Canon MF7280 imageCLASS MF7280 PCL/UFR II Printer Guide - Page 38
Network Quick Start, Guide
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Printing does not start. Cause 1 Output tray is full of paper during the print job. Remedy Remedy Remove the paper in the tray. Cause 2 The machine and host computer are not properly connected. Remedy Check the cable connection between the host computer and machine. (See Chapter 1, "Connecting the Machine to a Network" in the Network Quick Start Guide.) Cause 3 A failure occurred in the machine or an optional device. 3 Remedy Take appropriate measures according to the message on the touch panel display. Troubleshooting Cause 4 The paper size set in the drawer is different from the paper size you have set up in the application software. Or an appropriate paper size you have set for enlarging or reducing the copy is not set. Remedy 1 Change the paper in the selected drawer to the paper size you have set in the application software (or to the size you have set for enlarging/reducing copy). Then print it again. Remedy 2 Select the drawer with the appropriate paper size you have set up in the application software (or to the size you have set for enlarging/reducing copy). Then print it again. Cause 5 Paper in the drawer or the stack bypass has run out. Remedy Load more paper. Printing Problems 3-3