Canon EOS 5D Mark II Instruction Manual - Page 13
Installing the Zoom Clamp & Gear Sleeve On Type 2 Lenses - body
UPC - 013803105384
View all Canon EOS 5D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing the Zoom Clamp & Gear Sleeve On Type 2 Lenses Due to the larger diameter lens opening on Type 2 lenses, the Zoom Clamp and Gear Sleeve need to be installed from the rear (bayonet end) of the lens. Use the housing Lens Release Control and remove the camera lens from the camera body, after the camera and lens have been installed in the housing. Place the Gear Sleeve in the housing opening as shown. Install the black Zoom Clamp on the Lens Zoom Ring and lower the lens into the housing opening. Make sure the Zoom Clamp grooved tabs align with the Gear Sleeve ribs. If necessary, install rubber strips to expand the Zoom Clamp so it meshes properly with the Gear Sleeve. Bayonet lens into camera body and align Gear Sleeve teeth with Black Housing Gear Teeth. Type 2 lens Lens Zoom Ring Zoom Clamp Gear Sleeve TOP OF HOUSING Lens Manual Focus Ring Align Zoom Clamp grooved tabs with Gear Sleeve Ribs 13