Canon FS100 FS10/FS11/FS100 Instruction Manual - Page 83
Recording, Playback, Reviewing the last scene recorded takes longer than usual.
UPC - 013803092530
View all Canon FS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Recording Pressing Start/Stop will not start recording. - You cannot record while the camcorder is writing previous recording onto the memory (while the ACCESS indicator is on or flashing). - The memory is full or it already contains 999 scenes (the maximum number of scenes). Delete some recordings ( 41, 58) or initialize the memory ( 30) to free some space. The point where Start/Stop was pressed does not match the beginning/end of the recording. - There is a slight interval between pressing Start/Stop and the actual start of recording. This is not a malfunction. The camcorder will not focus. - Autofocus does not work on the subject. Focus manually ( 46). - Lens is dirty. Clean the lens with a soft lens-cleaning cloth ( 96). Never use tissue paper to clean the lens. A vertical light bar appears on the screen. - Bright light in a dark scene may cause a vertical light bar (smear) to appear. This is not a malfunction. Changing the operating mode between recording ( )/record pause ( )/playback ( ) takes longer than usual. - When the memory contains a large number of scenes, some operations may take longer than usual. Back up your recordings ( 68) and initialize the memory ( 30). Reviewing the last scene recorded takes longer than usual. - This may occur as movies and still images are recorded/deleted over time. Back up your recordings ( 68) and initialize the memory ( 30). Movies or still images cannot be recorded properly. - This may occur as movies and still images are recorded/deleted over time. Back up your recordings ( 68) and initialize the memory ( 30). Playback Cannot add scenes to the playlist. - The playlist cannot contain more than 99 scenes or 100 hours of scenes. - You may not be able to add scenes to the playlist if they were recorded or edited using another device. Cannot delete a scene. - You may not be able to delete scenes recorded or edited using another device. Deleting scenes takes longer than usual. - When the memory contains a large number of scenes, some operations may take longer than usual. Back up your recordings ( 68) and initialize the memory ( 30). Cannot erase a still image - The still image is protected. Remove the protection ( 60). 83