Canon HFS21 VIXIA HF S20 / HF S21 / HF S200 Instruction Manual
Canon HFS21 Manual
View all Canon HFS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon HFS21 manual content summary:
- Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 1
PUB. DIM-0949-000 HD Camcorder Instruction Manual English Caméscope HD Manuel d'instruction Français Videocámara HD Manual de Instrucciones Español - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 2
REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. HD Camcorder, VIXIA HF S20 A / VIXIA HF S21 A / VIXIA HF S200 A systems This device - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 3
: • Danger of explosion if the wrong type of batteries are attached. Use only the same type of batteries. • Do not expose batteries or product to excessive heat such as the inside of presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. 3 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 4
the word "product" refers to the Canon HD Camcorder VIXIA HF S20 A / VIXIA HF S21 A / VIXIA HF S200 A and all its accessories. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 5
as battery power, refer to instructions in this manual. cords exit the product. 25 Outdoor Antenna Grounding - If CONDUCTORS supporting structure SERVICE EQUIPMENT NEC - NATIONAL ELECTRICAL CODE (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE disconnect the antenna. This will prevent damage to the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 6
can be found at the battery attachment unit of the camcorder. Write down the number and other information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Model Name: VIXIA HF S20 A / VIXIA HF S21 A / VIXIA HF S200 A Date of Purchase: Serial - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 7
United States and/or other countries. • Macintosh and Mac OS are trademarks of Apple Inc., registered in HDMI Licensing LLC. • "AVCHD" and the "AVCHD" logo are trademarks of Panasonic the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 8
video without interruption (0 39). 1 "Full HD 1080" refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels (scanning lines). 2 Video AVCHD is a standard for recording high-definition video. With AVCHD specifications, the video signal is recorded using MPEG - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 9
the best scene mode for the scene you want to shoot. You get spectacular recordings every time without worrying about settings. Video Snapshot (0 69) Just point the camcorder and it will automatically select the best settings for your subject Shoot or capture short scenes and arrange them into - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 10
or upload to the Web. High Definition AVCHD Use the supplied software ImageMixer 3 SE (0 133, 146). MPEG-2 Standard Definition SD-Video Convert your HD movies, in the camcorder itself, to standard definition files (0 140, 146). Standard DVDs 4 AVCHD discs containing scenes recorded in MXP mode - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 11
11 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 12
8 Exciting Features and New Functions 16 About this Manual 18 Getting to Know the Camcorder 18 Supplied Accessories and CD-ROMs 19 Names of Parts Preparations 22 Getting Started 22 Charging the Battery Pack 24 Preparing the Accessories 26 Adjusting the LCD Screen and (b only) Using - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 13
The Index Selection Screen: Selecting the Content to Play Back 55 3D Flip View 56 Narrowing Down the Scenes Shown in the Index Screen 57 Deleting Scenes 59 Advanced Functions 59 Shooting Video in y Manual Mode 60 Selecting the Video Quality (Recording Mode) 61 Special Scene Recording - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 14
, Deleting, Moving and Playing Back 100 Capturing Photos and Video Snapshot Scenes from a Movie 102 Dividing Scenes Photos 104 Basic Playback 104 Viewing Photos 106 Deleting Photos 108 Additional Functions 108 Taking Photos in y Manual Mode 109 Selecting Photo Size and Quality 111 Flash 113 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 15
Icons and Displays 175 Trouble? 175 Troubleshooting 183 List of Messages 194 Do's and Don'ts 194 Handling Precautions 199 Maintenance/Others 200 Using the Camcorder Abroad 201 General Information 201 Accessories 202 Optional Accessories 208 Product Codes 209 Specifications 213 Index Table of - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 16
Manual Thank you for purchasing the Canon VIXIA HF S21 / VIXIA HF S20 / VIXIA HF S200. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (0 175). Conventions Used in this Manual - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 17
a 10-second countdown*. The countdown appears on the screen. mode: Press j, first halfway to activate the autofocus and then fully. The camcorder will record the photo after a 10-second countdown*. The countdown appears on the screen. * 2 seconds when using the wireless controller. NOTES • Once - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 18
* The CD-ROM includes the instruction manual of the software (on PDF file). ** These music files are for exclusive use with the supplied software ImageMixer 3 SE. The disc cannot be played back on CD players. For more details, refer to 'ImageMixer 3 SE Software Guide' (PDF file). 18 Introduction - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 19
(L) (0 83) 2 Speaker (0 51) 3 2 (camera/play) button (0 31) 4 VIDEO SNAP (video snapshot) button (0 69) 5 DISP. (onscreen display) A h Strap mount (0 25) A j USB terminal (0 125, 128) A k HDMI OUT terminal (0 125, 126) A l Grip belt (0 25) S q MIC terminal (0 88) S a Mini video light (0 82) S s Flash - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 20
and mini video light (0 82 25) D d LCD touch screen (0 26, 29) D f POWERED IS button (0 65)/ WEB button (0 146) D g DC IN terminal (0 22) D h Viewfinder* (0 28) D j START/STOP button (0 42, 59) D k Serial number The serial number label is located inside the battery attachment unit. Remove the battery - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 21
Bottom view F q Tripod socket (0 195) F a BATTERY RELEASE switch (0 23) F s Dioptric adjustment lever* (0 28) * b only. Wireless Controller WL- 6 B (stop) button (0 49) 7 PHOTO button (0 42, 108) 8 Zoom buttons (0 46) 9 Navigation buttons ( Z/O/y/A ) A q A/C (play/pause) button (0 49) Introduction - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 22
the compact power adapter. The first time you use a battery pack, fully charge it and then use the camcorder until the battery pack is completely exhausted. Doing so will ensure that the remaining recording time will be displayed accurately. For approximate charging times and recording/playback - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 23
out when you turn off the camcorder. After a moment, the ON/OFF (CHG) indicator will start flashing in red (battery pack charging). The red ON/ OFF (CHG) indicator will go out when the battery pack is fully charged. • If the indicator flashes quickly, refer to Troubleshooting (0 175). To remove the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 24
connect the supplied compact power adapter to voltage converters for overseas travels or special power sources such as those on aircraft and ships, DC-AC inverters, etc. NOTES • The battery pack will be charged only when the camcorder is off. • If remaining battery time is an issue, you can power - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 25
can rotate the LCD panel 180 degrees to use the wireless controller from the front of the camcorder. NOTES • The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight. Grip Belt and Straps Fasten the grip belt. Adjust the grip belt - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 26
90 degrees downward. • You can rotate the panel 180 degrees toward the lens. Rotating the LCD panel 180 degrees can be useful in the following cases: in the picture when recording with the self timer. - To allow the camcorder to be operated with the wireless controller from the front. 180° 180° - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 27
99.99% of the pixels operating to specification. Less than 0.01% of the pixels may on the LCD backlight to make it brighter. With the camcorder on, hold h pressed down for more than 2 seconds brightness of the recordings. • Using the bright setting will shorten the effective usage time of the bat- - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 28
b Using the Viewfinder If it is difficult to use the LCD screen even after turning on the LCD backlight, you can use the viewfinder. You can also use the viewfinder when you rotate the LCD panel 180 ° to let the subject watch the recording. To use the viefinder, hold out both sides of the viewfinder - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 29
a subject that appears on the touch screen to select it and have the camcorder choose the optimal settings. Drag Swipe your finger up and down or left and controls (for example, to adjust the volume). IMPORTANT • The camcorder uses a pressure-sensitive touch screen. Press firmly when using touch - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 30
), Cleaning (0 199). Operating Modes Recording When recording video or photos, the camcorder's operating mode is determined by the position of the camcorder's settings to your preference. Touch [4] to record movies (0 59). Touch [3] to record photos (0 108). * The mode icon displayed will change - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 31
Playback Press the camera/play button S to switch the camcorder between camera (recording) mode and playback mode. The playback mode you switch into depends on the initial recording mode. You can press S when the camcorder is off to turn it on directly in playback mode. Initial mode Press S in or - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 32
Using the Menus Many of the camcorder's functions can be adjusted from the FUNC. panel and the setup menus. In mode, however, menus cannot be accessed and, except in a few cases, most menu settings will return to their default values. For details about the available menu options and settings, - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 33
the options currently selected. You can enlarge the font size by setting 6 8 [Font Size] to [A Large] but only the icons of the currently selected options will appear on the screen. Preparations 33 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 34
camcorder before you can start using it. The [Date/Time] screen will appear automatically when the camcorder's clock is not set. When the [Date/Time] screen appears, the year will be selected. 1 Touch a field the camcorder for about 3 months, the built-in rechargeable lithium battery may discharge - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 35
of the camcorder is English. You can set it to one of 22 other languages. Operating modes: [FUNC.]* 8 [MENU] 8 6 8 [Language a] 8 Desired language 8 [OK] 8 [a] * Only when performing the procedure in a recording mode. NOTES • Some control buttons, such as [ZOOM], [FUNC.] or [MENU], will appear in - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 36
and SD memory cards with this camcorder. How- ever, depending on the data transfer speed of SD/SDHC memory cards. When you buy a new memory card, look for the Speed Class logo 10. Eye-Fi Cards This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 37
can also use two memory cards, one in each memory card slot. • Insert the memory card straight, with the label facing the front of the camcorder, all the way into the memory card slot until it clicks. • To use the wireless communication features of an Eye-Fi card, insert it into - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 38
, based on currently used settings. NOTES • Select to record movies in the built-in memory (c only) or mem- ory card X if you later want to convert the movies to standard definition in order to upload them to the Web or to create standard DVDs. 38 Preparations - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 39
cards (357). Operating modes: 1 Insert a memory card that contains no video recordings into the card slot of the memory card you want to use for slot X. • Any of the following actions will deactivate the relay recording function: - Turning off the camcorder. - Opening the double memory card slot - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 40
them with this camcorder for the files for use as background music during playback. Operating modes: 1 Power the camcorder disconnect the power source or turn off the camcorder until the initialization is completed. 2 Initialize data rather than just clear the file allocation table of the memory. ** - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 41
memory will be restored after it is initialized.) - Windows users: Use the supplied software ImageMixer 3 SE to transfer music files from the supplied Camcorder Supplemental Disc to a memory card after it is initialized. For details, refer to the 'ImageMixer 3 SE Software Guide' (PDF file). - Mac OS - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 42
108). Basic Recording Shooting Video and Taking Photos in Dual Shot Mode Operating modes: 1 Set the mode switch to 5. 2 Turn on the camcorder. • By default, movies and photos are recorded in the built-in memory (c only) or on memory card X (d). You can select the memory that will be used to record - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 43
). - Quick Start (0 47). - Video snapshot (0 69). - Advanced image stabilization modes (0 64) to shoot video while walking or to stabilize the shot mode, the camcorder will automatically detect certain characteristics of the subject, background, lighting conditions, etc. It will then adjust - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 44
AUTO icons Background → (color of the icon) Subject ↓ Bright (grey) Blue skies Vivid colors (light blue) (green/red) People (stationary) ( )( )( ) People (moving) ( )( )( ) Subjects power source or turn off the camcorder. - Do not change the camcorder's operating mode. 44 Dual Shot Mode - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 45
Off] is set to [A On], the camcorder will shut off automatically to save power when it is powered by a battery pack and is left without any operation for yellow. Set the camcorder to mode and adjust the focus manually (0 76). - When the subject is too bright, [Overexp.] will flash on the screen - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 46
zoom in and out: using the zoom lever on the camcorder, using the zoom buttons on the wireless controller or using [Digital Zoom] setting. Using the Zoom Lever or Wireless Controller Move the zoom lever toward Q (wide angle) to zoom out. Move it toward P (telephoto) to zoom in. • By default, the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 47
away from the subject. At full wide angle, you can focus on a will be constant at [J Speed 3]. - The zoom speed will camcorder on, the camcorder enters the standby mode. In standby mode the camcorder consumes only about 1/3 the power used when recording, saving energy when you are using a battery - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 48
is closed while the double memory card slot cover is open or when the battery charge is too low. Check that the ON/OFF (CHG) indicator changes to orange. • About standby mode and auto power off: - The camcorder will power off automatically if left in standby mode for 10 minutes. Press x to turn - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 49
, including playback, advanced shooting, advanced functions and playlist and scene operations. For details about basic video shooting, refer to Dual Shot Mode (0 42). Basic Playback Playing Back the Video Operating modes: 1 Press S. You can also press and hold B on the wireless controller for more - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 50
3 Look for the scene you want to play back. Move the zoom lever toward Q to show 15 scenes per down the scenes shown in the index screen (0 56). * While browsing through index pages, a scroll bar will appear at the bottom of the screen for a few seconds. When you have a large number of scenes it - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 51
4 Touch the desired scene to play it back. • Playback will start from the scene selected and continue until the end of the last scene in the index screen. • Touch the 5x → 15x → 60x the normal speed. During fast playback, touch anywhere on the screen to return to normal playback. Video 51 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 52
's operating mode. • You may not be able to play back with this camcorder movies recorded on a memory card using another device. NOTES • Depending on the recording conditions, you may notice brief stops in video or sound playback between scenes. • During fast/slow playback, you may notice some - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 53
, playlist, or photos, for example). You can also select the memory from which you want to play back your recordings. Operating modes: In any index screen, touch [b]. During single photo view, touch X or memory card Y. B Touch a control button to select the content you want to play back. Video 53 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 54
is selected) Scenes that were converted to standard definition to upload them to the Web (0 146) or to create standard DVD discs (0 140). Touch [SD Scenes] and then [For Web (MPEG-2)] or [For DVD (SD-VIDEO)] as necessary. [Video Snapshot] To display only video snapshot scenes. Touch this control - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 55
View 3D Flip View is a fun way to display your video recordings (original scenes) in a 3D layout, organized by recording left to go to the next date with recordings. C Touch the scene in the front to play it back. D Currently selected recording date. E Drag your finger right to go to the previous - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 56
]. To show all scenes again, touch [y o Faces] and then [All Scenes]. Showing Only Scenes Recorded on a Specific Date This will narrow down the scenes shown in the [Original] or [Video Snapshot] → [Original] index screen, leaving only scenes that were recorded on the date you choose. 1 Open the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 57
(0 99). Operating modes: 1 Open the index screen that contains the scenes you want to delete. • [Original] or [Video Snapshot] → [Original] index screen: To delete all the scenes recorded on a specific date, narrow down the scenes shown to scenes recorded on that date (0 56). 2 Touch [a] to open the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 58
individual scenes you want to delete. • A checkmark O will appear on scenes selected. Touch a selected scene again to slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder's operating mode. NOTES • Deleting a scene from the [Original] index screen - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 59
Functions Shooting Video in y Manual Mode When the mode switch is set to y (Manual mode), you can enjoy full access to the menus and manually adjust the exposure, focus, white balance and many more of the camcorder's settings to your prefer- ence. Even in mode, though, the camcorder can help - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 60
recorded in MXP mode cannot be saved onto AVCHD discs using the optional DW-100 DVD Burner. Use the supplied software ImageMixer 3 SE to back up such scenes. • The camcorder uses a variable bit rate (VBR) to encode video so the actual recording times will vary depending on the content of the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 61
8 GB Memory card 40 min. 1 hr. 1 hr. 2 hr. 3 hr. 25 min. 20 min. 16 GB Memory card 1 hr. 25 min. 2 hr. 5 min. 2 hr. 50 min. 4 hr. 45 min. music files. 3 A single scene can be recorded continuously for 12 hours; at that point, the camcorder will stop recording program 8 [a] Video 61 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 62
Options ( Default value) [FPortrait] The camcorder uses a large aperture, to achieve a sharp focus on the subject while the subject being underexposed. [KSunset] To record sunsets in vibrant colors. [p Low Light] To record in low-light situations. [LSpotlight] To record spotlit scenes. 62 Video - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 63
the screen. • [p Low Light]: - Moving subjects may leave a trailing afterimage. - Picture quality may not be as good case, adjust the focus manually. • [M Fireworks]: - To avoid camcorder blur (blur due to the camcorder moving) we recommend using 24p Cinema Mode. Operating modes: Video 63 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 64
the [z 24F] frame rate cannot be converted to standard definition using the camcorder. If you want to upload your movies to video sharing Web sites, set the frame rate to [E PF24] or convert the movies to standard definition using the supplied software ImageMixer 3 SE. Advanced Image Stabilization - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 65
full wide angle. [Q Standard], [Q On] Compensates for a lower degree of camcorder shake, such as when shooting while remaining stationary, and is suitable for shooting natural-looking scenes. Use this setting when recording movies with the optional Wide-converter or Tele-converter. [j Off - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 66
will start 3 seconds before g was pressed. NOTES • While pre-recording is activated, the camcorder will not emit any notifi- cation sounds. • The camcorder will will deactivate the pre-recording function. - Leaving the camcorder the camcorder's operating mode. - Setting the camcorder to standby - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 67
camcorder automatically detects people's faces and uses this information to select the optimal settings for beautiful videos and photos. Operating modes: POINTS TO CHECK • Select a recording program other than [q Night Scene], [p Low Light the picture, the camcorder will automatically select one - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 68
sure face detection is activated (0 67). 2 Point the camcorder at a moving subject and touch the subject on the touch screen. • A white double frame will appear around the subject and track it as it moves contrast. - Fast moving subjects. - When shooting indoors with insufficient lighting. 68 Video - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 69
pause mode. You can change the length of video snapshot scenes with the 8 8 [Video Snapshot Length] setting. • When the camcorder stops recording, the screen will momentarily turn black as if a camera shutter had released. • In index screens, video snapshot scenes are indicated with the Z mark - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 70
digital effects are available in mode. NOTES • When you apply a fader, not only the picture but also the sound will fade in or out. When you apply an effect, the sound will be recorded normally. • Faders cannot be used when recording video snapshot scenes or when pre-recording is activated. 70 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 71
Manually Setting the Shutter Speed or Aperture [A Programmed AE] is the default AE] Set the shutter speed value. The camcorder automatically sets the appropriate aperture value. [C Aperture-Pri. AE] Set the aperture value. The camcorder automatically sets the appropriate shutter speed. Video 71 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 72
PF24] or [z 24F], the shutter speeds available will be the following: 1/6, 1/12, 1/24, shutter speeds; however, image quality may not be as Recording movies under fluorescent lights: If the screen starts for selec- tion will vary depending on number displayed will flash if the manually adjusting the exposure. - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 73
1/2 1/4 1/8 1/15 1/30 1/60 1/100 1/250 1/500 1/1000 1/2000 Low-light situations Most ordinary conditions Fast moving subjects or shooting from a moving car or train .6 F8.0 F1.8 F2.4 F3.4 F4.8 F6.7 More light y Lens aperture A Less light Shallow y Depth of Field A Deep Video 73 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 74
the exposure manually without activating the Touch AE function. • The manual adjustment dial appears and the adjustment value is set at ±0. • Touch [y] again to return the camcorder to automatic During exposure lock, e and the selected exposure adjustment value will appear on the screen. 74 Video - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 75
(0 89). • If the recording program is changed during exposure lock, the cam- corder will return to automatic exposure. • When shooting subjects with a strong light source behind them, the camcorder automatically corrects for the backlight. You can turn off the automatic backlight correction with the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 76
recordings. Automatic Gain Control (AGC) Limit When recording in dark surroundings, the camcorder will automatically increase the gain to try to get a brighter picture. However, using higher gain values may result in more noticeable video noise. You can select the AGC limit to curb the amount of - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 77
to V. 4 Touch [a] to lock the focus at the selected distance. During manual focus, [MF] will appear on the screen. NOTES • While the optional Wide-converter or Tele-converter is attached, the focusing distance displayed will be incorrect. • This function can also be assigned to the custom key/dial - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 78
can help you achieve correct focus when focusing manually. While peaking is activated, the outlines of subjects below. ** Touch again to turn off the peaking function. • The outlines of subjects correctly in focus will be shown in color. To turn the image to black and while using peaking [5] 8 [On] - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 79
[Set WB]. When the adjustment is completed, g stops flashing and disappears. The camcorder will retain the custom white balance even if you turn it off. Options ( Default value) [Y Automatic] The camcorder automatically sets the white balance for natural looking colors. [a Daylight] To record - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 80
lights • Depending on the type of fluorescent light camcorder by a factor of approx. 1.7 and record the enlarged image at full HD resolution. Operating modes: [FUNC.] 8 [ZOOM] 8 [b]* (digital tele-converter) 8 [a] * Touch again to deactivate the digital tele-converter. • The center of the screen will - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 81
[U], [V] or [W] to set the desired [Color Depth] level. 2 Touch [y] or [A] to select [Sharpness the contrast and color saturation. [X Low Sharpening] Records subjects with softened outlines to adjust the color depth, brightness, contrast, and sharpness of the image. [Color Depth]: (V) Shallower, (U) - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 82
using the optional video light, refer to the instruction manual of the accessory used. NOTES • When an optional video light is attached to the mini advanced shoe, the built-in mini video light will be disabled. To use the built-in mini video light, turn off the optional video light. 82 Video - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 83
camcorder will camcorder. - Changing the camcorder's operating mode. - Setting the camcorder to standby mode. Audio Recording Level You can adjust the audio recording level of the built-in or an external microphone. You can display the audio level indicator while recording. Operating modes: Video - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 84
recording level will appear on the screen. • Touch [z Automatic] to return the camcorder to automatic audio recording levels. Manual audio level audio level indicator Usually, the audio level indicator will be displayed only after activating the manual adjustment of the audio recording level. You - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 85
] when the optional SM-V1 Surround Microphone is attached to the camcorder). • We recommend using headphones to check the sound level while OUT/X terminal, which is used for both the headphones and the audio/video output. Before connecting the headphones, follow the procedure below to change the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 86
a range of optional accessories to expand its functionality. For details about optional accessories available for use with your camcorder, refer to Accessories (0 201). For details about how to attach and use the accessories, refer also to the instruction manual of the accessory used. 86 Video - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 87
is attached to the mini advanced shoe, will appear on the screen. Example: Attaching an optional DM-100 Directional Stereo Microphone. NOTES • Accessories designed for the Advanced Accessory Shoe cannot be used with this camcorder. Look for video accessories bearing this logo to ensure compatibility - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 88
• Playing back recordings made with the optional SM-V1 Surround Microphone: You can enjoy 5.1ch surround sound playback on HDTVs compatible with 5.1ch surround sound connected to the camcorder using an HDMI cable. Audio output from the AV OUT/X terminal (including headphone output) will be converted - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 89
of the functions that can be assigned to the custom key appear in a row. 2 Turn the custom dial to select the desired function and press f. Video 89 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 90
Manual exposure adjustment (0 74). Press f to turn the manual exposure on/off and turn the dial to compensate the exposure. [o Tv manual camcorder to use certain functions while viewing the picture on an external monitor without touching the camcorder. This is particularly useful while the camcorder - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 91
camcorder. For details about using the zoom remote controller, refer to the instruction manual between autofocus and manual focus, Push autofocus temporarily during manual focus. NOTES you may want to start playing back the scene from a segments every time the camcorder registered a change in - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 92
thumbnail will show the first frame of the scene. Below it, the timeline ruler shows frames taken from the scene at fixed intervals. 3 Touch the desired frame in the timeline ruler to start playing back [o Faces]). To change the interval between frames [6 sec] 8 Desired interval 8 [f] 92 Video - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 93
CHECK • To play back scenes or a slideshow of photos recorded on one of the memory cards, you will need to transfer the music tracks to the corresponding memory card in advance. For details, refer to the 'ImageMixer 3 SE Software Guide' (PDF file). 1 Open the [Playlist], [Video Snapshot] → [Original - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 94
[a] * Touch [B Off] to play back the scenes with the sound recorded originally or to play back the photo slideshow without any music. A Select the desired music track. B Play back the original sound (no background touch [Z] or [O] to select the track you want to delete. [d] 8 [Yes] 94 Video - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 95
the camcorder); the other end will depend on external player used). 1 Open the [Playlist], [Video Snapshot] video playback will pause. When the external audio input is restored, video playback will resume automatically. • When you play back the slideshow linked to the external audio, the photos will - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 96
memory will be restored after it is initialized.) - Windows useres: Use the supplied software ImageMixer 3 SE to transfer music files from the supplied Camcorder Supplemental Disc to a memory card after it is initialized. For details, refer to the 'ImageMixer 3 SE Software Guide' (PDF file). - Mac - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 97
that were turned on manually (for example, onscreen markers or the audio level meter). **Touch the screen to display the playback controls. About the Data Code With every scene or photo recorded, the camcorder keeps a data code (date/time of recording, information about the camera setup, etc.). In - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 98
the [Original] or [Video Snapshot] → [Original] index screen. To add to the playlist all the scenes recorded on a specific date, narrow down the will not affect the original recordings. • Scenes that were edited using the supplied software ImageMixer 3 SE and were then written back to the camcorder - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 99
in progress. Some scenes will be deleted nevertheless. Moving Scenes in the Playlist Move the scenes in the playlist to play them back in the order of your choice. 1 Open the [Playlist] index screen. You can touch [b] 8 [Video Snapshot] 8 [Playlist] to open the playlist of video - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 100
the index screen that contains the scene from which you want to capture the video snapshot scene. 2 Play back the desired scene. 3 Press g to capture the video snapshot scene. The camcorder captures the video snapshot scene for about 4 seconds (the blue frame serves as a visual progress bar), and - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 101
software ImageMixer 3 SE and were then written back to the camcorder. • When the source scene is itself a video snapshot scene, you may not be able to capture a video of the captured photos will be [H 1920x1080] and it cannot be changed, but you can select the photo quality. Please read the IMPORTANT - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 102
. 3 Press j fully. To capture a photo sequence, hold j pressed down. The scene will be played back by frames and each frame captured as a separate photo. 4 Touch [B] to return to leave out the best parts and later cut out the rest. Operating modes: 1 Open the [Original] index screen. 102 Video - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 103
pause: Touch [A] to play back the scene. Touch video from the division point to the end of the scene will cut. • The following scenes cannot be divided: - Video snapshot scenes and other scenes that are too short (less than 3 seconds). - Scenes that were edited using the supplied software - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 104
). Basic Playback Viewing Photos Operating modes: 1 Press S. 2 Open the [Photos] index screen, if it is not displayed. [b] 8 [Photos] 3 Look for the photo you want to play back. Move the zoom lever toward Q to show 15 photos per page; move it toward P to show 6 photos per page. 104 Photos - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 105
A Memory being read. B Index screen currently displayed. C Drag your finger left for the next index page. D Drag your finger right for the previous index page. E Select a different index screen to read different content or from a different memory (0 53). 4 Touch the photo you wish to view. • The - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 106
card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder's operating mode. • The following image files may not be displayed correctly. - Images not recorded with this camcorder. - Images edited on or uploaded from a computer. - Images whose - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 107
.) 4 Delete the photos. [Edit] 8 [Delete] 8 [Yes]* 8 [OK] * Touch [Stop] to interrupt the operation while it is in progress. Some photos will be deleted nevertheless. IMPORTANT • Be careful when deleting photos. Deleted photos cannot be recovered. • Protected photos cannot be deleted. Photos 107 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 108
Additional Functions Taking Photos in y Manual Mode Operating modes: 1 Set the mode switch to y. 2 Turn on the camcorder. • By default, photos are recorded in the built-in memory (c only) or on memory card X (d). You can select the memory that will be used to record photos (0 38). • Please read the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 109
yellow. Adjust the focus manually (0 76). • When the subject is too bright, [Overexp.] will flash on the screen. In review time, the photo will continue to be displayed indefinitely. Press j halfway to return to normal shooting mode. Selecting Photo Size and Quality Photos are recorded as JPG files - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 110
The actual number of photos that can be recorded will vary depending on the subject and shooting conditions. • The camcorder retains the last setting used even if you set . - K 3264x1840, H 1920x1080: To print photos with a 16:9 aspect ratio. (Wide-sized photo paper is required.) 110 Photos - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 111
record the photo. Depending on the setting selected and shooting conditions, the flash will pop up and fire. After using the flash, gently press the pop- fires automatically according to the brightness of the subject. The assist lamp lights up to reduce the red-eye effect. [S Flash On] The flash always - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 112
the video flash light (n ON). For details about using the video flash light, refer to the instruction manual of the VFL-2. NOTES • The flash will are too dark, the mini video light may pop up and the assist lamp may light up briefly in order to enable the camcorder to focus more accurately (AF- - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 113
]. [FUNC.] 8 [Drive Mode] 8 Desired option 8 [a] Options ( Default value) [A Single] Records a single photo. [D AE Bracketing] The camcorder records 3 photos using 3 different exposures (dark, normal, light in 1/2 EV steps), allowing you to choose the photo you like the best. [B Continuous], [C Hi - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 114
press j to capture the photo. In mode, the size/quality of photos taken while recording video (simultaneous recording) will be determined by the setting selected with this procedure; the size/quality of photos taken in record pause mode will be determined by the photo size set in mode (0 109 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 115
digital tele-converter (0 80) is activated. • If while recording video, photos are recorded simultaneously at [K 3264x1840] size, you may notice a very brief stop during the play- back of the video at the point where j was pressed. Light Metering Mode The camcorder measures the light reflected - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 116
back the photo slideshow (0 93). Slideshow set to a music track 3 Touch the screen to display the playback controls, then touch [A] to play back the slideshow set to the selected music track. Slideshow not linked to the external audio 3 Touch the screen to display the playback controls, then - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 117
Magnifying Photos during Playback In single photo view, photos can be magnified up to 5 times. R will appear for photos that cannot be enlarged. Operating modes: 1 Move the zoom lever toward P. • The photo is magnified by 2 times and a frame appears indicating the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 118
histogram as a reference to verify the correct exposure of the photo. Operating modes: * Pixel Count * In mode the histogram will be dis- played while a photo is reviewed immedi- ately after having taken the photo. Touch the screen to display the playback controls. The histogram and Exif - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 119
1 Open the [Photos] index screen. 2 Touch [a] to open the photo selection screen. 3 Touch on the individual photos you want to protect. • A checkmark O will appear on photos selected. Touch a selected photo again to remove the checkmark. • To select all the photos at once: Touch [Select All] instead - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 120
... The following functions and features of the camcorder can be used either for shooting video or for taking photos. The way to effects (0 70) • Manual exposure adjustment (0 74) • Manual focus adjustment (0 76) • White balance (0 79) • Image effects (0 81) • Mini video light (0 82) • Self timer - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 121
want to print and set the desired number of copies as a print order (0 123). Canon printers: SELPHY printers of the CP, DS and ES series and PIXMA printers carrying the PictBridge logo. Operating modes: Connecting the Camcorder to the Printer 1 In single photo view, select a photo you want to print - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 122
printer's instruction manual. When you have finished printing Disconnect the USB cable from the camcorder and printer and turn off the camcorder. Print errors If an error occurs while printing, an error message (for example, [No paper]) will appear on the camcorder's screen. Solve the problem refer - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 123
instruction manual. • Canon's PictBridge-compatible printers: If printing does not resume auto- matically after you solved the problem Canon printer: If printing does not resume automatically, disconnect the USB cable and turn off the camcorder. After a short while, turn on the camcorder -serviced - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 124
card X or Y). 2 Touch [a] to open the photo selection screen. 3 Touch on the individual photos you want to mark with a print order. • A checkmark O will appear on photos selected. Touch a selected photo again to remove the checkmark. • To select all the photos at once: Touch [Select All] instead of - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 125
the LCD panel and terminal cover. Sound from the built-in speaker will be muted while the STV-250N Stereo Video Cable is connected to the camcorder. Adjust the volume on the connected TV. * When connecting a cable to the camcorder, make sure to align the cable so the triangle mark on the connector - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 126
device. Connection A HDMI Type: Digital Quality: High definition Output only Connect to a high-definition TV (HDTV) with an HDMI input terminal. as this may damage the camcorder. - While the camcorder is connected to an HDTV using connection A, there will be no video output from other terminals. - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 127
Cable (supplied) White Red Connection C Composite Video Type: Analog Quality: Standard definition Output only Connect to a standard TV or a VCR with audio/video input terminals. Change the following settings on the camcorder: - y 8 [TV Type] according to the TV set (widescreen or 4:3), if the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 128
files from the computer to the camcorder, power the camcorder TV. 3 Turn on the connected TV. On the TV, select as the video input the same terminal to which you connected the camcorder. Refer to the instruction manual of the connected TV. 4 Turn on the camcorder and set it to or mode. Play - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 129
the TV's instruction manual. • We recommend powering the camcorder using the compact power adapter. • Connection C: When you play back your 16:9 movies on standard TV sets with a 4:3 aspect ratio, the TV set will switch automatically to widescreen mode if it is compatible with the Video ID-1 system - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 130
or from memory card X to memory card Y. Scenes and photos will be copied from the index screen you selected to the corresponding index memory card X. • [Original] or [Video Snapshot] → [Original] index screen: To copy all the scenes recorded on a specific date, narrow down the scenes shown to - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 131
4 Copy the scenes. [Edit] 8 [Copy (f97)] (c only) or [Copy (497)] 8 [Yes]* 8 [OK] * Touch [Stop] to interrupt the operation while it is in progress. Copying a Single Photo Operating modes: 1 In single photo view, select the photo you want to copy. Check that you are viewing photos recorded in the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 132
an Eye-Fi card (0 150). NOTES • In the following cases, you will not be able to copy recordings to the memory card: - If the double slot Y. • Scenes that were edited using the supplied software ImageMixer 3 SE and were then written back to the camcorder cannot be copied to the memory card. • If - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 133
sections in the 'Photo Application' Instruction Manual (r PDF file) in the [MANUALS_ENGLISH] folder on the supplied Camcorder Supplemental Disc. Install the supplied Photo Application software following the instructions in the software's instruction manual. r Refer to Installing Photo Application - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 134
result in permanent data loss. Always save your movies on the computer, and restore files to the camcorder, using only the supplied software ImageMixer 3 SE. • Operation may not work correctly depending on the software and the specifications/settings of your computer. • If you wish to use the image - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 135
restoring to the camcorder video files that were previously saved to the computer, do not disconnect the USB cable or turn off the camcorder or computer. Doing so may result in scenes that cannot be played back on the camcorder. NOTES • Refer also to the computer's instruction manual. • Users of - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 136
instruction manual of the DW-100. Operating modes: Preparations on the Camcorder 1 Power the camcorder using the compact power adapter. 2 Open the [Original], [Playlist] or [Video Snapshot] → [Original]/ [Playlist] index screen. AVCHD playlist of video snapshot scenes), the disc will contain the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 137
discs After a disc is finalized, it will be ejected automatically and a message will appear. Insert the next disc AVCHD discs created with the optional DW-100 DVD Burner cannot contain scenes recorded in MXP mode. Use the supplied software ImageMixer 3 SE to save such scenes. • While the camcorder - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 138
will take approximately 3 minutes to complete the connection.) Playing back AVCHD discs created with the DW-100 DVD Burner DW-100 AVCHD camcorder also to play back high-definition (AVCHD) discs on a TV. This is very convenient, for example to play back your discs even in a location where an AVCHD - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 139
memory card slot cover and do not remove the memory cards. NOTES • Only AVCHD discs created with the DW-100 DVD Burner can be played back using the DVD Burner. • The camcorder's menus cannot be accessed while the camcorder is connected to the DVD Burner. • With the exception of fast playback at - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 140
See 'ImageMixer 3 SE Software Guide' (PDF file). Even without a computer, you can convert your video recordings into standard definition scenes and create DVDs using the optional DW-100 DVD Burner. Refer to this section along with the relevant sections in the instruction manual of the DW-100 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 141
[f] 8 [f] To select the bit rate Using a higher bit rate will result in better video quality for the converted scenes. [5] 8 [Bit Rate (Quality)] 8 Desired option 8 [f] 8 [f] NOTES • When converting scenes in the [Playlist] or [Video Snapshot] → [Original]/ [Playlist] index screen: - The scenes are - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 142
automatically and the startup screen (ImageMixer 3 Launcher) will appear. 4 Click [Disc writing] and continue the operation on the computer following the software's indications. See also 'ImageMixer 3 SE Software Guide' (PDF file). IMPORTANT • While the camcorder is connected to the computer, do not - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 143
. The procedure is the same as that for burning AVCHD discs (0 136). To play back standard-definition DVDs Standard-definition DVDs are created using DVD-Video specifications. Play back these DVDs using standard DVD players. NOTES • When the camcorder contains a large number of scenes to be saved on - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 144
in the instruction manual of the DW-100. Operating modes: 1 Power the camcorder using the compact power adapter. 2 Open the [Photos] index screen. 3 Connect the camcorder to the DW-100 DVD Burner and create the disc. The procedure is the same as that for burning AVCHD discs (0 136). To play back - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 145
used so be sure to refer to the instruction manual of the digital video recorder. In Standard Definition You can copy your movies by connecting the camcorder to a VCR or a digital video recorder with analog audio/video inputs. Video output will be in standard definition, although the original scenes - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 146
definition in the camcorder and then use the supplied software ImageMixer 3 SE to upload your videos to the Web. Installation See 'PIXELA Applications' Installation Guide. Using the software See 'ImageMixer 3 SE Software Guide' (PDF file). Operating modes: Converting Scenes into Standard Definition - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 147
tab to convert scenes from memory card X. • [Original] or [Video Snapshot] → [Original] index screen: To convert all the scenes recorded on a specific date, confirmation screen will appear. Connect the camcorder to the computer at this point (0 149) to continue uploading the converted videos to the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 148
better video quality for the converted scenes, while a lower bit rate will result in smaller file sizes and faster uploads. [5] 8 [Bit Rate (Quality)] 8 Desired option 8 [f] 8 [f] To convert only part of a scene Instead of steps 4 and 5 above, touch on the scene you want to convert to start playing - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 149
[SD Scenes] 8 [For Web (MPEG-2)] 3 Connect the camcorder to the computer using the supplied USB will appear. 4 Click [Web upload] and continue the operation on the computer following the software's indications. See also 'ImageMixer 3 SE Software Guide' (PDF file). IMPORTANT • While the camcorder - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 150
the [For Web Upload] index screen to your favorite video sharing Web site. You will need to have installed the software supplied with your Eye-Fi card and completed all the required configuration setup in advance. Refer to the instruction manual of the Eye-Fi card. Please read the IMPORTANT section - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 151
upload may fail and the video files will be registered as incomplete uploads. • About power saving: - Wireless communication drains the power of the battery pack faster than usual. We recommend powering the camcorder using the compact power adapter. - While files are being uploaded wirelessly, the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 152
Additional Information This chapter contains troubleshooting advice, screen messages, handling and [p Low Light], [L Spotlight], [M Fireworks] [Y Automatic], [a Daylight], [b Shade], [c Cloudy], [e Fluorescent], [f Fluorescent H], [d Tungsten], [g Custom WB] z z 79 [z Automatic], [y Manual] [ - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 153
Mode] [Y Video Light] [d Pre REC] [Drive Mode] [O Digital Effects] [Image Stabilizer] Setting options/Function 430 [2] (manual focus): controls, g control, z z 46, [b] (digital tele-converter): Toggle on (x) or 80 off (w) [z Automatic], [y Manual]: (0 dB - 24 dB) z - 76 [Q Evaluative], - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 154
snapshot scenes) Z: Original video snapshot scenes u: SD scenes on memory card Y Control Button Target Scenes/Function 1 sZu 0 [Copy (497)] [Selected Scenes] z - z - 130 c [All Scenes] zzz - [Copy (f97)] [This Scene] (from the Timeline screen) z - z - [Convert HD9SD (x DVD)] [Selected - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 155
[Edit] Panel - Mode Control Button [Copy (497)] c [Copy (f97)] [Delete] [Protect] [Print Orders] [Rotate] Index Screen [Selected Photos], [All Photos] - Single Photo View 0 z 131 z 106 z 118 z 123 z 117 Additional Information 155 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 156
Setup Menus 7 / 8 Camera Setup Menu item [Digital Zoom] [Zoom Speed] [AF Mode] [AF- [A On o], [B Off] [A On], [B Off] [A On], [B Off] [U Off], [V Vivid], [W Neutral], [X Low Sharpening], [Y Soft Skin Detail], [Z Custom Effect] [O Automatic], [B Off Z] [O Automatic], [A On V] [z Surround], [w - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 157
Limit] [B Off], [X Focus], [e Exposure], [o Tv / Av] [POWERED IS Button] [x Press and Hold], [y Toggle On/Off] 430 z - 89 -z z - 65 * Option available only when the optional SM-V1 Surround Microphone is attached to the camcorder after having updated the camcorder's firmware using the memory card - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 158
manually (0 76). • Using focus assistance will not affect the recordings. It will be cancelled automatically after 4 seconds or when you start recording. [Auto Slow Shutter]: The camcorder pro- gram is set to [A Programmed AE], but the setting will not change even if you set the camcorder - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 159
]: Helps prevent audio distortions due to high audio recording levels when the optional SM-V1 Surround Microphone is attached to the camcorder. When set to [A On V], V will appear on the screen. [Onscreen Markers]: You can display a grid or a horizontal line at the center of the screen. Use the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 160
8 Recording & Connections Setup Menu item [Self Timer] [Video Snapshot Length] [Rec Media for Movies] [Recording Mode] [Frame Rate] ]: [B] (Off), [57] [h High Quality 24 Mbps], [i High Quality 17 Mbps], [j High Quality 12 Mbps], [l Standard Play 7 Mbps], [k Long Play 5 Mbps] [C 60i (Standard)], [E - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 161
[G Normal] [Photo Capture from [A Single Photo], Video] [B Photo Sequence] [Photo Capture Quality] [P Super Fine / 1920x1080], [Q Fine / Off], [ Color Bars], [ Color Bars & Tone] [Auto Rotate] [A On], [B Off] [Photo Review Time] [BOff], [i 2 sec], [j 4 sec], [k 6 sec], [l 8 sec], [m 10 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 162
to standard definition in the camcorder. [z 24F]: 24 frames per second, progressive. Using this frame rate will achieve the same cinematic look as [E PF24], the difference being that video is recorded as true 24p. Use the supplied software ImageMixer 3 SE to convert movies recorded with this frame - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 163
camcorder on its side), will be rotated automatically and displayed correctly during playback. [Photo Review Time]: Selects the time to display a photo after it has been recorded. • The review the name and location of the file on the memory card. For example, the file name of a photo numbered 1010107 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 164
Displays the date and/or time when the scene was recorded. [L Camera Data]: Displays the aperture (f-stop) and shutter speed used when recording the scene. [TV Type]: When you connect the camcorder to a TV using the supplied STV-250N Stereo Video Cable, select the setting according to the type of - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 165
l zzzz - [A On], [B Off] zzzz - [AV/Headphones] [H AV], [J Headphones] [Volume] Speaker: q h, r Headphone: c d, e [Notification Sounds] [N High Volume], [M Low Volume], [B Off] [Wireless Remote Control] [A On], [B Off L] [Power Saving Mode] [Auto Power Off]: [A On], [B Off] z - z z 85 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 166
Start Day] [Saturday], [Sunday], [Monday] - -z- - [Battery Info] - zzzz - [Control for HDMI]2 [A On], [B Off Firmware] - - - -z- [Eye-Fi Communication]3 [O Automatic], [B Off] z z z z 150 1 Option not available from the [Playlist] index screen. 2 Option not available when the camcorder - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 167
information may be dis- played in shortened form (icons only, etc.). Some screens will be displayed using the small font size regardless of the setting. [Output Onscreen Displays] • When set to [A On], the camcorder's onscreen displays will appear also on the screen of a TV or monitor connected to - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 168
control to play back your recordings. • Depending on the TV set, additional settings may be required on the TV itself to activate the HDMI-CEC function. Refer to the TV's instruction manual. • Correct operation of the HDMI-CEC function cannot be guaranteed even when connecting the camcorder to - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 169
cancel the demo mode once it has started, press any button or turn off the camcorder. [Reset All]: Resets all the camcorder's settings to default values. [Firmware]: You can verify the current version of the camcorder's firmware. This menu option is usually unavailable. Additional Information 169 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 170
mode (0 30) 4 In record pause mode: Total number of scenes 5 Memory operation (0 174) 6 Remaining battery time (0 174) 7 Zoom (0 46) 8 Recording mode (0 60) 9 Control button: Start/Stop video recording A q Face detection frame (0 67) A a Touch & Track frame (0 68) 170 Additional Information - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 171
R Instant AF (0 157), MF Manual focus (0 76) A g Manual exposure (0 74) A h AGC ( (0 64) S g Digital tele-converter (0 80) S h PF24 progressive Face detection (0 67) D q Photo quality/size (simultaneous recording) (0 114) output (0 85) D l Mini video light (0 82) F q Microphone directionality of - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 172
mode (0 113) dF Light metering mode (0 115) F f Control button: Last function used ([MENU] in this case) F g Self timer (0 83) hF Flash (0 111) jF Eye-Fi wireless communication (0 150) kF Number of available photos 4, 7 On memory card X or Y c f In the built-in memory F l Photo quality/size (0 109 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 173
panel H h Control button: Slideshow (0 116) H j Control button: Open the Edit panel (0 155) H k Control button: Switch to [Photos] index screen (0 104) H l Manual focus (0 76) J q File size J a Photo size (0 109) J s Shutter speed (0 71) J d Aperture value (0 71) Additional Information 173 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 174
on the conditions under which the camcorder and the battery pack are used, the actual battery charge may not be indicated accurately. • When the camcorder is off, press R to display the charge status of a battery pack. The Intelligent System will display the charge status (as a percentage - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 175
" box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists. CHECK THIS FIRST Power supply • Is the battery charged? Is the compact power adapter correctly con- nected to the camcorder? (0 22) Recording • Did you turn the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 176
is exhausted extremely quickly even at normal temperatures. - The battery may have reached the end of its battery life. Buy a new battery pack. Recording Pressing g will not start recording. - You cannot record while the camcorder is writing previous recordings onto the memory (while the ACCESS - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 177
it only for a short while, it may indicate a problem with the camcorder. Consult a Canon Service Center. Playback Cannot add scenes to the playlist. - The Then, transfer the music files first and only then write the video files back to the memory. - Music tracks will not play back correctly if the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 178
playing scenes/a slideshow linked to external audio, the video playback is not correctly linked to the external player. - The volume of external player may be too low in red on the screen. - The camcorder has malfunctioned. Consult a Canon Service Center. Even after stopping recording, the ACCESS - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 179
after a short time. If the problem still persists, use the 6 8 [Reset All] menu option to reset all the camcorder's settings to default values. Video noise appears on screen. - Keep a distance between the camcorder and devices that emit strong electromagnetic fields (plasma TVs, cellular phones, etc - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 180
volume is turned off. Adjust the volume. - If the STV-250N Stereo Video Cable is connected to the camcorder, disconnect it. - The AV terminal is set to headphone output. Set 88 [AV/Headphones] to [AV]. Memory Card and Accessories Cannot insert the memory card. - The memory card was not facing the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 181
Video noise appears on the TV screen. - When using the camcorder in a room where a TV is TV. Activate this function on the TV. - Even with TV sets compatible with HDMI-CEC the range of functions available differs depend- ing on the type of TV. Refer to the instruction manual of the connected TV - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 182
camcorder. After a short while, turn it on again and restore the connection. - Connect the camcorder to a different USB port on the computer. - The camcorder will print correctly, using a PictBridge-compatible printer, photos whose file names have been changed or that were recorded, created, edited - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 183
pack? - You attached a battery pack that is not recommended by Canon for use with this camcorder. - If you are using a battery pack recommended by Canon for use with this camcorder, there may be a problem with the camcorder or battery pack. Consult a Canon Service Center. Additional Information - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 184
now - The camcorder cannot enter standby mode if the remaining battery charge is too low. Charge or replace the battery pack (0 22). Cannot play back - There is a problem with the memory. If this message appears often without apparent reason, contact a Canon Service Center. c Cannot play back Cannot - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 185
memory card with this camcorder (0 40). Cannot record - You cannot capture video snapshot scenes from scenes recorded or edited using another device. - There is a problem with the memory. If this message appears often without apparent reason, contact a Canon Service Center. c Cannot record Cannot - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 186
Turn off the camcorder and remove and reinsert the memory card. If 4 / 7 turns back to green you can resume recording/playback. If the problem persists, save your cable before using the camcorder. - To be able to write back scenes and to transfer music files to the camcorder, power the cam- corder - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 187
will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder camcorder - There is a problem with the file system that prevents accessing the selected memory. Initialize the memory with this camcorder (PAL or SECAM). Play back the recordings in - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 188
Need to recover files from the memory card. Change the position of the LOCK switch on the memory card. - This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card and later the position of the card - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 189
card Y. Task in progress. Do not disconnect the power source. - The camcorder is updating the memory. Wait until the operation ends and do not disconnect the compact power adapter or remove the battery pack. The camcorder is set to photo mode - You pressed g while recording photos ( or mode - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 190
restore the connection after a short while. Total play time is too long - The playlist cannot be converted when its total playback time exceeds 2 hours while the camcorder is connected to the optional DW-100 DVD Burner, refer to the following section and also to the instruction manual of the DVD - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 191
after cleaning the recording surface with a clean, soft cloth. If the problem persists, replace with a different disc. Error reading the data - . Reduce the number of photos. File error - You attempted to print a photo that was recorded with another camcorder, has a different compression, or was - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 192
. (Canon PIXMA printers: the printer's green power lamp and orange error lamp flash alternately.) - Disconnect the USB cable and turn off the printer. Unplug the printer's power cord from the power outlet and contact the appropriate customer support center or service center. Printer in use - The - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 193
Settings]. Set [Paper Settings] to [Default] or a paper size supported by the printer used. - Cancel printing, disconnect the USB cable and instruction manual. • If you cannot solve the problem even after consulting this list and the printer's instruction manual, contact the closest Canon Service - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 194
direct sunlight), or high humidity. • Do not use the camcorder near strong electromagnetic fields such as above TVs, near plasma TVs or mobile phones. • Do not point the lens or the viewfinder (b only) at strong light sources. Do not leave the camcorder pointed at a bright subject. • Do not use or - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 195
as necessary. Long-term storage If you do not intend to use the camcorder for a long time, store it in a place free of dust, in low humidity, and at temperatures not higher than 30 °C (86 °F). Battery Pack DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 196
or to the optional CG-800 Battery Charger. • We recommend using genuine Canon battery packs bearing the Intelligent System mark. • If you attach to the camcorder battery packs that are not genuine Canon battery packs, will appear and the remaining battery time will not be displayed. Memory Card • We - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 197
LOCK position. LOCK switch Built-in Rechargeable Lithium Battery The camcorder has a built-in rechargeable lithium battery to keep the date/time and other settings. The built-in lithium battery is recharged while you use the camcorder; however, it will discharge completely if you do not use the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 198
for details. Disposal When you delete movies or initialize the memory, only the file allocation table is altered and stored data is not physically erased. Take the necessary precautions when you dispose of the camcorder or memory card, for example by physically damaging it to prevent the leakage of - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 199
Body • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens, Viewfinder (b only) and Instant AF Sensor • If the lens surface or Instant AF sensor is dirty, autofocus may not work properly. • Remove any dust or - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 200
to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug adapters for overseas use. Playback on a TV Screen You can only play back your recordings on TVs compatible with the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 201
* 6 CA-570 Compact Power Adapter Sa STV-250N Stereo Video Cable 7 DW-100 DVD Burner Ss ZR-1000 Zoom Remote Controller Ah IFC-300PCU USB Cable Sd ZR-2000 Zoom Remote Controller Aj Memory card * Supplied with the camcorder; not available as an optional accessory. Additional Information 201 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 202
Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center. Use of genuine Canon accessories is recommended. This product is designed to achieve excellent - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 203
times given in the following table are approximate and vary according to charging conditions and initial charge of the battery pack. Battery pack→ Charging conditions↓ Using the camcorder Using the CG-800 Battery Charger BP-808 BP-809 150 min. 105 min. BP-819 260 min. 190 min. BP-827 385 min - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 204
c Using the built-in memory Battery pack BP-808 BP-809 BP-819 BP-827 Recording mode MXP FXP XP+ SP LP MXP FXP XP+ SP LP MXP FXP XP+ SP - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 205
Using a memory card Battery pack BP-808 BP-809 BP-819 BP-827 Recording mode MXP FXP stop, zooming, and power on/off. ** b only. 8 TL-H58 Tele-converter This Tele-converter lens increases the focal length of the camcorder lens by a factor of 1.5. • The image stabilizer is not as effective when the - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 206
the Wide-converter is attached, a shadow may appear in the picture when you use the flash. Aq Protect Filter 58 mm, ND4-L Filter 58 mm, ND8-L Filter 58 mm Neutral density and MC protector filters help you to control difficult lighting conditions. Aa SC-2000 Soft Carrying Case A handy camcorder bag - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 207
connection, allowing you to enjoy playback at the highest quality. This cable sends both video and audio signals. This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark. Additional Information - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 208
-0590-002) 6906A001AA Optional Accessories BP-809 Battery Pack BP-819 Battery Pack BP-827 Battery Pack CG-800 Battery Charger TL-H58 Tele-converter WD-H58 Wide-converter Protect Filter 58 mm ND4-L Filter 58 mm ND8-L Filter 58 mm VL-5 Video Light VFL-2 Video Flash Light SM-V1 Surround Microphone DM - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 209
Specifications VIXIA HF S21 / VIXIA HF S20 / VIXIA HF S200 - Values given are approximate figures. System • Recording System Movies: AVCHD Video compression: MPEG-4 AVC/H.264; Audio compression: Dolby Digital 2ch; Dolby Digital 5.1ch* * Only when using the optional SM-V1 Surround Microphone. - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 210
ft.); 1 cm (0.39 in.) at full wide angle • White Balance Auto white balance, Custom white balance or Preset white balance settings: Daylight, Shade, Cloudy, Tungsten, Fluorescent, Fluorescent H • Minimum Illumination 0.3 lx ([Low Light] recording program, Shutter speed at 1/2) 4 lx ([Programmed - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 211
mm stereo minijack Power/Others • Power supply (rated) 7.4 V DC (battery pack), 8.4 V DC (compact power adapter) • Power consumption c x 2.9 x 5.8 in.) e 75 x 74 x 140 mm (3.0 x 2.9 x 5.5 in.) • Weight (camcorder body only) b 470 g (1.0 lb.) e 460 g (16.2 oz.) CA-570 Compact Power Adapter • Power - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 212
About the music files The specifications of the music files compatible with the camcorder are as follows. Audio encoding: Linear PCM Audio sampling: 48 kHz, 16 bits, 2 channels Minimum length: 1 second File extension: WAV The music data is saved in the memory under the following folder structure. c - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 213
, 127 AVCHD specifications 8 B Background music 93 Battery pack Battery information . . . . 168, 174 Charging 22 Remaining charge indicator 174 Beach (recording program 62 Built-in backup battery 197 C Calendar 56 Camcorder supplemental disc . . . . 18 Capturing photos/video snapshot scenes - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 214
26, 29 Light metering mode 115 Low light (recording program) . . . . .62 M Magnifying photos 117 Maintenance 199 Manual exposure 74 Manual focus 76 Markers 159 Memory card 36, 196 MIC terminal 88 Microphone attenuator . . . . . 158, 159 Mini advanced shoe 86 Mini video light 82 Mode - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 215
51, 86 W White balance 79 Wide angle 46 Wind screen 158 Wireless controller 24 Z Zebra pattern 75 Zoom 46 Digital zoom 157 Zoom speed 46, 156 T Telephoto 46 Time zone/DST 35 Timeline 91 Touch & Track 68 Touch AE 74 Touch AF 76 Tripod 195 Troubleshooting 175 Tv (recording program 71 - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 216
service facilities located in the United States. When returning Equipment under this warranty, you must pre-pay the shipping charges, and you must enclose the Bill of Sale or other proof of purchase with a complete explanation of the problem. During the ONE-YEAR warranty period, repairs will - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 217
DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA BE GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON USA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE GIFT. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 218
the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with the Equipment that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility - Canon HFS21 | VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 219
Fax: +852 2428 3963 For support concerning the supplied PIXELA applications, please call PIXELA customer support (details in the 'PIXELA Applications' Installation Guide). Pour le support technique concernant les logiciels PIXELA fournis, veuillez appeler le service clientèle de PIXELA (les details
PUB. DIM-0949-000
English
Français
Español
HD Camcorder
Inst
st
ruction Manual
HD Camcorder
Instruction Manual
Caméscope HD
Manuel d'instruction
Videocámara HD
Manual de Instrucciones