Canon EOS C500 PL Instruction Manual - Page 58
Canon Log Gamma and CINEMA Preset, Checking Clips Recorded with Canon Log Gamma (View Assistance)
View all Canon EOS C500 PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Recording Video Canon Log Gamma and CINEMA Preset The Canon Log gamma setting makes full use of the newly developed image sensor to offer spectacular dynamic range. 58 You can easily set the camcorder to use a number of preset picture- related settings especially designed with professional cinematography and motion picture production in mind. With the CINEMA preset settings, the gamma and color matrix (A 117) will be set to the advanced Canon Log setting, which makes full use of the newly developed image sensor to offer spectacular dynamic range. On the other hand, other custom picture settings will not be available. [~ Camera Setup] [/ CINEMA Locked] [On] System priority 4K 2K MXF Output terminal/ Recording destination 3G-SDI terminals MON. terminals CF card CF card [/ CINEMA Locked] setting - - [On] [Off] [On] [Off] Picture setting Canon Log gamma Canon Log gamma with or without a LUT applied CINEMA preset settings with Canon Log gamma Based on custom picture settings CINEMA preset settings with Canon Log gamma Based on custom picture settings Clips recorded using Canon Log gamma need to be processed in post-production. During post-production, you can apply a LUT (lookup table) to clips recorded using Canon Log gamma to view the clips with more natural colors. For details about available LUTs, visit your local Canon Web site. * You can also apply a LUT to the MON. terminal or HD/SD SDI terminal output. Setting CINEMA Preset 1 Open the [/ CINEMA Locked] submenu. [~ Camera Setup] > [/ CINEMA Locked] 2 Select [On] and then press SET. • All picture-related settings will be set according to the CINEMA preset values. As such, you will not be able to adjust custom picture settings. • [/ LOCKED] appears on the left of the screen. Checking Clips Recorded with Canon Log Gamma (View Assistance) When Canon Log gamma is used, the image displayed on the screen will appear darker than usual. When you are shooting with Canon Log gamma and are checking the picture on an external monitor connected to a MON. terminal or the HD/SD SDI you can apply a LUT to the output (A 146). In addition, you can use the view assistance function to display an image that approximates the one that would be obtained using normal gamma settings. View assistance is only applied on the camera screen; it will not affect your recordings or the video signal output from the various terminals. 1 Open the [View Assist.] submenu. [£ LCD/VF Setup] > [View Assist.] 2 Select [On] and then press SET. • O will appear on the lower left of the screen. [£ LCD/VF Setup] [View Assist.] [Off] NOTES • If you set an assignable button to [View Assist.] (A 111), you can press the button to enable the view assistance function.