Canon EOS Rebel T6i EF-S 18-55mm IS STM Lens Kit Instruction Manual - Page 161

3 Auto Exposure BracketingK Canceling AEB  Follow steps 1 and 2 to turn off the AEB range display (set to 0).  The AEB setting will also be canceled automatically if the power switch is set to , flash recycling is completed, etc. Shooting Tips  Using AEB with continuous shooting If the drive mode is set to or (p.112) and you press the shutter button completely, the three bracketed shots will be taken continuously in this sequence: standard exposure, decreased exposure, and increased exposure. The shooting will then stop automatically.  Using AEB with single shooting (u/B) Press the shutter button three times to take the three bracketed shots. The three bracketed shots will be taken in the following sequence: standard exposure, decreased exposure, and increased exposure.  Using AEB with the self-timer or a remote controller (sold separately) With the self-timer or a remote control shooting ( or ), you can take three continuous shots after a 10-sec. or 2-sec. delay. With (p.114) set, the number of continuous shots will be three times the number set.  During AEB, in the viewfinder and AEB range will blink.  AEB cannot be used with flash, [Multi Shot Noise Reduction], Creative filters, or bulb exposures.  If [z2: Auto Lighting Optimizer] (p.136) is set to any setting other than [Disable], the effect of AEB may be reduced. 161