Canon EOS Elan Instruction Manual - Page 36
Imprinting the Date or Time, Setting the Date and Time, Replacing the Date Battery
View all Canon EOS Elan manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Imprinting the Date or Time (DATE Model only) Setting the Date and Time 1 Select the date or time display. • Press the button. 2 Select the digit to be set. • Press the button until the digit blinks. sEach time you press the button, the settable digit will change as follows: Year → month → day. Or hour → minute →"a" 3 Set the correct number. • Keep pressing the button until the correct number appears. • Repeat steps 2 and 3 until all the date and time digits are set correctly. 4 Finalize the setting. • Keep pressing the button until no digits blink. • If "a" is blinking and you press , the seconds will be reset to 0. Replacing the Date Battery When the date/time on the imprinted photograph looks faded, replace the CR2025 lithium battery as follows. Battery life is about 3 years. 1 Remove the battery chamber cover. • Open the camera back and loosen the screw as shown in the illustration. 2 Take out the battery. 3 Insert a new battery. • The battery's positive contact (+) must face up. 4 Reattach the battery chamber cover. • Set the correct date and time. 36