Canon DR 7090C Reference Guide

Canon DR 7090C - imageFORMULA - Document Scanner Manual

Get Canon DR 7090C - imageFORMULA - Document Scanner PDF manuals and user guides
UPC - 013803100242
View all Canon DR 7090C manuals
Add to My Manuals
Save this manual to your list of manuals

Canon DR 7090C manual content summary:

  • Canon DR 7090C | Reference Guide - Page 1
    Reference Guide Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference.
  • Canon DR 7090C | Reference Guide - Page 2
    reproduce and include the copyright notice on the back-up copy. 3. SUPPORT AND UPDATE: Canon, Canon's affiliate, their distributor or dealer is not Canon's affiliate, their distributor or dealer will not guarantee uninterrupted service, or absence or correction of errors. Therefore, the SOFTWARE is
  • Canon DR 7090C | Reference Guide - Page 3
    NEITHER CANON, CANON'S AFFILIATE, THEIR DISTRIBUTOR NOR DEALER IS LIABLE FOR ANY LOSS OR DAMAGE INCLUDING CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE SUCH AS LOSS OF PROFITS, EXPENSE OR INCONVENIENCE, WHATSOEVER CAUSED BY OR ARISING OUT OF THE SOFTWARE, ACCOMPANYING DOCUMENTATION OR THE USE THEREOF.
  • Canon DR 7090C | Reference Guide - Page 4
    if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to
  • Canon DR 7090C | Reference Guide - Page 5
    your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit www.canon-europe.com/environment. (EEA: Norway, Iceland and
  • Canon DR 7090C | Reference Guide - Page 6
    for use. Please follow the procedures in the Easy Start Guide to set up the scanner. Reference Guide (This Manual) This manual consists of the basic scanner operating instructions extracted from the User Manual. User Manual This manual consists of two sections: Hardware and Software. The Hardware
  • Canon DR 7090C | Reference Guide - Page 7
    symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety Examples Describes displayed messages and troubleshooting solutions Chapter 5 Appendix Provides a list of specifications and support information vi
  • Canon DR 7090C | Reference Guide - Page 8
    in This Manual vi How This Manual is Organized vi Chapter 1 Before You Start Using the Scanner 1. Important Safety Instructions 2 Installation 54 Status Display 54 Error Messages 55 2. Troubleshooting 57 Trouble Categories 57 Problem and Solution 57 Chapter 5 Appendix 1. Specifications
  • Canon DR 7090C | Reference Guide - Page 9
    Chapter 1 Before You Start Using the Scanner 1. Important Safety Instructions 2 Installation Location 2 Removing the Transportation Screw 2 Installing the Securing Braces 3 Power 3 Checking the Rear Cables 4 Opening and Closing the Feeder 4 Moving the Scanner 4 Handling 5 Disposal 7 2.
  • Canon DR 7090C | Reference Guide - Page 10
    1. Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. Installation Location The performance of this
  • Canon DR 7090C | Reference Guide - Page 11
    power cord can be disconnected easily in an emergency. ● If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information. 3
  • Canon DR 7090C | Reference Guide - Page 12
    Checking the Rear Cables Before connecting to the computer, make sure that cable connectors to are properly connected at the rear of the scanner. ● Close the feeder carefully and slowly, taking care to avoid pinching your fingers. Opening and Closing the Feeder ● Open the feeder carefully and
  • Canon DR 7090C | Reference Guide - Page 13
    Before You Start Using the Scanner ● Make sure to disconnect the interface cable and power cord when moving the scanner. If the scanner is carried with these items connected, the Handling 1 plugs and connectors may be damaged or cause WARNING the scanner to fall and result in personal injury
  • Canon DR 7090C | Reference Guide - Page 14
    , immediately turn the power switch OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative for further information. ■ Do not drop the scanner, or subject it to impact or strong shock. Should the scanner ever become damaged
  • Canon DR 7090C | Reference Guide - Page 15
    ■ Turn OFF the power switch for safety when not using the scanner for a long period of time, such as overnight. Also, turn OFF the power switch, and Disposal ● When disposing of this scanner, make sure to 1 disconnect the power cord from the power outlet follow all local ordinances and laws or
  • Canon DR 7090C | Reference Guide - Page 16
    mode settings, two-sided documents are scanned one side at a time. ● Flatbed scanning Flatbed scanning is also supported for thin paper, paper that does not feed properly, magazines, bound documents, and other documents that cannot be For details on the User Mode settings, refer to the User Manual.
  • Canon DR 7090C | Reference Guide - Page 17
    Detection Functions ● Auto Paper Size Detection The document page size is detected before scanning. Fixed-Size Scanning Auto-Size Detection Scanning ● Text Orientation Detection The text orientation on each page is detected, and the scanned image is rotated in 90-degree increments as necessary
  • Canon DR 7090C | Reference Guide - Page 18
    from a single scan pass. However, this function is only available when using CapturePerfect 3.0 (supplied with the scanner) or another application program that supports the MultiStream function. Document to be Scanned (150 dpi, Color) (300 dpi, Black & White) Two Types of Output Image ● Patchcode
  • Canon DR 7090C | Reference Guide - Page 19
    This indicator lights when there is a document in the document feeder tray. When a paper jam occurs, this indicator flashes. (See p. 35.) d Slide Guide Adjust this guide to the marking on the document size label that indicates the applicable document size. e Document Feeder Tray Load documents to be
  • Canon DR 7090C | Reference Guide - Page 20
    using the DIP switches located between the SCSI connectors and power cord connector. For details on the settings, refer to the User Manual. SCSI ID Terminator 1 2 3 4 a Air Vents b USB Connector Connect a Hi-Speed USB 2.0 compatible USB cable here. c DIP Switches Configure these switches to
  • Canon DR 7090C | Reference Guide - Page 21
    Before You Start Using the Scanner Operation Panel f New File Key This key is active for applications that support batch separation. This key lights when pressed or in accordance 1 with the application's batch separation settings. Scanning the next document while this key is lit
  • Canon DR 7090C | Reference Guide - Page 22
    4. Optional Products The following options can be purchased and used on the DR-7090C, if they are necessary. Contact your sales representative. Stamp Unit The stamp unit affixes a stamp on document pages that are scanned using the feeder. The application can be used to turn stamping on or off. The
  • Canon DR 7090C | Reference Guide - Page 23
    Chapter 2 Basic Operation 1. Turning the Power ON 16 About the Power Switch 16 2. Documents 17 Types of Documents 17 3. Placing Documents onto the Scanner 19 Loading a Document into the Feeder 19 Positioning a Document on the Flatbed (Platen Glass 20 4. Document Feeding 22 Scan Procedure 22
  • Canon DR 7090C | Reference Guide - Page 24
    1. Turning the Power ON This section describes how to turn ON the scanner. About the Power Switch The power switch is located on the scanner's side panel, and the following appears on the display panel when the power switch is turned ON. (See p. 54.) Power Switch Display panel IMPORTANT • When
  • Canon DR 7090C | Reference Guide - Page 25
    2. Documents This section describes the various types of documents that can be scanned with the feeder. CAUTION Handle documents with care. Improper handling of paper can cause paper cuts or other personal injury. Types of Documents Follow these guidelines when you prepare a document for 2
  • Canon DR 7090C | Reference Guide - Page 26
    • To avoid paper jams, damage to documents, and a scanner malfunction, do not feed the following types of paper. For such documents, scan one page at a time from the flatbed (platen glass). Wrinkled or creased paper Carbon-backed paper Curled paper Coated paper Torn paper Paper with clips or
  • Canon DR 7090C | Reference Guide - Page 27
    . 2 Basic Operation Loading a Document into the Feeder Perform the following steps to load the pages of a document into the feeder for scanning. 1. Adjust each slide guide so its pointer is aligned with the corresponding paper size on the document size label. Document Set Indicator Slide
  • Canon DR 7090C | Reference Guide - Page 28
    • When scanning NCR paper that is 11" x 17"/A3 or other large sizes, as well as paper that is very thin, the document may occasionally get caught in the paper eject mechanism. In this case, place an auxiliary sheet of paper in the document eject tray before scanning the document. Positioning a
  • Canon DR 7090C | Reference Guide - Page 29
    2. Place the document onto the flatbed (platen glass) with the scanning side facing downwards. 3. Slowly and carefully lower the feeder back down. 2 Basic Operation With the scanning side of the document facing downwards, align its corner with the arrow mark in the upper left corner of the
  • Canon DR 7090C | Reference Guide - Page 30
    (See p. 22) With this mode, you start and stop scanning from an application on your computer. After placing the document onto the scanner, instruct the scanner from your computer to start scanning. Panel Feeding (See p. 23) Panel feeding comes in handy when using the feeder for continuous scanning
  • Canon DR 7090C | Reference Guide - Page 31
    IMPORTANT 3. Place the document onto the scanner. See "Placing Documents onto the Scanner" on p. 19 for information about placing documents onto the scanner. 3. From the application you are using, execute the required command to start scanning. Scanning starts. 2 4. When scanning of the
  • Canon DR 7090C | Reference Guide - Page 32
    ■ Automatic Feeding Automatic feeding can be used when feeding a document from the feeder. After you execute the scan start command from the application, the scanner starts scanning automatically whenever it detects a document loaded into the feeder. 1. Select [Automatic Feeding] in [Feeding Option]
  • Canon DR 7090C | Reference Guide - Page 33
    -compliant application that is installed along with the ISIS/TWAIN driver. For details, refer to Chapter 9 "Job Registration Tool Settings" in the User Manual. The Job function has the capabilities listed below, and jobs can be registered using the Job Registration Tool. • Images can be saved to
  • Canon DR 7090C | Reference Guide - Page 34
    on how to register jobs with Job Registration Tool, see Chapter 9 "Job Registration Tool Settings" in the User Manual. IMPORTANT For details on how to place documents, see "Placing Documents onto the Scanner" on p. 19. If the Job Mode is not operating correctly, see "Troubleshooting" on p. 57. 26
  • Canon DR 7090C | Reference Guide - Page 35
    ■ Setting the Events Function 3. Select [Canon DR-7090C] and click [Properties]. The Job function will not function unless [DR7090C Job Tool] is specified for the scanner's Events function in Windows. Before using the Job function, perform the following procedure to configure the scanner's
  • Canon DR 7090C | Reference Guide - Page 36
    . Select the desired scan mode from the Scan menu to perform scanning. For more information on CapturePerfect 3.0, refer to the CapturePerfect 3.0 Operation Guide. 6. Clear all the check boxes under [Send to this application] except for the [DR-7090C Job Tool] check box. 7. Click [Apply]. IMPORTANT
  • Canon DR 7090C | Reference Guide - Page 37
    for using the Scan Batch to File function is described here as an example. For details, refer to the CapturePerfect 3.0 Operation Guide. 1. From the Windows task bar, click [Start] ➔ click [All Programs] ➔ [CapturePerfect 3.0] ➔ [CapturePerfect The scanning conditions and scan mode (Scan Batch to
  • Canon DR 7090C | Reference Guide - Page 38
    for use with your application program. As the scanner selection procedure depends on the application program being used, refer to your application's user's manual as needed to select the scanner. 3. Select [Canon DR-7090C] and click [Settings]. The [Scan Batch to File Setting] dialog box opens
  • Canon DR 7090C | Reference Guide - Page 39
    on the available settings in the [Scan Batch to File Setting] dialog box, refer to the CapturePerfect 3.0 Operation Guide. • If a Feed Option other than [Standard Feeding] or [Manual Feeding] is selected, once you have started scanning, each document placed in the Document Feed Tray is scanned, and
  • Canon DR 7090C | Reference Guide - Page 40
    11. When the [Continue Scanning] dialog box appears, verify that a document is loaded, and click either [Continue Scanning] or [Stop Scanning]. Hint If Use Continue Scanning dialog in the [Scan] menu is not checked, scanning finishes without displaying the Continue Scanning dialog box. 12. When
  • Canon DR 7090C | Reference Guide - Page 41
    to the following structure, and the availability of some functions depend on the application you are using. For details, refer to the User Manual. Basic Setup Dialog Box Allows you to configure basic scan settings. Advanced Settings Dialog Box Allows you to configure processing options for scanned
  • Canon DR 7090C | Reference Guide - Page 42
    ■ Basic Scanning Condition Settings This section provides an overview of the basic setting items that are the minimum requirements when configuring the scanner settings. When you scan a document, make sure to confirm the [Mode], [Page Size], [Dots per inch], and [Scanning Side] basic conditions in
  • Canon DR 7090C | Reference Guide - Page 43
    . 2. Open the feeder cover. Operate the opening lever, and then slowly raise the cover until it stops. 4. If the document is jammed under the feeder guide, grasp the tab inside the scanner to open the feeder
  • Canon DR 7090C | Reference Guide - Page 44
    feeds jammed paper into the document eject tray. After feeding the paper, raise the document feeder tray and remove the paper. 6. Close the feeder guide. CAUTION Take care to avoid pinching your fingers when closing the feeder cover. 8. Open the feeder. CAUTION Take care to avoid pinching your
  • Canon DR 7090C | Reference Guide - Page 45
    to check: Is the document size or thickness outside 2 the range supported by the feeder, or is the document paper of substandard quality? clean them. (See p. 46.) If the rollers are worn, contact your service representative to have them replaced. CAUTION Lower the feeder slowly, taking care
  • Canon DR 7090C | Reference Guide - Page 46
    7. About the User Modes You can configure the scanner settings with the user modes described below. User Mode Functions User mode functions are as follows: ■ Count Only Mode Co u n t On l y Mo d e ON [ OFF ] ON: Counts the number of pages in a document using stand-alone scanner operations. OFF
  • Canon DR 7090C | Reference Guide - Page 47
    10: 10 Mbyte/sec (First SCSI) 5: 5 Mbyte/sec (non-synchronous) If the scanner does not operate correctly when the output speed is set to '20' Mbyte/sec, reduce the transfer speed to '10' Mbyte/sec or '5' Mbyte/sec. How to Set the User Modes Use the following procedure to configure user mode
  • Canon DR 7090C | Reference Guide - Page 48
  • Canon DR 7090C | Reference Guide - Page 49
    Chapter 3 Maintenance 1. Changing the Stamp Cartridge 42 2. Daily Cleaning 44 About the Cleaning Cloth and Cleaning Paper ...... 44 Cleaning the Main Unit 44 Cleaning the Flatbed (Platen Glass) and Pressure Board 45 Cleaning the Feeder 46 Cleaning the Power Plug 52
  • Canon DR 7090C | Reference Guide - Page 50
    stamp mark becomes smudged or faint. Contact your sales reprentative or service representative to purchase a new stamp cartridge. 1. Open the Open the feeder guide, and then open the inner cover. The feeder guide has a green tab, while the inner cover located under the feeder guide has a light
  • Canon DR 7090C | Reference Guide - Page 51
    5. Close the feeder guide and inner cover. CAUTION Take care to avoid pinching your fingers when closing the feeder guide and inner cover. 6. Close the feeder cover. CAUTION Take care to avoid pinching your fingers when closing the feeder cover. 3 43 Maintenance
  • Canon DR 7090C | Reference Guide - Page 52
    2. Daily Cleaning To maintain high-quality scanning, you should periodically clean the following: • Main unit • Flatbed (Platen glass) • Pressure Board • Feeder CAUTION • Before you clean the scanner, turn OFF the scanner and computer and disconnect the power cord from the power outlet. Otherwise,
  • Canon DR 7090C | Reference Guide - Page 53
    Cleaning the Flatbed (Platen Glass) and Pressure Board A dirty flatbed (platen glass) or pressure board can cause soiling of scanned images, or document size detection errors. Clean the flatbed (platen glass) and pressure board periodically. 1. Open the feeder. 2. Wipe the flatbed (platen glass),
  • Canon DR 7090C | Reference Guide - Page 54
    3. Slowly and carefully close the feeder. Cleaning the Feeder Without periodic cleaning, a problem may be caused on the scanned image or the document may become soiled. Clean the feeder periodically. 1. Open the feeder cover. Operate the opening lever,
  • Canon DR 7090C | Reference Guide - Page 55
    out. Next, wipe the rollers dry with a soft, dry cloth. 3 Maintenance 4. Grasp the tab in the front to open the feeder guide. 6. Wipe the four rollers inside the feeder guide with a cloth moistened with plain water and thoroughly wrung out. Next, wipe the rollers dry with a soft, dry cloth. 47
  • Canon DR 7090C | Reference Guide - Page 56
    . 9. Open the feeder. CAUTION Take care to avoid pinching your fingers when closing the feeder guide. 8. Close the feeder cover. 10. Wipe the feeder roller (white) and platen roller (black) with a cloth moistened with plain water and thoroughly wrung out. Next,
  • Canon DR 7090C | Reference Guide - Page 57
    IMPORTANT When you open the feeder cover and turn the dial located in the front, the platen roller rotates. When cleaning the platen roller, rotate the roller slowly while wiping it. 12. Remove the scanning area cleaning tool from inside the cover. 3 Maintenance Dial 11. Pull the lever on the
  • Canon DR 7090C | Reference Guide - Page 58
    14. Attach the cleaning paper to the scanning area cleaning tool. 16. Wipe the platen roller located behind the inner cover with a cloth moistened with plain water and thoroughly wrung out. Next, wipe the roller with a soft, dry cloth. IMPORTANT When cleaning the platen roller, rotate the roller
  • Canon DR 7090C | Reference Guide - Page 59
    18. Close the inner cover. 20. Close the cover for the feeder's scanning area. 3 CAUTION Take care to avoid pinching your fingers when closing the cover. 19. Remove the cleaning paper from the scanning area cleaning tool, and place the cleaning tool inside the cover. CAUTION Take care to avoid
  • Canon DR 7090C | Reference Guide - Page 60
    22. Slowly and carefully lower the feeder back down. Cleaning the Power Plug If you leave the power plug connected to the power outlet for a long period of time, dust may accumulate at the power outlet, and cause a fire or electrical shock. Clean the power plug periodically. CAUTION Lower the
  • Canon DR 7090C | Reference Guide - Page 61
    Chapter 4 Practical Examples 1. Messages 54 Status Display 54 Error Messages 55 2. Troubleshooting 57 Trouble Categories 57 Problem and Solution 57
  • Canon DR 7090C | Reference Guide - Page 62
    1. Messages There are two types of display panel messages: "status indicator messages" and "error messages" that appear when the scanner encounters a problem. Status Display The following messages appear on the display panel to indicate the scanner's operating state: ■ Count Only Mode Co u n t On
  • Canon DR 7090C | Reference Guide - Page 63
    details, see Chapter 9 "Job Registration Tool Settings" in the User Manual. Error Code: C001 Cause: The feeder is open. Solution: Close document mode to ON in the scanner settings to prevent this message from appearing. ■ Call for Service Practical Examples Ca l l f o r Se r v i ce Ex x x x x
  • Canon DR 7090C | Reference Guide - Page 64
    Internal scanner error. Solution: Turn the power OFF, and restart the scanner. If this does not solve the problem, make a note of the error code and contact your Canon service representative. ■ Single-Pass OFF S i n g l e - Pa s s OFF Cause: This appears when the scanner is restarted after the "Call
  • Canon DR 7090C | Reference Guide - Page 65
    2. Troubleshooting This section describes the problems that may occur during use of the scanner and how to solve them. Trouble Categories Problem and Solution The following trouble categories are addressed: • The Scanner Does Not Turn ON (See p. 57) • The "Wait" Message Does Not Disappear (See p.
  • Canon DR 7090C | Reference Guide - Page 66
    your local authorized Canon dealer or service representative for more information. Cause The scanner does not support the USB cable. Solution Use not be properly recognized by the PC. If this does not solve the problem, consider the following possible causes: Cause The SCSI card is not compatible
  • Canon DR 7090C | Reference Guide - Page 67
    the PC's USB interface support only Full-Speed USB 1.1? ✔ Is the USB cable you are using the one that was supplied with the scanner (Hi-Speed USB 2.0 compliant)? ✔ Is a USB 1.1-compliant device connected to the USB hub at the same time? If this does not solve the problem, consider the following
  • Canon DR 7090C | Reference Guide - Page 68
    dealer or service representative. If this does not solve the problem, consider the following possible problems and causes: Problem Cause driver settings may be incorrect, or your application may not support certain scanner functions. Problem Cause Solution The scanned image is too dark (or faint
  • Canon DR 7090C | Reference Guide - Page 69
    Slide the document guides to match the width of your document. Problem Cause Solution or service representative. Problem Cause Problem The scanned image is abnormal in some applications. Cause A function not supported by the application was used. 4 Solution Some applications do not support
  • Canon DR 7090C | Reference Guide - Page 70
    Job Registration Tool. Register the job using Job Registration Tool. For details, refer to Chapter 9 "Job Registration Tool Settings" in the User Manual. Problem Cause Solution The Job function does not operate after selecting the job and pressing the Start key. The Windows Events function is not
  • Canon DR 7090C | Reference Guide - Page 71
    Chapter 5 Appendix 1. Specifications 64 Specifications for the Scanner 64 Options 65 Consumables 65 External Dimensions 66 2. Index 67
  • Canon DR 7090C | Reference Guide - Page 72
    1. Specifications Specifications for the Scanner Type Desktop ADF/flatbed scanner Document Size Width: 5.5" to 11.7" (139.7 mm to 298.1 mm) Length: 5.0" to 17.0" (128 mm to 431.8 mm) (Normal Mode) 5.0" to 24.8" (128 mm to 630 mm) (Long Document Mode) Document Thickness Black-and-white Documents •
  • Canon DR 7090C | Reference Guide - Page 73
    °C) Humidity: 25% to 80% RH • You can use the functions noted above if the software supports them. • They may not work depending on your computer's capabilities and the software you are using. options and consumables, contact your sales representative or your service representative. 5 65 Appendix
  • Canon DR 7090C | Reference Guide - Page 74
    External Dimensions 23.7" (602 mm) (16.4" (714 mm)) 24.3" (618 mm) 12.5" (317 mm) 12.4" (314 mm) 5.9" (150 mm) 14.8" (377 mm) 23.1" (586 mm) 1.3" (32 mm) 66
  • Canon DR 7090C | Reference Guide - Page 75
    Glass 45 Job Keys 13 Job Mode 26 Power Plug 52 Job Registration Tool 25 Cleaning tool 50 Consumables 65 Count Only Mode 38 D M Manuals for the Scanner v Menu Key 13 Moving the Scanner 4 Daily Cleaning 44 N DIP Switches 12 Names and Functions of Parts 11 Display Contrast 38
  • Canon DR 7090C | Reference Guide - Page 76
    Set Keys 13 Single-Pass Duplex 39 Slide Guide 11 Specifications 64 Stamp Cartridge 42 Stamp Unit 14 Standard Feeding 22 Stand-by Mode 38 Start Key 13 Stop Key 13 T Transportation Screw 2 U USB Connector 12 User Mode Functions 38 How to Set 39 68
  • Canon DR 7090C | Reference Guide - Page 77
    CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Please read this manual before using the scanner.
After you finish reading this manual, keep it in a safe place
for future reference.
Reference Guide