Canon HF11 VIXIA HF11 Instruction Manual - Page 102
Indicators and Onscreen Displays, Picture and Sound
UPC - 013803096798
View all Canon HF11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Additional Information Deleting scenes takes longer than usual. - When the memory contains a large number of scenes, some operations may take longer than usual. Back up your recordings ( 83) and initialize the memory ( 33). Cannot erase a still image. - The still image is protected. Remove the protection ( 71). Indicators and Onscreen Displays lights up in red. - Battery pack is exhausted. Replace or charge the battery pack ( 20). appears on the screen. - The camcorder cannot communicate with the battery pack attached so the remaining battery time cannot be displayed. lights up in red. - A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the memory card ( 33) if the display does not change back to normal. - The memory card is full. Replace the memory card or delete some recordings to free some space on the memory card. flashes in red on the screen. - The camcorder has malfunctioned. Consult a Canon Service Center. The CHG (charge) indicator flashes rapidly. - (one flash at 0.5-second intervals) Charging has stopped because the compact power adapter or the battery pack is faulty. Consult a Canon Service Center. The CHG (charge) indicator flashes very slowly. - (one flash at 2-second intervals) The battery pack is too hot. The charging will start once the battery pack temperature is below 40 °C (104 °F). - Charge the battery pack in temperatures between 0 °C and 40 °C (32 °F and 104 °F). - The battery pack is damaged. Use a different battery pack. The CHG (charge) indicator does not turn on even though a battery pack is attached. - The camcorder cannot communicate with the battery pack attached. Such battery packs cannot be charged using this camcorder. Picture and Sound Screen displays turn on and off repeatedly. - The battery pack is exhausted. Replace or charge the battery pack ( 20). - Remove the battery pack and reattach it correctly. Abnormal characters appear on the screen and the camcorder does not operate properly. - Disconnect the power source and reconnect it after a short time. If the problem still persists, disconnect the power source and press the RESET button with a pointed item. Pressing the RESET button resets all settings. 102