Canon MF6550 imageCLASS MF6500 Series Starter Guide - Page 4
Load Paper, Set Up the Paper Cassette to Fit the Paper Size
UPC - 013803056044
View all Canon MF6550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Load Paper 1 2 Pull out the paper cassette until it stops. Even the edges of the paper stack. Set Up the Paper Cassette to Fit the Paper Size 1 2 Incline the rear paper end guide until it is unlocked, then remove it from the paper cassette. Attach the guide to the slots of the desired paper size. 3 B A C B Load the paper stack print side up. NOTE Make sure the back edge of the paper stack touches the rear paper end guide (C), the paper stack should not exceed the load limit mark (A), and the load is under the hooks (B) on the paper guides. 4 Gently insert the paper cassette as far as it will go. CAUTION Be careful not to get your fingers caught. NOTE For loading paper in the multi-purpose tray, see Chapter 3, "Print Media," in the Basic Guide. Connect Telephone Cables (MF6550/MF6560/MF6580 Only) B A Connect the supplied telephone cable to the line jack (A) and the wall jack. Connect your external telephone to the external device jack (B) if required. 5 6