapturePerfect 3.0 starts. The [Select Scanner] dialog box opens. 3. Select [CANON DR-XXXX], and click [Settings]. (XXXX varies depending on the model you are using) IMPORTANT If [CANON DR-XXXX] does not appear, try reinstalling the ISIS/ TWAIN driver. 4. Select the default page size and
  • Canon DR-6050C | User Manual - Page 108
    IMPORTANT • Clicking the [Default] in the ISIS Driver Properties dialog box, the setting is applied here. • For the TWAIN driver, the default paper size is LTR/A4 and cannot be changed. 5. Click [OK] to finish scanner selection. Chapter 8 ISIS/TWAIN Driver Settings 8-3
  • Canon DR-6050C | User Manual - Page 109
    ISIS/TWAIN Driver Settings 2. ISIS/TWAIN Driver Settings Dialog Box If menus or buttons are selected to configure the scanner settings from an application tool such as CapturePerfect 3.0 or the Job Registration Tool, the following ISIS/TWAIN Driver Settings dialog box is displayed. The ISIS/TWAIN
  • Canon DR-6050C | User Manual - Page 110
    • [Basic] Tab Sheet (See p. 8-6) Chapter 8 ISIS/TWAIN Driver Settings • [Image processing] Tab Sheet (See p. 8-16) • [Brightness] Tab Sheet (See p. 8-14) • [Others] Tab Sheet (See p. 8-18) 8-5
  • Canon DR-6050C | User Manual - Page 111
    the screen that is displayed. ■ [Basic] Tab Sheet Types The following types of Basic tab sheets can be displayed. [Basic] Tab (ISIS/TWAIN driver) This [Basic] tab sheet is displayed for application programs such as CapturePerfect and Job Registration Tool. Buttons [OK] button Applies the settings
  • Canon DR-6050C | User Manual - Page 112
    7550C/9050C ISIS Driver is utilized from a scanner setting or scanning dialog box belonging to an ISIScompatible application program. This tab sheet contains settings for the scanner functions that are not supported in the dialog box belonging to the application program. Chapter 8 ISIS/TWAIN Driver
  • Canon DR-6050C | User Manual - Page 113
    -while (binary) images. [Error Diffusion] Use this mode to scan documents containing photos as black-and-white (binary) images. [Advanced Text sheet. Chapter 8 ISIS/TWAIN Driver Settings • If the background is non-uniform, such as a pattern, the background remains visible in the image, and text may
  • Canon DR-6050C | User Manual - Page 114
    resolution. Chapter 8 ISIS/TWAIN Driver Settings • Adjust the [Content density] setting in the [BlankSkip Setting] dialog box if you specify [Skip blank page], but blank pages are not skipped, or if non-blank pages are skipped. Hint • Higher resolutions provide clearer images, but produce larger
  • Canon DR-6050C | User Manual - Page 115
    Color], and the scanning side is [Duplex], the scanner may run out of memory and unable to scan the entire document. If this occurs, enable [Speed priority] and scan images of lower quality, or set the scanning side to [Simplex]. [Scan Options] (TWAIN driver only) Specify the operation when scanning
  • Canon DR-6050C | User Manual - Page 116
    Sheet Image processing Others Chapter 8 ISIS/TWAIN Driver Settings ■ [Auto Image Type ISIS driver) JPEG Transfer Color drop-out Prevent Bleed Through / Remove Background Border Removal Erase Dot Edge emphasis Moire Reduction Deskew Scanning Modes Auto Color Detection Black and White Error
  • Canon DR-6050C | User Manual - Page 117
    Driver) Chapter 8 ISIS/TWAIN Driver Settings Scan Area Dialog Box (TWAIN Driver) This dialog box appears with application programs that display the [Scan] button in the Properties dialog box. (Area Window) The Area panel and [Preview] button are not displayed when using application programs, like
  • Canon DR-6050C | User Manual - Page 118
    page sizes can be registered as custom page sizes. Chapter 8 ISIS/TWAIN Driver Settings Margin This control adjusts the top, bottom, left, and right in the [Image Processing] tab • If [Deskew] is enabled in the [Basic] tab, the specified region is scanned offset. Area Window The size indicated
  • Canon DR-6050C | User Manual - Page 119
    tab sheet. Chapter 8 ISIS/TWAIN Driver Settings The availability of brightness - ✔ ✔ ✔ ✔ Black and White ✔ ✔ ✔ ✔ ✔ Error Diffusion - ✔ ✔ ✔ ✔ Advanced Text Enhancement - ✔ - - Brightness Adjusts the brightness of images to be scanned. Hint • If images are too dark or if
  • Canon DR-6050C | User Manual - Page 120
    Adjusts the contrast of images to be scanned. [ ISIS/TWAIN Driver Settings Select Select the side and color for custom setting. Hint The color bar and color of the sample image Curve Graph, and sample image color are interlinked. When you curve and color of the sample image to match that point. • You
  • Canon DR-6050C | User Manual - Page 121
    Chapter 8 ISIS/TWAIN Driver Settings Hint • Click any point in the Gamma Curve Graph to settings as a gamma table file (*.pxg). [Image processing] Tab Sheet The [Image processing] tab sheet provides settings affecting the processing of scanned images. Some settings may be disabled, depending on
  • Canon DR-6050C | User Manual - Page 122
    the selected angle. Feeder Document: Face Up Document Orientation (Clockwise) 0 degrees 90 degrees 180 degrees 270 degrees Output Image [Reverse Image] Check Box (TWAIN driver only) Select this check box to output images scanned in blackand-white (binary) with the black-and-white shades reversed
  • Canon DR-6050C | User Manual - Page 123
    displayed for the TWAIN driver. ■ [Others] Tab Sheet Settings You can configure the following settings on the [Others] tab sheet. [Rapid Recovery System] Check Box If a paper jam causes paper transport to stop while scanning, scanning stops without sending an error notification to the application
  • Canon DR-6050C | User Manual - Page 124
    for output to the computer. Hint • Scanned image data is output from the scanner as an uncompressed or JPEG transfer, depending on instructions from the ISIS/TWAIN driver or application program. - With uncompressed transfer, scanned image data is output without being compressed. Therefore, if
  • Canon DR-6050C | User Manual - Page 125
    ISIS/TWAIN Driver up. Start scanning with an application program and feed documents manually one at a time. The scanner detects a document and then scans it. Press the stop document guide position after loading a document. [Automatic Feeding] Execute scanning with an application. The scanner starts
  • Canon DR-6050C | User Manual - Page 126
    option settings. [Standard Feeding] Feeding Option [Manual Feeding] Feeding Option Chapter 8 ISIS/TWAIN Driver Settings IMPORTANT • When [Patchcode] is selected, T (File A) Patch II (File B) Patchcode Orientation 0 degrees 90 degrees 180 degrees 270 degrees [Panel-Feeding] or [Automatic Feeding]
  • Canon DR-6050C | User Manual - Page 127
    confirm or adjust brightness and contrast of the scanned image in the Prescan window. Chapter 8 ISIS/TWAIN Driver Settings ■ [Barcode] Dialog Box Settings The • For details on barcode specifications, see "Barcode Specifications" on p. 7-5. • If your application supports barcodes, barcode data that
  • Canon DR-6050C | User Manual - Page 128
    0 degrees 90 degrees Search Area [Enable] check box Select this check box to limit barcode detection to within a specified area of the document, and then enter the start positions and end positions for the horizontal direction and vertical direction. Chapter 8 ISIS/TWAIN Driver Settings Hint
  • Canon DR-6050C | User Manual - Page 129
    [Method] Select the checksum calculation method. Code 128 Detect Code 128 barcodes. [Enable] Detect and read Code 128 barcodes. Chapter 8 ISIS/TWAIN Driver Settings ITF Detect ITF barcodes (including industrial 2 of 5). [Enable] Detect and read ITF barcodes. [Checksum] Read the checksum included in
  • Canon DR-6050C | User Manual - Page 130
    if the optional imprinter unit is installed. Chapter 8 ISIS/TWAIN Driver Settings Check Boxes [Imprinter] Check Box Configure settings for scanner LCD if scanning is performed without the ink cartridge. [Addon] Check Box Configure settings for adding any character string or counter on scanned images
  • Canon DR-6050C | User Manual - Page 131
    ISIS/TWAIN Driver Settings [Single counter with number of characters] abbreviation: A dialog box appears in which to specify the number of characters of the single counter. A counter of the specified number of characters will be imprinted or added on scanned images limit, an error message is
  • Canon DR-6050C | User Manual - Page 132
    ISIS/TWAIN Driver Settings Orientation Specify the orientation of characters to be imprinted or added. Hint Text orientation relative to the feeding direction is as follows. Orientation 0 degrees 90 . [White on Black] Add white text on to a black background. [Black on Image] Add black text on to an
  • Canon DR-6050C | User Manual - Page 133
    Make settings for add-on counters. Chapter 8 ISIS/TWAIN Driver Settings [Reset Value] Select the initial value when the counter is reset. [Reset Trigger] Select the trigger for resetting the counter. [New File] (ISIS driver only) The counter is reset when a batch separation occurs according to the
  • Canon DR-6050C | User Manual - Page 134
    Chapter 9 Job Registration Tool Settings 1. Before Use 9-2 Job Function 9-2 Starting the Job Registration Tool 9-2 2. Job Registration Tool 9-3 3. Settings Dialog Boxes 9-5 [New/Editing] Dialog Box 9-5 [Admin] Dialog Box 9-8
  • Canon DR-6050C | User Manual - Page 135
    . Hint • Job registration stores scanning condition settings, image file format selection, save destination and image data processing settings for each job to be used ] button, and then click [All Programs] - [Canon DR-XXXX] - [Job Registration Tool]. (XXXX varies depending on the model you are
  • Canon DR-6050C | User Manual - Page 136
    Job Registration Tool The Job Registration Tool consists of the main window below and the [New/Editing] and [Admin] dialog boxes. Menu Open the [Admin] dialog box to configure settings for monitoring the storage folder for images and backing up job data. (See "[Admin] Dialog Box" on p. 9-8.) [Help]
  • Canon DR-6050C | User Manual - Page 137
    Job List Displays the job numbers (01 to 99) and job titles. Job Information Displays the information for the job selected in the job list. [Close] Button Ends the Job Registration Tool. Chapter 9 Job Registration Tool Settings 9-4
  • Canon DR-6050C | User Manual - Page 138
    Chapter 9 Job Registration Tool Settings 3. Settings Dialog Boxes The settings dialog boxes of the Job Registration Tool include the [New/Editing] dialog box and [Admin] dialog box. For details, see the description of each dialog box. Hint See "About the Job Function" on p. 3-14 for the procedure
  • Canon DR-6050C | User Manual - Page 139
    [Setting] button to configure scanner settings. Chapter 9 Job Registration Tool Settings File type Enter the file format for saved files. [Save to Pictures folder] Check Box Select this check box to save image files to the Pictures folder of the user logged in to Windows. Hint • The name displayed
  • Canon DR-6050C | User Manual - Page 140
    rate setting is enabled when the scanner is set to [256-level Gray] or [24-bit Color] mode. When [Black and White] or [Error Diffusion] binary image scanning mode is selected, file size depends on the content of the scanned document. Language for OCR When the [Apply OCR] check box is selected, the
  • Canon DR-6050C | User Manual - Page 141
    box is selected, a standard level of JPEG compression is applied. IMPORTANT If your application program does not support the above compression formats, you may be unable to open scanned image files. In this case disable [Compression] when scanning. [Admin] Dialog Box The [Admin] dialog box allows
  • Canon DR-6050C | User Manual - Page 142
    the specified limit. • If a warning message appears, follow the instructions in the message to either continue scanning or change the save destination a different environment, such as occurs when multiple users log on to Windows or when multiple scanners are used. [Back Up] Button Writes a backup
  • Canon DR-6050C | User Manual - Page 143
    Settings 10-2 Confirming the Basic Conditions for Scanning....10-2 2. Practical Examples 10-4 Scanning Documents of Unregistered Page Sizes 10-4 Specifying the Scanning Area 10-5 Configuring Scanner Settings According to the Purpose 10-6 Registering Your Settings 10-11
  • Canon DR-6050C | User Manual - Page 144
    minimum requirements when configuring the scanner settings. For details on settings, see Chapter 8 "ISIS/TWAIN Driver Settings Dialog Box". Confirming the . • [Auto Color Detection] saves color images for color documents, and black and white images for black and white documents. Page Size Select
  • Canon DR-6050C | User Manual - Page 145
    which page side(s) to scan. Hint • If the scanning side is set to [Skip blank page], the images of blank pages are deleted when the images are saved. • [Folio] recombines the front and back images scanned from both sides of the document into a single image. Chapter 10 Practical Examples 10-3
  • Canon DR-6050C | User Manual - Page 146
    Chapter 8 "ISIS/TWAIN Driver Settings Dialog Box (3 m) long. 1. In the User Mode, set [Long Document] of the scanner settings to [ON1] or [ON2]. the scanning side set to [Duplex], the image may be lost. If this occurs, [Deskew], or document orientation of [90 degrees] or [270 degrees] cannot be
  • Canon DR-6050C | User Manual - Page 147
    ] tab sheet. (See p. 8-13.) Front Back Separation Off Key Reconstructed Image Specifying the Scanning Area Configure the following settings when you want to specify the Area dialog box. (See p. 8-12.) Hint Folio Scan supports up to A1-size (23.4" × 33.1" (594 × 841 mm)) documents when used
  • Canon DR-6050C | User Manual - Page 148
    Hint • With the TWAIN driver, load the document you want to specify the area of and press the [Preview] button to scan the document and display the preview image in the Area panel. You can then specify the area from the displayed preview image. Configuring Scanner Settings According to the
  • Canon DR-6050C | User Manual - Page 149
    ■ When you want to skip or enhance intermediate colors Select an intermediate color in [Color drop-out] on the [Image processing] tab sheet. Click the [Setting] button to display the Color Settings dialog box, and then you can specify the color range of the intermediate
  • Canon DR-6050C | User Manual - Page 150
    advanced text enhancement for scanning. ■ When you want to eliminate black borders around scanned images Select [Border Removal] on the [Image processing] tab sheet. The black borders created around scanned images are removed. Hint Moire reduction is enabled when the resolution is 300 dpi or less
  • Canon DR-6050C | User Manual - Page 151
    white in scanned images (TWAIN driver only) Select [Reverse Image] on the [Image processing] tab sheet. This outputs scanned images with black and documents are judged to be black and white. (See p. 8-11.) Hint The ISIS driver does not have a function for reversing black and white. ■ When you want
  • Canon DR-6050C | User Manual - Page 152
    ] tab sheet. (See p. 8-17.) The text orientation on each page is detected, and the scanned image is rotated in 90-degree increments to correct the orientation. Text Orientation Output Image Hint Images are rotated as follows according to the orientation of the loaded document and the selected angle
  • Canon DR-6050C | User Manual - Page 153
    side setting to [Skip blank page] on the [Basic] tab sheet, the images of blank pages in the document are deleted. (See p. 8-9.) Chapter 10 Practical time. ■ Registering scanning conditions Name and register the scanning conditions in [User Preference] on the [Basic] tab sheet. When you want to use
  • Canon DR-6050C | User Manual - Page 154
    INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
Please read this manual before using the scanner.
After you finish reading this manual, keep it in a safe place for future reference.
User Manual
DR-9050C/DR-7550C
DR-6050C