Canon EOS Digital Rebel EOS Utility for Macintosh Instruction Manual (for EOS - Page 9
Connecting the 1Ds, 1D and a Computer, Connect the cable's plug to the FireWire IEEE1394
View all Canon EOS Digital Rebel manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Connecting the 1Ds, 1D and a Computer Connect the camera and computer with the FireWire (IEEE1394) interface cable (IFC-450D6) provided with your camera. 1 Connect the cable's plug to the FireWire (IEEE1394) port on the computer. O Both plugs of the cable are the same, so connect either plug. O For the location and direction of the FireWire (IEEE1394) port, refer to the computer User's Manual. 2 Connect the cable's plug to the camera's < terminal. > When connecting the interface cable plug to the computer and camera, make sure you match the shape of the plug with the shape of the FireWire (IEEE1394) port before connecting. The camera or computer may become damaged if connected incorrectly. If your computer has a 4-pin type FireWire (IEEE1394) port, you will need to use a 4-pin - 6-pin type Canon interface cable (sold separately). Introduction Contents at a Glance 1 Downloading Images 2Camera Settings 3Remote Shooting 4 Preferences Reference Index O Connect with the < > mark on the plug facing the back of the camera. O Both plugs of the cable are the same, so connect either plug. O Image downloading preparation is now complete. Continue with "Starting up EU" (p.9). 8