Canon HF200 VIXIA HF20/HF200 Instruction Manual - Page 144
Control for HDMI], Photo Numbering], Firmware]
UPC - 013803109689
View all Canon HF200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
[Control for HDMI]: Activates the HDMI-CEC (Consumer Electronics Con- trol) function. When you connect the camcorder to an HDTV compatible with HDMI-CEC using an HDMI cable, you can control the camcorder's playback using the remote control of the TV. • If set to [ On], when the camcorder is connected to a compatible HDTV using an HDMI cable, the video input on the TV will automatically be set to the camcorder's video input. Then, you can use the up/down/ left/right buttons and the OK or SET button on the TV's remote control to play back your recordings. • Depending on the TV set, additional settings may be required on the TV itself to activate the HDMI-CEC function. Refer to the TV's instruction manual. • Correct operation of the HDMI-CEC function cannot be guaranteed even when connecting the camcorder to compatible TV sets. If you cannot use the remote control of the TV, set [Control for HDMI] to [ Off] and operate the camcorder directly or use the camcorder's wireless controller. • The remote control of the TV can only be used to play back movies or photos ( or mode only). If the camcorder is connected to the TV while it is set to a recording mode, depending on the TV used, turn- ing off the TV will automatically turn off the camcorder even if it is recording at the time. [Photo Numbering]: Select the photo numbering method to be used on a new memory card. Photos are automatically assigned consecutive numbers from 0101 to 9900, and stored in folders containing up to 100 photos. Folders are numbered from 101 to 998. [ Reset]: Photo numbers will restart from 101-0101 every time you insert a new memory card. [ Continuous]: Photo numbers will continue from the number following that of the last photo recorded with the camcorder. • If the memory card you insert already contains a photo with a larger number, a new photo will be assigned a number one higher than that of the last photo on the memory card. • We recommend using the [ Continuous] setting. • The photo number indicates the name and location of the file on the memory card. For example, the file name of a photo numbered 1010107 is "IMG_0107.JPG", stored under the folder "DCIM\101CANON". [Firmware]: You can verify the current version of the camcorder's firmware. This menu option is usually unavailable. 144 Additional Information