Canon EOS-1Ds Mark III Digital Photo Professional 3.2 Instruction Manual Macin - Page 56

Additional information O Some noise appeared in the periphery of an image after correcting [Peripheral illumination] After correcting [Peripheral illumination], some noise may appear in the periphery of an image. If this occurs, you can reduce the noise by using luminance and/or chromatic noise reduction of the noise reduction function (p.52). O The image appears with less resolution after correcting [Distortion] After correcting [Distortion], the image may appear with less resolution. If this occurs, you can make the image similar to the one before correction by applying more sharpness with sharpness adjusting function (p.27). O The colors of the image became weaker after correcting [Color blur] After correcting [Color blur], the colors of the image may become weaker. If this occurs, you can make the image similar to the one before correction by making the color deeper with adjusting color tone (p.25) and/or color saturation (p.82) functions. O The result of [Color blur] correction cannot be detected [Color blur] correction is effective for correcting blue or red color blur which sometimes occurs at the edge of the highlighted area of an image. If conditions do not match, correction cannot be made. Correct multiple images at a time Select multiple images to correct in the main window. Display tool palette by selecting [Display] menu ` [Tool palette]. If you perform correction procedures (p.54) when tool palette is displayed, you can apply the same corrections to all the images selected in the main window. Also, you can apply same corrections by copying the recipe of the corrected image and paste it to the multiple images (p.33). The periphery of the image may be truncated when [Distortion] correction is made. About [Shooting distance information] slider O When correcting RAW images taken with the EOS-1Ds Mark III, EOS-1D Mark III or EOS 40D, it is set automatically according to the shooting distance information saved to the image. However, if EF 50mm f/1.4 USM, EF 85mm f/1.2L USM or EF 28-70mm f/2.8L USM is used, it is set automatically to the right end at infinity position. You can then minutely adjust the distance by operating the slider while looking at the screen if the shooting distance is not infinite. O When correcting RAW images taken with other than the EOS-1Ds Mark III, EOS-1D Mark III or EOS 40D, it is set automatically to the right end at infinity position. You can then minutely adjust the distance by operating the slider while looking at the screen if the shooting distance is not infinite. O [Shooting distance information] slider is applied to all the correction items with check marks. O For a list of the [Lens aberration correction] window functions, refer to p.105. Introduction Contents at a Glance 1Basic Operation 2Advanced Operation 3Advanced Image Editing and Printing 4 Processing Large Numbers of Images 5 Editing JPEG Images Reference Index 55