Canon HV10 HV10 Instruction Manual - Page 73
Troubleshooting
UPC - 013803063776
View all Canon HV10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Trouble? 73 Additional Information Trouble? Troubleshooting E If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Solution • Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery pack. 18 • The camcorder switches off by itself. • The cassette compartment cover will not open. Attach the battery pack correctly. • The cassette compartment stopped half way while inserting/removing a tape. Use the compact power adapter. • The LCD/viewfinder switches on and off. Battery pack will not charge. Charge the battery pack in temperatures between 0 °C and - 40 °C (32 °F and 104 °F). Battery packs become hot with use and may not charge. The - charging will start once the battery pack temperature is below 40 °C (104 °F). The battery pack is damaged. Use a different battery pack. - Check that the compact power adapter is correctly connected to the camcorder. Recording/Playback Problem Solution Buttons will not work. Turn on the camcorder. - Load a cassette. 19 Abnormal characters appear on Disconnect the power source and reconnect it after a short time. - the screen. The camcorder If the problem still persists, disconnect the power source and does not operate properly. press the RESET button with a pointed item. Pressing the RESET button resets all settings. " " flashes on the screen. Load a cassette. 19 " " flashes on the screen. Battery pack is exhausted. Replace or charge the battery pack. 18 " " flashes on the screen. Condensation is detected. See reference page. 82 The lens cover is not Turn the camcorder off and then on again. - completely open. " " flashes red on the screen. The camcorder malfunctions. Consult a Canon Service Center. - "REMOVE THE CASSETTE" Remove the cassette and reinsert it. 19 appears on the screen. The wireless controller will not Set [WL.REMOTE] to [ON]. 37 work. The battery of the wireless controller is exhausted. Replace the 21 battery. Additional Information